| Message ID | 20240227120939.290143-19-angelogioacchino.delregno@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ASoC: Cleanup MediaTek soundcard machine drivers | expand |
On 27/02/2024 13:09, AngeloGioacchino Del Regno wrote: > Document the dai-link subnodes and the audio-routing property, allowing > to describe machine specific audio hardware and links in device tree. > > While at it, also deprecate the old properties which were previously > used with driver hardcoded configuration. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > --- > > mediatek,adsp: > $ref: /schemas/types.yaml#/definitions/phandle > @@ -45,12 +56,75 @@ properties: > A list of the desired dai-links in the sound card. Each entry is a > name defined in the machine driver. > > +patternProperties: > + ".*-dai-link$": > + type: object > + description: > + Container for dai-link level properties and CODEC sub-nodes. > + > + properties: > + link-name: > + description: Indicates dai-link name and PCM stream name > + items: That's not a list, but just enum. > + enum: > + - DPTX_BE > + - ETDM1_IN_BE > + - ETDM2_IN_BE > + - ETDM1_OUT_BE > + - ETDM2_OUT_BE > + - ETDM3_OUT_BE > + - PCM1_BE > + > + codec: > + description: Holds subnode which indicates codec dai. > + type: object > + additionalProperties: false > + properties: > + sound-dai: > + minItems: 1 > + maxItems: 2 > + required: > + - sound-dai > + > + dai-format: > + description: audio format > + items: Ditto > + enum: > + - i2s > + - right_j > + - left_j > + - dsp_a > + - dsp_b > + > + mediatek,clk-provider: > + $ref: /schemas/types.yaml#/definitions/string > + description: Indicates dai-link clock master. > + items: Ditto > + enum: > + - cpu > + - codec > + > + additionalProperties: false This goes either to the top of the section (after type:object) for readability or after required: block below. > + > + required: > + - link-name > + > additionalProperties: false > > required: > - compatible > - mediatek,platform > > +# Disallow legacy properties if dai-link-xxx nodes are specified > +if: > + not: I don't think this works. To test if node is present or node, you would need to use required. https://elixir.bootlin.com/linux/v6.4-rc7/source/Documentation/devicetree/bindings/net/qcom,ipa.yaml#L174 Are you sure this if:then: works as expected? > + patternProperties: > + ".*-dai-link$": false > +then: > + properties: > + mediatek,dptx-codec: false > + mediatek,hdmi-codec: false > + > examples: > - | > Best regards, Krzysztof
Il 29/02/24 09:25, Krzysztof Kozlowski ha scritto: > On 27/02/2024 13:09, AngeloGioacchino Del Regno wrote: >> Document the dai-link subnodes and the audio-routing property, allowing >> to describe machine specific audio hardware and links in device tree. >> >> While at it, also deprecate the old properties which were previously >> used with driver hardcoded configuration. >> >> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> >> --- > > >> >> mediatek,adsp: >> $ref: /schemas/types.yaml#/definitions/phandle >> @@ -45,12 +56,75 @@ properties: >> A list of the desired dai-links in the sound card. Each entry is a >> name defined in the machine driver. >> >> +patternProperties: >> + ".*-dai-link$": >> + type: object >> + description: >> + Container for dai-link level properties and CODEC sub-nodes. >> + >> + properties: >> + link-name: >> + description: Indicates dai-link name and PCM stream name >> + items: > > That's not a list, but just enum. > Ok! Will change for v2. >> + enum: >> + - DPTX_BE >> + - ETDM1_IN_BE >> + - ETDM2_IN_BE >> + - ETDM1_OUT_BE >> + - ETDM2_OUT_BE >> + - ETDM3_OUT_BE >> + - PCM1_BE >> + >> + codec: >> + description: Holds subnode which indicates codec dai. >> + type: object >> + additionalProperties: false >> + properties: >> + sound-dai: >> + minItems: 1 >> + maxItems: 2 >> + required: >> + - sound-dai >> + >> + dai-format: >> + description: audio format >> + items: > > Ditto > >> + enum: >> + - i2s >> + - right_j >> + - left_j >> + - dsp_a >> + - dsp_b >> + >> + mediatek,clk-provider: >> + $ref: /schemas/types.yaml#/definitions/string >> + description: Indicates dai-link clock master. >> + items: > > Ditto > >> + enum: >> + - cpu >> + - codec >> + >> + additionalProperties: false > > This goes either to the top of the section (after type:object) for > readability or after required: block below. > I think I actually saw this in some other binding, that's why it's there... or maybe I am confusing something else - whatever. I'll move it, anyway - thanks >> + >> + required: >> + - link-name >> + >> additionalProperties: false > >> >> required: >> - compatible >> - mediatek,platform >> >> +# Disallow legacy properties if dai-link-xxx nodes are specified >> +if: >> + not: > > I don't think this works. To test if node is present or node, you would > need to use required. > https://elixir.bootlin.com/linux/v6.4-rc7/source/Documentation/devicetree/bindings/net/qcom,ipa.yaml#L174 > > Are you sure this if:then: works as expected? > Honestly, coming up with something that worked took me almost a full hour. I was going a bit crazy over this one :-) btw - Yes, it does work. If you wanna give it a shot too, patch 21 and 22 are introducing the audio-routing and (x)-dai-link nodes in (respectively) mt8195-cherry.dtsi and mt8186-corsola.dtsi devicetrees - and those do validate just fine both with and without those patches. I also tested this by adding the forbidden dptx-codec/hdmi-codec properties along with the dai-link nodes in the example of this yaml file, and I've verified that adding those makes the validation fail as expected. Exactly, this is what I want and also what I've tested with dtbs/dt_binding_check: fmt: (test nodes/properties) <- (result) x-dai-link { ... }; mediatek,dptx-codec = <...>; <- FAIL (OK) x-dai-link { ... }; mediatek,hdmi-codec = <...>; <- FAIL (OK) x-dai-link { ... }; mediatek,dptx-codec = ..; mediatek,hdmi-codec .. <- FAIL (OK) x-dai-link { ... }; (none of those two) <- PASS (OK) (NO x-dai-link) mediatek,dptx-codec = <...> <- PASS (OK) (NO x-dai-link) mediatek,hdmi-codec = <...> <- PASS (OK) (NO x-dai-link) mediatek,dptx-codec = <...> mediatek,hdmi-codec = <...> <- PASS(OK) ...and of course, also tested the easy part dai-link-x { ... }; <- FAIL (OK) :-) Cheers, Angelo > >> + patternProperties: >> + ".*-dai-link$": false >> +then: >> + properties: >> + mediatek,dptx-codec: false >> + mediatek,hdmi-codec: false >> + >> examples: >> - | >> > > > Best regards, > Krzysztof >
diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml index c1ddbf672ca3..2334aa39df18 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml @@ -23,6 +23,15 @@ properties: $ref: /schemas/types.yaml#/definitions/string description: User specified audio sound card name + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + Valid names could be the input or output widgets of audio components, + power supplies, MicBias of codec and the software switch. + mediatek,platform: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 ASoC platform. @@ -30,10 +39,12 @@ properties: mediatek,dptx-codec: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 Display Port Tx codec node. + deprecated: true mediatek,hdmi-codec: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 HDMI codec node. + deprecated: true mediatek,adsp: $ref: /schemas/types.yaml#/definitions/phandle @@ -45,12 +56,75 @@ properties: A list of the desired dai-links in the sound card. Each entry is a name defined in the machine driver. +patternProperties: + ".*-dai-link$": + type: object + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: Indicates dai-link name and PCM stream name + items: + enum: + - DPTX_BE + - ETDM1_IN_BE + - ETDM2_IN_BE + - ETDM1_OUT_BE + - ETDM2_OUT_BE + - ETDM3_OUT_BE + - PCM1_BE + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + dai-format: + description: audio format + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + items: + enum: + - cpu + - codec + + additionalProperties: false + + required: + - link-name + additionalProperties: false required: - compatible - mediatek,platform +# Disallow legacy properties if dai-link-xxx nodes are specified +if: + not: + patternProperties: + ".*-dai-link$": false +then: + properties: + mediatek,dptx-codec: false + mediatek,hdmi-codec: false + examples: - | @@ -59,6 +133,55 @@ examples: mediatek,platform = <&afe>; pinctrl-names = "default"; pinctrl-0 = <&aud_pins_default>; + + audio-routing = + "Headphone", "HPOL", + "Headphone", "HPOR", + "IN1P", "Headset Mic", + "Ext Spk", "Speaker"; + + mm-dai-link { + link-name = "ETDM1_IN_BE"; + mediatek,clk-provider = "cpu"; + }; + + hs-playback-dai-link { + link-name = "ETDM1_OUT_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&headset_codec>; + }; + }; + + hs-capture-dai-link { + link-name = "ETDM2_IN_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&headset_codec>; + }; + }; + + spk-playback-dai-link { + link-name = "ETDM2_OUT_BE"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&spk_amplifier>; + }; + }; + + hdmi-dai-link { + link-name = "ETDM3_OUT_BE"; + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + displayport-dai-link { + link-name = "DPTX_BE"; + codec { + sound-dai = <&dp_tx>; + }; + }; }; ...
Document the dai-link subnodes and the audio-routing property, allowing to describe machine specific audio hardware and links in device tree. While at it, also deprecate the old properties which were previously used with driver hardcoded configuration. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- .../bindings/sound/mt8195-mt6359.yaml | 123 ++++++++++++++++++ 1 file changed, 123 insertions(+)