diff mbox series

[v4,9/9] arm64: dts: mediatek: mt8188: Add eDP and DP TX nodes

Message ID 20241014111053.2294519-10-fshao@chromium.org (mailing list archive)
State New
Headers show
Series Add platform supports to MediaTek MT8188 SoC (part 2) | expand

Commit Message

Fei Shao Oct. 14, 2024, 11:09 a.m. UTC
Add edp-tx and dp-tx nodes for the Embedded DisplayPort (eDP) and
DisplayPort ports to connect to DP-INTF ports and panels, and add the
efuse cell for the DP calibration data.

Individual board device tree should enable the nodes and connect input
and output ports as needed.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

(no changes since v1)

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 6f5727f05255..e47fe1f453a0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -2016,6 +2016,10 @@  efuse: efuse@11f20000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			dp_calib_data: dp-calib@1a0 {
+				reg = <0x1a0 0xc>;
+			};
+
 			lvts_efuse_data1: lvts1-calib@1ac {
 				reg = <0x1ac 0x40>;
 			};
@@ -2877,5 +2881,27 @@  padding7: padding@1c124000 {
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x4000 0x1000>;
 		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8188-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			nvmem-cells = <&dp_calib_data>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8188_POWER_DOMAIN_EDP_TX>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8188-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			nvmem-cells = <&dp_calib_data>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8188_POWER_DOMAIN_DP_TX>;
+			max-linkrate-mhz = <5400>;
+			status = "disabled";
+		};
 	};
 };