diff mbox series

[net-next,v3,3/6] dt-bindings: net: dsa: add new MT7531 binding to support MT7531

Message ID 4ec3c9e6a219c09fc90d1be8d3d63da587ef6fba.1599228079.git.landen.chao@mediatek.com (mailing list archive)
State New, archived
Headers show
Series net-next: dsa: mt7530: add support for MT7531 | expand

Commit Message

Landen Chao Sept. 4, 2020, 2:21 p.m. UTC
Add devicetree binding to support the compatible mt7531 switch as used
in the MediaTek MT7531 switch.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
---
 Documentation/devicetree/bindings/net/dsa/mt7530.txt | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

Comments

Jakub Kicinski Sept. 5, 2020, 11:37 p.m. UTC | #1
On Fri, 4 Sep 2020 22:21:58 +0800 Landen Chao wrote:
> @@ -32,10 +33,13 @@ Required properties for the child nodes within ports container:
>  
>  - reg: Port address described must be 6 for CPU port and from 0 to 5 for
>  	user ports.
> -- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
> -	 "cpu".
> +- phy-mode: String, the follow value would be acceptable for port labeled "cpu"

... the following values are acceptable for port labeled "cpu":

> +	If compatible mediatek,mt7530 or mediatek,mt7621 is set,
> +	must be either "trgmii" or "rgmii"
> +	If compatible mediatek,mt7531 is set,
> +	must be either "sgmii", "1000base-x" or "2500base-x"
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index c5ed5d25f642..e22cd56d83fe 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -5,6 +5,7 @@  Required properties:
 
 - compatible: may be compatible = "mediatek,mt7530"
 	or compatible = "mediatek,mt7621"
+	or compatible = "mediatek,mt7531"
 - #address-cells: Must be 1.
 - #size-cells: Must be 0.
 - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
@@ -32,10 +33,13 @@  Required properties for the child nodes within ports container:
 
 - reg: Port address described must be 6 for CPU port and from 0 to 5 for
 	user ports.
-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
-	 "cpu".
+- phy-mode: String, the follow value would be acceptable for port labeled "cpu"
+	If compatible mediatek,mt7530 or mediatek,mt7621 is set,
+	must be either "trgmii" or "rgmii"
+	If compatible mediatek,mt7531 is set,
+	must be either "sgmii", "1000base-x" or "2500base-x"
 
-Port 5 of the switch is muxed between:
+Port 5 of mt7530 and mt7621 switch is muxed between:
 1. GMAC5: GMAC5 can interface with another external MAC or PHY.
 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
    of the SOC. Used in many setups where port 0/4 becomes the WAN port.