diff mbox series

[08/17] wifi: mt76: mt7925: Enhance mt7925_mac_link_bss_add to support MLO

Message ID 20241211011926.5002-8-sean.wang@kernel.org (mailing list archive)
State New
Headers show
Series [01/17] wifi: mt76: connac: Extend mt76_connac_mcu_uni_add_dev for MLO | expand

Commit Message

Sean Wang Dec. 11, 2024, 1:19 a.m. UTC 
From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>

In mt7925_mac_link_bss_add(), the mt76_connac_mcu_uni_add_dev() function
must be executed only after all parameters have been properly initialized.

Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7925/main.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index 97b48fda5595..93e00a3840fe 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -365,18 +365,14 @@  static int mt7925_mac_link_bss_add(struct mt792x_dev *dev,
 	mconf->mt76.omac_idx = ieee80211_vif_is_mld(vif) ?
 			       0 : mconf->mt76.idx;
 	mconf->mt76.band_idx = 0xff;
-	mconf->mt76.wmm_idx = mconf->mt76.idx % MT76_CONNAC_MAX_WMM_SETS;
+	mconf->mt76.wmm_idx = ieee80211_vif_is_mld(vif) ?
+			      0 : mconf->mt76.idx % MT76_CONNAC_MAX_WMM_SETS;
 
 	if (mvif->phy->mt76->chandef.chan->band != NL80211_BAND_2GHZ)
 		mconf->mt76.basic_rates_idx = MT792x_BASIC_RATES_TBL + 4;
 	else
 		mconf->mt76.basic_rates_idx = MT792x_BASIC_RATES_TBL;
 
-	ret = mt76_connac_mcu_uni_add_dev(&dev->mphy, link_conf, &mconf->mt76,
-					  &mlink->wcid, true);
-	if (ret)
-		goto out;
-
 	dev->mt76.vif_mask |= BIT_ULL(mconf->mt76.idx);
 	mvif->phy->omac_mask |= BIT_ULL(mconf->mt76.omac_idx);
 
@@ -395,6 +391,12 @@  static int mt7925_mac_link_bss_add(struct mt792x_dev *dev,
 	ewma_rssi_init(&mconf->rssi);
 
 	rcu_assign_pointer(dev->mt76.wcid[idx], &mlink->wcid);
+
+	ret = mt76_connac_mcu_uni_add_dev(&dev->mphy, link_conf, &mconf->mt76,
+					  &mlink->wcid, true);
+	if (ret)
+		goto out;
+
 	if (vif->txq) {
 		mtxq = (struct mt76_txq *)vif->txq->drv_priv;
 		mtxq->wcid = idx;