diff mbox series

[v1] arm: dts: mediatek: add basic support for MT7629 SoC

Message ID a8ca0018ac8a4c5f61a7a1efc9dc5dccd768628b.1552449524.git.ryder.lee@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [v1] arm: dts: mediatek: add basic support for MT7629 SoC | expand

Commit Message

Ryder Lee March 13, 2019, 8:42 a.m. UTC
From: Ryder Lee <ryder.lee@mediatek.com>

This adds basic support for MT7629 reference board.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
Changes since v1:
-Fix unit-address warnings.
-Put all the mmio peripherals under a simple-bus node.
-Drop all the 'partitions' nodes in flash node.
---
 arch/arm/boot/dts/Makefile                |   1 +
 arch/arm/boot/dts/mt7629-rfb.dts          | 203 ++++++++++++++++
 arch/arm/boot/dts/mt7629.dtsi             | 370 ++++++++++++++++++++++++++++++
 include/dt-bindings/reset/mt7629-resets.h |  71 ++++++
 4 files changed, 645 insertions(+)
 create mode 100644 arch/arm/boot/dts/mt7629-rfb.dts
 create mode 100644 arch/arm/boot/dts/mt7629.dtsi
 create mode 100644 include/dt-bindings/reset/mt7629-resets.h

Comments

Matthias Brugger March 13, 2019, 12:04 p.m. UTC | #1
On 13/03/2019 09:42, ryder.lee@kernel.org wrote:
> From: Ryder Lee <ryder.lee@mediatek.com>
> 
> This adds basic support for MT7629 reference board.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> Changes since v1:
> -Fix unit-address warnings.
> -Put all the mmio peripherals under a simple-bus node.
> -Drop all the 'partitions' nodes in flash node.
> ---
>  arch/arm/boot/dts/Makefile                |   1 +
>  arch/arm/boot/dts/mt7629-rfb.dts          | 203 ++++++++++++++++
>  arch/arm/boot/dts/mt7629.dtsi             | 370 ++++++++++++++++++++++++++++++
>  include/dt-bindings/reset/mt7629-resets.h |  71 ++++++
>  4 files changed, 645 insertions(+)
>  create mode 100644 arch/arm/boot/dts/mt7629-rfb.dts
>  create mode 100644 arch/arm/boot/dts/mt7629.dtsi
>  create mode 100644 include/dt-bindings/reset/mt7629-resets.h
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index bd40148..a5a6d9f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1231,6 +1231,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>  	mt7623a-rfb-nand.dtb \
>  	mt7623n-rfb-emmc.dtb \
>  	mt7623n-bananapi-bpi-r2.dtb \
> +	mt7629-rfb.dtb \
>  	mt8127-moose.dtb \
>  	mt8135-evbp1.dtb
>  dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
> diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
> new file mode 100644
> index 0000000..a47dd7e
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7629-rfb.dts
> @@ -0,0 +1,203 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Ryder Lee <ryder.lee@mediatek.com>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "mt7629.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7629 reference board";
> +	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		reset {
> +			label = "factory";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		wps {
> +			label = "wps";
> +			linux,code = <KEY_WPS_BUTTON>;
> +			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x10000000>;
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	reg_5v: regulator-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +};
> +
> +&i2c {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c_pins>;
> +	status = "okay";
> +};
> +
> +&qspi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&qspi_pins>;
> +	status = "okay";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> +
> +&pio {
> +	eth_pins: eth-pins {
> +		mux {
> +			function = "eth";
> +			groups = "mdc_mdio";
> +		};
> +	};
> +
> +	ephy_leds_pins: ephy-leds-pins {
> +		mux {
> +			function = "led";
> +			groups = "gphy_leds_0", "ephy_leds";
> +		};
> +	};
> +
> +	i2c_pins: i2c-pins {
> +		mux {
> +			function = "i2c";
> +			groups =  "i2c_0";
> +		};
> +
> +		conf {
> +			pins = "I2C_SDA", "I2C_SCL";
> +			drive-strength = <4>;
> +			bias-disable;
> +		};
> +	};
> +
> +	pcie_pins: pcie-pins {
> +		mux {
> +			function = "pcie";
> +			groups = "pcie_clkreq",
> +				 "pcie_pereset",
> +				 "pcie_wake";
> +		};
> +	};
> +
> +	pwm_pins: pwm-pins {
> +		mux {
> +			function = "pwm";
> +			groups = "pwm_0";
> +		};
> +	};
> +
> +	/* Serial NAND is shared pin with SPI-NOR */
> +	serial_nand_pins: serial-nand-pins {
> +		mux {
> +			function = "flash";
> +			groups = "snfi";
> +		};
> +	};
> +
> +	spi_pins: spi-pins {
> +		mux {
> +			function = "spi";
> +			groups = "spi_0";
> +		};
> +	};
> +
> +	/* SPI-NOR is shared pin with serial NAND */
> +	qspi_pins: qspi-pins {
> +		mux {
> +			function = "flash";
> +			groups = "spi_nor";
> +		};
> +	};
> +
> +	uart0_pins: uart0-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart0_txd_rxd" ;
> +		};
> +	};
> +
> +	uart1_pins: uart1-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart1_0_tx_rx" ;
> +		};
> +	};
> +
> +	uart2_pins: uart2-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart2_0_txd_rxd" ;
> +		};
> +	};
> +
> +	watchdog_pins: watchdog-pins {
> +		mux {
> +			function = "watchdog";
> +			groups = "watchdog";
> +		};
> +	};
> +};
> +
> +&spi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi_pins>;
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins>;
> +	status = "okay";
> +};
> +
> +&ssusb {
> +	vusb33-supply = <&reg_3p3v>;
> +	vbus-supply = <&reg_5v>;
> +	status = "okay";
> +};
> +
> +&u3phy1 {
> +	status = "okay";
> +};
> +
> +&watchdog {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&watchdog_pins>;
> +	status = "okay";
> +};
> \ No newline at end of file
> diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
> new file mode 100644
> index 0000000..0197660
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7629.dtsi
> @@ -0,0 +1,370 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + *
> + * Author: Ryder Lee <ryder.lee@mediatek.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/mt7629-clk.h>
> +#include <dt-bindings/power/mt7622-power.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/reset/mt7629-resets.h>
> +
> +/ {
> +	compatible = "mediatek,mt7629";
> +	interrupt-parent = <&sysirq>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		enable-method = "mediatek,mt6589-smp";
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x0>;
> +			clock-frequency = <1250000000>;
> +			cci-control-port = <&cci_control2>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x1>;
> +			clock-frequency = <1250000000>;
> +			cci-control-port = <&cci_control2>;
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,cortex-a7-pmu";
> +		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-affinity = <&cpu0>, <&cpu1>;
> +	};
> +
> +	clk20m: oscillator-0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <20000000>;
> +		clock-output-names = "clk20m";
> +	};
> +
> +	clk40m: oscillator-1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <40000000>;
> +		clock-output-names = "clkxtal";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv7-timer";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		clock-frequency = <20000000>;
> +		arm,cpu-registers-not-fw-configured;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		infracfg: syscon@10000000 {
> +			compatible = "mediatek,mt7629-infracfg", "syscon";
> +			reg = <0 0x10000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		pericfg: syscon@10002000 {
> +			compatible = "mediatek,mt7629-pericfg", "syscon";
> +			reg = <0 0x10002000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		scpsys: scpsys@10006000 {
> +			compatible = "mediatek,mt7629-scpsys",
> +				     "mediatek,mt7622-scpsys";

Binding description is missing.

> +			#power-domain-cells = <1>;
> +			reg = <0 0x10006000 0 0x1000>;
> +			clocks = <&topckgen CLK_TOP_HIF_SEL>;
> +			clock-names = "hif_sel";
> +			assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
> +			infracfg = <&infracfg>;
> +		};
> +
> +		timer: timer@10009000 {
> +			compatible = "mediatek,mt7629-timer",
> +				     "mediatek,mt6765-timer";
> +			reg = <0 0x10009000 0 0x60>;
> +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk20m>;
> +			clock-names = "clk20m";
> +		};
> +
> +		sysirq: interrupt-controller@10200a80 {
> +			compatible = "mediatek,mt7629-sysirq",
> +				     "mediatek,mt6577-sysirq";

Same here.

> +			reg = <0 0x10200a80 0 0x20>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +		};
> +
> +		apmixedsys: syscon@10209000 {
> +			compatible = "mediatek,mt7629-apmixedsys", "syscon";
> +			reg = <0 0x10209000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		rng: rng@1020f000 {
> +			compatible = "mediatek,mt7629-rng",
> +				     "mediatek,mt7623-rng";
> +			reg = <0 0x1020f000 0 0x100>;
> +			clocks = <&infracfg CLK_INFRA_TRNG_PD>;
> +			clock-names = "rng";
> +		};
> +
> +		topckgen: syscon@10210000 {
> +			compatible = "mediatek,mt7629-topckgen", "syscon";
> +			reg = <0 0x10210000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		watchdog: watchdog@10212000 {
> +			compatible = "mediatek,mt7629-wdt",
> +				     "mediatek,mt6589-wdt";
> +			reg = <0 0x10212000 0 0x100>;
> +		};
> +
> +		pio: pinctrl@10217000 {
> +			compatible = "mediatek,mt7629-pinctrl";
> +			reg = <0 0x10217000 0 0x8000>,
> +			      <0 0x10005000 0 0x1000>;
> +			reg-names = "base", "eint";
> +			gpio-controller;
> +			gpio-ranges = <&pio 0 0 79>;
> +			#gpio-cells = <2>;
> +			#interrupt-cells = <2>;
> +			interrupt-controller;
> +			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +		};
> +
> +		gic: interrupt-controller@10300000 {
> +			compatible = "arm,gic-400";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			reg = <0 0x10310000 0 0x1000>,
> +			      <0 0x10320000 0 0x1000>,
> +			      <0 0x10340000 0 0x2000>,
> +			      <0 0x10360000 0 0x2000>;
> +		};
> +
> +		cci: cci@10390000 {
> +			compatible = "arm,cci-400";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			reg = <0 0x10390000 0 0x1000>;
> +			ranges = <0 0 0x10390000 0x10000>;
> +
> +			cci_control0: slave-if@1000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace-lite";
> +				reg = <0x1000 0x1000>;
> +			};
> +
> +			cci_control1: slave-if@4000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace";
> +				reg = <0x4000 0x1000>;
> +			};
> +
> +			cci_control2: slave-if@5000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace";
> +				reg = <0x5000 0x1000>;
> +			};
> +
> +			pmu@9000 {
> +				compatible = "arm,cci-400-pmu,r1";
> +				reg = <0x9000 0x5000>;
> +				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		uart0: serial@11002000 {
> +			compatible = "mediatek,mt7629-uart",
> +				     "mediatek,mt6577-uart";

Same here.

Please provide the corresponding patches (one for each component) in v2.
Other then that, patch looks good to me.

Regards,
Matthias

> +			reg = <0 0x11002000 0 0x400>;
> +			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
> +				 <&pericfg CLK_PERI_UART0_PD>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@11003000 {
> +			compatible = "mediatek,mt7629-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11003000 0 0x400>;
> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
> +				 <&pericfg CLK_PERI_UART1_PD>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@11004000 {
> +			compatible = "mediatek,mt7629-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11004000 0 0x400>;
> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
> +				 <&pericfg CLK_PERI_UART2_PD>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		i2c: i2c@11007000 {
> +			compatible = "mediatek,mt7629-i2c",
> +				     "mediatek,mt2712-i2c";
> +			reg = <0 0x11007000 0 0x90>,
> +				  <0 0x11000100 0 0x80>;
> +			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
> +			clock-div = <4>;
> +			clocks = <&pericfg CLK_PERI_I2C0_PD>,
> +				 <&pericfg CLK_PERI_AP_DMA_PD>;
> +			clock-names = "main", "dma";
> +			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		spi: spi@1100a000 {
> +			compatible = "mediatek,mt7629-spi",
> +				     "mediatek,mt7622-spi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0 0x1100a000 0 0x100>;
> +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
> +				 <&topckgen CLK_TOP_SPI0_SEL>,
> +				 <&pericfg CLK_PERI_SPI0_PD>;
> +			clock-names = "parent-clk", "sel-clk", "spi-clk";
> +			status = "disabled";
> +		};
> +
> +		qspi: spi@11014000 {
> +			compatible = "mediatek,mt7629-nor",
> +				     "mediatek,mt8173-nor";
> +			reg = <0 0x11014000 0 0xe0>;
> +			clocks = <&pericfg CLK_PERI_FLASH_PD>,
> +				 <&topckgen CLK_TOP_FLASH_SEL>;
> +			clock-names = "spi", "sf";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		ssusbsys: syscon@1a000000 {
> +			compatible = "mediatek,mt7629-ssusbsys", "syscon";
> +			reg = <0 0x1a000000 0 0x1000>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		ssusb: usb@1a0c0000 {
> +			compatible = "mediatek,mt7629-xhci",
> +				     "mediatek,mtk-xhci";
> +			reg = <0 0x1a0c0000 0 0x01000>,
> +			      <0 0x1a0c3e00 0 0x0100>;
> +			reg-names = "mac", "ippc";
> +			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
> +				 <&ssusbsys CLK_SSUSB_REF_EN>,
> +				 <&ssusbsys CLK_SSUSB_MCU_EN>,
> +				 <&ssusbsys CLK_SSUSB_DMA_EN>;
> +			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
> +			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
> +					  <&topckgen CLK_TOP_SATA_SEL>,
> +					  <&topckgen CLK_TOP_HIF_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
> +						 <&topckgen CLK_TOP_UNIVPLL2_D4>,
> +						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
> +			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
> +			phys = <&u2port0 PHY_TYPE_USB2>,
> +			       <&u3port0 PHY_TYPE_USB3>;
> +			status = "disabled";
> +		};
> +
> +		u3phy1: usb-phy@1a0c4000 {
> +			compatible = "mediatek,generic-tphy-v1";
> +			reg = <0 0x1a0c4000 0 0x300>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			u2port0: usb-phy@1a0c4300 {
> +				reg = <0 0x1a0c4300 0 0x100>;
> +				clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +				status = "okay";
> +			};
> +
> +			u3port0: usb-phy@1a1c4900 {
> +				reg = <0 0x1a1c4900 0 0x700>;
> +				clocks = <&clk20m>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +				status = "okay";
> +			};
> +		};
> +
> +		pciesys: syscon@1a100800 {
> +			compatible = "mediatek,mt7629-pciesys", "syscon";
> +			reg = <0 0x1a100800 0 0x1000>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		ethsys: syscon@1b000000 {
> +			compatible = "mediatek,mt7629-ethsys", "syscon";
> +			reg = <0 0x1b000000 0 0x1000>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		sgmiisys0: syscon@1b128000 {
> +			compatible = "mediatek,mt7629-sgmiisys", "syscon";
> +			reg = <0 0x1b128000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		sgmiisys1: syscon@1b130000 {
> +			compatible = "mediatek,mt7629-sgmiisys", "syscon";
> +			reg = <0 0x1b130000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +	};
> +};
> diff --git a/include/dt-bindings/reset/mt7629-resets.h b/include/dt-bindings/reset/mt7629-resets.h
> new file mode 100644
> index 0000000..6bb8573
> --- /dev/null
> +++ b/include/dt-bindings/reset/mt7629-resets.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7629
> +#define _DT_BINDINGS_RESET_CONTROLLER_MT7629
> +
> +/* INFRACFG resets */
> +#define MT7629_INFRA_EMI_MPU_RST		0
> +#define MT7629_INFRA_UART5_RST			2
> +#define MT7629_INFRA_CIRQ_EINT_RST		3
> +#define MT7629_INFRA_APXGPT_RST			4
> +#define MT7629_INFRA_SCPSYS_RST			5
> +#define MT7629_INFRA_KP_RST			6
> +#define MT7629_INFRA_SPI1_RST			7
> +#define MT7629_INFRA_SPI4_RST			8
> +#define MT7629_INFRA_SYSTIMER_RST		9
> +#define MT7629_INFRA_IRRX_RST			10
> +#define MT7629_INFRA_AO_BUS_RST			16
> +#define MT7629_INFRA_EMI_RST			32
> +#define MT7629_INFRA_APMIXED_RST		35
> +#define MT7629_INFRA_MIPI_RST			36
> +#define MT7629_INFRA_TRNG_RST			37
> +#define MT7629_INFRA_SYSCIRQ_RST		38
> +#define MT7629_INFRA_MIPI_CSI_RST		39
> +#define MT7629_INFRA_GCE_FAXI_RST		40
> +#define MT7629_INFRA_I2C_SRAM_RST		41
> +#define MT7629_INFRA_IOMMU_RST			47
> +
> +/* PERICFG resets */
> +#define MT7629_PERI_UART0_SW_RST		0
> +#define MT7629_PERI_UART1_SW_RST		1
> +#define MT7629_PERI_UART2_SW_RST		2
> +#define MT7629_PERI_BTIF_SW_RST			6
> +#define MT7629_PERI_PWN_SW_RST			8
> +#define MT7629_PERI_DMA_SW_RST			11
> +#define MT7629_PERI_NFI_SW_RST			14
> +#define MT7629_PERI_I2C0_SW_RST			22
> +#define MT7629_PERI_SPI0_SW_RST			33
> +#define MT7629_PERI_SPI1_SW_RST			34
> +#define MT7629_PERI_FLASHIF_SW_RST		36
> +
> +/* PCIe Subsystem resets */
> +#define MT7629_PCIE1_CORE_RST			19
> +#define MT7629_PCIE1_MMIO_RST			20
> +#define MT7629_PCIE1_HRST			21
> +#define MT7629_PCIE1_USER_RST			22
> +#define MT7629_PCIE1_PIPE_RST			23
> +#define MT7629_PCIE0_CORE_RST			27
> +#define MT7629_PCIE0_MMIO_RST			28
> +#define MT7629_PCIE0_HRST			29
> +#define MT7629_PCIE0_USER_RST			30
> +#define MT7629_PCIE0_PIPE_RST			31
> +
> +/* SSUSB Subsystem resets */
> +#define MT7629_SSUSB_PHY_PWR_RST		3
> +#define MT7629_SSUSB_MAC_PWR_RST		4
> +
> +/* ETH Subsystem resets */
> +#define MT7629_ETHSYS_SYS_RST			0
> +#define MT7629_ETHSYS_MCM_RST			2
> +#define MT7629_ETHSYS_HSDMA_RST			5
> +#define MT7629_ETHSYS_FE_RST			6
> +#define MT7629_ETHSYS_ESW_RST			16
> +#define MT7629_ETHSYS_GMAC_RST			23
> +#define MT7629_ETHSYS_EPHY_RST			24
> +#define MT7629_ETHSYS_CRYPTO_RST		29
> +#define MT7629_ETHSYS_PPE_RST			31
> +
> +#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT7629 */
>
Matthias Brugger March 13, 2019, 12:26 p.m. UTC | #2
On 13/03/2019 13:04, Matthias Brugger wrote:
> 
> 
> On 13/03/2019 09:42, ryder.lee@kernel.org wrote:
>> From: Ryder Lee <ryder.lee@mediatek.com>
>>
>> This adds basic support for MT7629 reference board.
>>
>> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
>> ---
>> Changes since v1:
>> -Fix unit-address warnings.
>> -Put all the mmio peripherals under a simple-bus node.
>> -Drop all the 'partitions' nodes in flash node.
>> ---
>>  arch/arm/boot/dts/Makefile                |   1 +
>>  arch/arm/boot/dts/mt7629-rfb.dts          | 203 ++++++++++++++++
>>  arch/arm/boot/dts/mt7629.dtsi             | 370 ++++++++++++++++++++++++++++++
>>  include/dt-bindings/reset/mt7629-resets.h |  71 ++++++
>>  4 files changed, 645 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/mt7629-rfb.dts
>>  create mode 100644 arch/arm/boot/dts/mt7629.dtsi
>>  create mode 100644 include/dt-bindings/reset/mt7629-resets.h
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index bd40148..a5a6d9f 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -1231,6 +1231,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>>  	mt7623a-rfb-nand.dtb \
>>  	mt7623n-rfb-emmc.dtb \
>>  	mt7623n-bananapi-bpi-r2.dtb \
>> +	mt7629-rfb.dtb \
>>  	mt8127-moose.dtb \
>>  	mt8135-evbp1.dtb
>>  dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
>> diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
>> new file mode 100644
>> index 0000000..a47dd7e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/mt7629-rfb.dts
>> @@ -0,0 +1,203 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2019 MediaTek Inc.
>> + * Author: Ryder Lee <ryder.lee@mediatek.com>
>> + */
>> +
>> +/dts-v1/;
>> +#include <dt-bindings/input/input.h>
>> +#include "mt7629.dtsi"
>> +
>> +/ {
>> +	model = "MediaTek MT7629 reference board";
>> +	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	gpio-keys {
>> +		compatible = "gpio-keys";
>> +
>> +		reset {
>> +			label = "factory";
>> +			linux,code = <KEY_RESTART>;
>> +			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
>> +		};
>> +
>> +		wps {
>> +			label = "wps";
>> +			linux,code = <KEY_WPS_BUTTON>;
>> +			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
>> +		};
>> +	};
>> +
>> +	memory@40000000 {
>> +		device_type = "memory";
>> +		reg = <0 0x40000000 0 0x10000000>;
>> +	};
>> +
>> +	reg_3p3v: regulator-3p3v {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "fixed-3.3V";
>> +		regulator-min-microvolt = <3300000>;
>> +		regulator-max-microvolt = <3300000>;
>> +		regulator-boot-on;
>> +		regulator-always-on;
>> +	};
>> +
>> +	reg_5v: regulator-5v {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "fixed-5V";
>> +		regulator-min-microvolt = <5000000>;
>> +		regulator-max-microvolt = <5000000>;
>> +		regulator-boot-on;
>> +		regulator-always-on;
>> +	};
>> +};
>> +
>> +&i2c {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&i2c_pins>;
>> +	status = "okay";
>> +};
>> +
>> +&qspi {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&qspi_pins>;
>> +	status = "okay";
>> +
>> +	flash@0 {
>> +		compatible = "jedec,spi-nor";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +	};
>> +};
>> +
>> +&pio {
>> +	eth_pins: eth-pins {
>> +		mux {
>> +			function = "eth";
>> +			groups = "mdc_mdio";
>> +		};
>> +	};
>> +
>> +	ephy_leds_pins: ephy-leds-pins {
>> +		mux {
>> +			function = "led";
>> +			groups = "gphy_leds_0", "ephy_leds";
>> +		};
>> +	};
>> +
>> +	i2c_pins: i2c-pins {
>> +		mux {
>> +			function = "i2c";
>> +			groups =  "i2c_0";
>> +		};
>> +
>> +		conf {
>> +			pins = "I2C_SDA", "I2C_SCL";
>> +			drive-strength = <4>;
>> +			bias-disable;
>> +		};
>> +	};
>> +
>> +	pcie_pins: pcie-pins {
>> +		mux {
>> +			function = "pcie";
>> +			groups = "pcie_clkreq",
>> +				 "pcie_pereset",
>> +				 "pcie_wake";
>> +		};
>> +	};
>> +
>> +	pwm_pins: pwm-pins {
>> +		mux {
>> +			function = "pwm";
>> +			groups = "pwm_0";
>> +		};
>> +	};
>> +
>> +	/* Serial NAND is shared pin with SPI-NOR */
>> +	serial_nand_pins: serial-nand-pins {
>> +		mux {
>> +			function = "flash";
>> +			groups = "snfi";
>> +		};
>> +	};
>> +
>> +	spi_pins: spi-pins {
>> +		mux {
>> +			function = "spi";
>> +			groups = "spi_0";
>> +		};
>> +	};
>> +
>> +	/* SPI-NOR is shared pin with serial NAND */
>> +	qspi_pins: qspi-pins {
>> +		mux {
>> +			function = "flash";
>> +			groups = "spi_nor";
>> +		};
>> +	};
>> +
>> +	uart0_pins: uart0-pins {
>> +		mux {
>> +			function = "uart";
>> +			groups = "uart0_txd_rxd" ;
>> +		};
>> +	};
>> +
>> +	uart1_pins: uart1-pins {
>> +		mux {
>> +			function = "uart";
>> +			groups = "uart1_0_tx_rx" ;
>> +		};
>> +	};
>> +
>> +	uart2_pins: uart2-pins {
>> +		mux {
>> +			function = "uart";
>> +			groups = "uart2_0_txd_rxd" ;
>> +		};
>> +	};
>> +
>> +	watchdog_pins: watchdog-pins {
>> +		mux {
>> +			function = "watchdog";
>> +			groups = "watchdog";
>> +		};
>> +	};
>> +};
>> +
>> +&spi {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&spi_pins>;
>> +	status = "okay";
>> +};
>> +
>> +&uart0 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&uart0_pins>;
>> +	status = "okay";
>> +};
>> +
>> +&ssusb {
>> +	vusb33-supply = <&reg_3p3v>;
>> +	vbus-supply = <&reg_5v>;
>> +	status = "okay";
>> +};
>> +
>> +&u3phy1 {
>> +	status = "okay";
>> +};
>> +
>> +&watchdog {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&watchdog_pins>;
>> +	status = "okay";
>> +};
>> \ No newline at end of file
>> diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
>> new file mode 100644
>> index 0000000..0197660
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/mt7629.dtsi
>> @@ -0,0 +1,370 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2019 MediaTek Inc.
>> + *
>> + * Author: Ryder Lee <ryder.lee@mediatek.com>
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/mt7629-clk.h>
>> +#include <dt-bindings/power/mt7622-power.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/phy/phy.h>
>> +#include <dt-bindings/reset/mt7629-resets.h>
>> +
>> +/ {
>> +	compatible = "mediatek,mt7629";
>> +	interrupt-parent = <&sysirq>;
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		enable-method = "mediatek,mt6589-smp";
>> +
>> +		cpu0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0x0>;
>> +			clock-frequency = <1250000000>;
>> +			cci-control-port = <&cci_control2>;
>> +		};
>> +
>> +		cpu1: cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0x1>;
>> +			clock-frequency = <1250000000>;
>> +			cci-control-port = <&cci_control2>;
>> +		};
>> +	};
>> +
>> +	pmu {
>> +		compatible = "arm,cortex-a7-pmu";
>> +		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
>> +			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
>> +		interrupt-affinity = <&cpu0>, <&cpu1>;
>> +	};
>> +
>> +	clk20m: oscillator-0 {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <20000000>;
>> +		clock-output-names = "clk20m";
>> +	};
>> +
>> +	clk40m: oscillator-1 {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <40000000>;
>> +		clock-output-names = "clkxtal";
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv7-timer";
>> +		interrupt-parent = <&gic>;
>> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> +		clock-frequency = <20000000>;
>> +		arm,cpu-registers-not-fw-configured;
>> +	};
>> +
>> +	soc {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		compatible = "simple-bus";
>> +		ranges;
>> +
>> +		infracfg: syscon@10000000 {
>> +			compatible = "mediatek,mt7629-infracfg", "syscon";
>> +			reg = <0 0x10000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		pericfg: syscon@10002000 {
>> +			compatible = "mediatek,mt7629-pericfg", "syscon";
>> +			reg = <0 0x10002000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		scpsys: scpsys@10006000 {
>> +			compatible = "mediatek,mt7629-scpsys",
>> +				     "mediatek,mt7622-scpsys";
> 
> Binding description is missing.
> 
>> +			#power-domain-cells = <1>;
>> +			reg = <0 0x10006000 0 0x1000>;
>> +			clocks = <&topckgen CLK_TOP_HIF_SEL>;
>> +			clock-names = "hif_sel";
>> +			assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
>> +			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
>> +			infracfg = <&infracfg>;
>> +		};
>> +
>> +		timer: timer@10009000 {
>> +			compatible = "mediatek,mt7629-timer",
>> +				     "mediatek,mt6765-timer";
>> +			reg = <0 0x10009000 0 0x60>;
>> +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&clk20m>;
>> +			clock-names = "clk20m";
>> +		};
>> +
>> +		sysirq: interrupt-controller@10200a80 {
>> +			compatible = "mediatek,mt7629-sysirq",
>> +				     "mediatek,mt6577-sysirq";
> 
> Same here.
> 
>> +			reg = <0 0x10200a80 0 0x20>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <3>;
>> +			interrupt-parent = <&gic>;
>> +		};
>> +
>> +		apmixedsys: syscon@10209000 {
>> +			compatible = "mediatek,mt7629-apmixedsys", "syscon";
>> +			reg = <0 0x10209000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		rng: rng@1020f000 {
>> +			compatible = "mediatek,mt7629-rng",
>> +				     "mediatek,mt7623-rng";
>> +			reg = <0 0x1020f000 0 0x100>;
>> +			clocks = <&infracfg CLK_INFRA_TRNG_PD>;
>> +			clock-names = "rng";
>> +		};
>> +
>> +		topckgen: syscon@10210000 {
>> +			compatible = "mediatek,mt7629-topckgen", "syscon";
>> +			reg = <0 0x10210000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		watchdog: watchdog@10212000 {
>> +			compatible = "mediatek,mt7629-wdt",
>> +				     "mediatek,mt6589-wdt";
>> +			reg = <0 0x10212000 0 0x100>;
>> +		};
>> +
>> +		pio: pinctrl@10217000 {
>> +			compatible = "mediatek,mt7629-pinctrl";
>> +			reg = <0 0x10217000 0 0x8000>,
>> +			      <0 0x10005000 0 0x1000>;
>> +			reg-names = "base", "eint";
>> +			gpio-controller;
>> +			gpio-ranges = <&pio 0 0 79>;
>> +			#gpio-cells = <2>;
>> +			#interrupt-cells = <2>;
>> +			interrupt-controller;
>> +			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-parent = <&gic>;
>> +		};
>> +
>> +		gic: interrupt-controller@10300000 {
>> +			compatible = "arm,gic-400";
>> +			interrupt-controller;
>> +			#interrupt-cells = <3>;
>> +			interrupt-parent = <&gic>;
>> +			reg = <0 0x10310000 0 0x1000>,
>> +			      <0 0x10320000 0 0x1000>,
>> +			      <0 0x10340000 0 0x2000>,
>> +			      <0 0x10360000 0 0x2000>;
>> +		};
>> +
>> +		cci: cci@10390000 {
>> +			compatible = "arm,cci-400";
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			reg = <0 0x10390000 0 0x1000>;
>> +			ranges = <0 0 0x10390000 0x10000>;
>> +
>> +			cci_control0: slave-if@1000 {
>> +				compatible = "arm,cci-400-ctrl-if";
>> +				interface-type = "ace-lite";
>> +				reg = <0x1000 0x1000>;
>> +			};
>> +
>> +			cci_control1: slave-if@4000 {
>> +				compatible = "arm,cci-400-ctrl-if";
>> +				interface-type = "ace";
>> +				reg = <0x4000 0x1000>;
>> +			};
>> +
>> +			cci_control2: slave-if@5000 {
>> +				compatible = "arm,cci-400-ctrl-if";
>> +				interface-type = "ace";
>> +				reg = <0x5000 0x1000>;
>> +			};
>> +
>> +			pmu@9000 {
>> +				compatible = "arm,cci-400-pmu,r1";
>> +				reg = <0x9000 0x5000>;
>> +				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
>> +			};
>> +		};
>> +
>> +		uart0: serial@11002000 {
>> +			compatible = "mediatek,mt7629-uart",
>> +				     "mediatek,mt6577-uart";
> 
> Same here.
> 
> Please provide the corresponding patches (one for each component) in v2.
> Other then that, patch looks good to me.
> 

submitted here:
https://patchwork.kernel.org/patch/10817049/

I'll take both of them. Sorry for the confusion.

Matthias

> Regards,
> Matthias
> 
>> +			reg = <0 0x11002000 0 0x400>;
>> +			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
>> +				 <&pericfg CLK_PERI_UART0_PD>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart1: serial@11003000 {
>> +			compatible = "mediatek,mt7629-uart",
>> +				     "mediatek,mt6577-uart";
>> +			reg = <0 0x11003000 0 0x400>;
>> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
>> +				 <&pericfg CLK_PERI_UART1_PD>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart2: serial@11004000 {
>> +			compatible = "mediatek,mt7629-uart",
>> +				     "mediatek,mt6577-uart";
>> +			reg = <0 0x11004000 0 0x400>;
>> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
>> +				 <&pericfg CLK_PERI_UART2_PD>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		i2c: i2c@11007000 {
>> +			compatible = "mediatek,mt7629-i2c",
>> +				     "mediatek,mt2712-i2c";
>> +			reg = <0 0x11007000 0 0x90>,
>> +				  <0 0x11000100 0 0x80>;
>> +			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
>> +			clock-div = <4>;
>> +			clocks = <&pericfg CLK_PERI_I2C0_PD>,
>> +				 <&pericfg CLK_PERI_AP_DMA_PD>;
>> +			clock-names = "main", "dma";
>> +			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
>> +			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			status = "disabled";
>> +		};
>> +
>> +		spi: spi@1100a000 {
>> +			compatible = "mediatek,mt7629-spi",
>> +				     "mediatek,mt7622-spi";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0 0x1100a000 0 0x100>;
>> +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
>> +				 <&topckgen CLK_TOP_SPI0_SEL>,
>> +				 <&pericfg CLK_PERI_SPI0_PD>;
>> +			clock-names = "parent-clk", "sel-clk", "spi-clk";
>> +			status = "disabled";
>> +		};
>> +
>> +		qspi: spi@11014000 {
>> +			compatible = "mediatek,mt7629-nor",
>> +				     "mediatek,mt8173-nor";
>> +			reg = <0 0x11014000 0 0xe0>;
>> +			clocks = <&pericfg CLK_PERI_FLASH_PD>,
>> +				 <&topckgen CLK_TOP_FLASH_SEL>;
>> +			clock-names = "spi", "sf";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			status = "disabled";
>> +		};
>> +
>> +		ssusbsys: syscon@1a000000 {
>> +			compatible = "mediatek,mt7629-ssusbsys", "syscon";
>> +			reg = <0 0x1a000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +		};
>> +
>> +		ssusb: usb@1a0c0000 {
>> +			compatible = "mediatek,mt7629-xhci",
>> +				     "mediatek,mtk-xhci";
>> +			reg = <0 0x1a0c0000 0 0x01000>,
>> +			      <0 0x1a0c3e00 0 0x0100>;
>> +			reg-names = "mac", "ippc";
>> +			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
>> +				 <&ssusbsys CLK_SSUSB_REF_EN>,
>> +				 <&ssusbsys CLK_SSUSB_MCU_EN>,
>> +				 <&ssusbsys CLK_SSUSB_DMA_EN>;
>> +			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
>> +			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
>> +					  <&topckgen CLK_TOP_SATA_SEL>,
>> +					  <&topckgen CLK_TOP_HIF_SEL>;
>> +			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
>> +						 <&topckgen CLK_TOP_UNIVPLL2_D4>,
>> +						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
>> +			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
>> +			phys = <&u2port0 PHY_TYPE_USB2>,
>> +			       <&u3port0 PHY_TYPE_USB3>;
>> +			status = "disabled";
>> +		};
>> +
>> +		u3phy1: usb-phy@1a0c4000 {
>> +			compatible = "mediatek,generic-tphy-v1";
>> +			reg = <0 0x1a0c4000 0 0x300>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			u2port0: usb-phy@1a0c4300 {
>> +				reg = <0 0x1a0c4300 0 0x100>;
>> +				clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
>> +				clock-names = "ref";
>> +				#phy-cells = <1>;
>> +				status = "okay";
>> +			};
>> +
>> +			u3port0: usb-phy@1a1c4900 {
>> +				reg = <0 0x1a1c4900 0 0x700>;
>> +				clocks = <&clk20m>;
>> +				clock-names = "ref";
>> +				#phy-cells = <1>;
>> +				status = "okay";
>> +			};
>> +		};
>> +
>> +		pciesys: syscon@1a100800 {
>> +			compatible = "mediatek,mt7629-pciesys", "syscon";
>> +			reg = <0 0x1a100800 0 0x1000>;
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +		};
>> +
>> +		ethsys: syscon@1b000000 {
>> +			compatible = "mediatek,mt7629-ethsys", "syscon";
>> +			reg = <0 0x1b000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +		};
>> +
>> +		sgmiisys0: syscon@1b128000 {
>> +			compatible = "mediatek,mt7629-sgmiisys", "syscon";
>> +			reg = <0 0x1b128000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		sgmiisys1: syscon@1b130000 {
>> +			compatible = "mediatek,mt7629-sgmiisys", "syscon";
>> +			reg = <0 0x1b130000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +	};
>> +};
>> diff --git a/include/dt-bindings/reset/mt7629-resets.h b/include/dt-bindings/reset/mt7629-resets.h
>> new file mode 100644
>> index 0000000..6bb8573
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/mt7629-resets.h
>> @@ -0,0 +1,71 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (C) 2019 MediaTek Inc.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7629
>> +#define _DT_BINDINGS_RESET_CONTROLLER_MT7629
>> +
>> +/* INFRACFG resets */
>> +#define MT7629_INFRA_EMI_MPU_RST		0
>> +#define MT7629_INFRA_UART5_RST			2
>> +#define MT7629_INFRA_CIRQ_EINT_RST		3
>> +#define MT7629_INFRA_APXGPT_RST			4
>> +#define MT7629_INFRA_SCPSYS_RST			5
>> +#define MT7629_INFRA_KP_RST			6
>> +#define MT7629_INFRA_SPI1_RST			7
>> +#define MT7629_INFRA_SPI4_RST			8
>> +#define MT7629_INFRA_SYSTIMER_RST		9
>> +#define MT7629_INFRA_IRRX_RST			10
>> +#define MT7629_INFRA_AO_BUS_RST			16
>> +#define MT7629_INFRA_EMI_RST			32
>> +#define MT7629_INFRA_APMIXED_RST		35
>> +#define MT7629_INFRA_MIPI_RST			36
>> +#define MT7629_INFRA_TRNG_RST			37
>> +#define MT7629_INFRA_SYSCIRQ_RST		38
>> +#define MT7629_INFRA_MIPI_CSI_RST		39
>> +#define MT7629_INFRA_GCE_FAXI_RST		40
>> +#define MT7629_INFRA_I2C_SRAM_RST		41
>> +#define MT7629_INFRA_IOMMU_RST			47
>> +
>> +/* PERICFG resets */
>> +#define MT7629_PERI_UART0_SW_RST		0
>> +#define MT7629_PERI_UART1_SW_RST		1
>> +#define MT7629_PERI_UART2_SW_RST		2
>> +#define MT7629_PERI_BTIF_SW_RST			6
>> +#define MT7629_PERI_PWN_SW_RST			8
>> +#define MT7629_PERI_DMA_SW_RST			11
>> +#define MT7629_PERI_NFI_SW_RST			14
>> +#define MT7629_PERI_I2C0_SW_RST			22
>> +#define MT7629_PERI_SPI0_SW_RST			33
>> +#define MT7629_PERI_SPI1_SW_RST			34
>> +#define MT7629_PERI_FLASHIF_SW_RST		36
>> +
>> +/* PCIe Subsystem resets */
>> +#define MT7629_PCIE1_CORE_RST			19
>> +#define MT7629_PCIE1_MMIO_RST			20
>> +#define MT7629_PCIE1_HRST			21
>> +#define MT7629_PCIE1_USER_RST			22
>> +#define MT7629_PCIE1_PIPE_RST			23
>> +#define MT7629_PCIE0_CORE_RST			27
>> +#define MT7629_PCIE0_MMIO_RST			28
>> +#define MT7629_PCIE0_HRST			29
>> +#define MT7629_PCIE0_USER_RST			30
>> +#define MT7629_PCIE0_PIPE_RST			31
>> +
>> +/* SSUSB Subsystem resets */
>> +#define MT7629_SSUSB_PHY_PWR_RST		3
>> +#define MT7629_SSUSB_MAC_PWR_RST		4
>> +
>> +/* ETH Subsystem resets */
>> +#define MT7629_ETHSYS_SYS_RST			0
>> +#define MT7629_ETHSYS_MCM_RST			2
>> +#define MT7629_ETHSYS_HSDMA_RST			5
>> +#define MT7629_ETHSYS_FE_RST			6
>> +#define MT7629_ETHSYS_ESW_RST			16
>> +#define MT7629_ETHSYS_GMAC_RST			23
>> +#define MT7629_ETHSYS_EPHY_RST			24
>> +#define MT7629_ETHSYS_CRYPTO_RST		29
>> +#define MT7629_ETHSYS_PPE_RST			31
>> +
>> +#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT7629 */
>>
Rob Herring (Arm) March 28, 2019, 3:06 p.m. UTC | #3
On Wed, Mar 13, 2019 at 04:42:15PM +0800, ryder.lee@kernel.org wrote:
> From: Ryder Lee <ryder.lee@mediatek.com>
> 
> This adds basic support for MT7629 reference board.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> Changes since v1:
> -Fix unit-address warnings.
> -Put all the mmio peripherals under a simple-bus node.
> -Drop all the 'partitions' nodes in flash node.
> ---
>  arch/arm/boot/dts/Makefile                |   1 +
>  arch/arm/boot/dts/mt7629-rfb.dts          | 203 ++++++++++++++++
>  arch/arm/boot/dts/mt7629.dtsi             | 370 ++++++++++++++++++++++++++++++
>  include/dt-bindings/reset/mt7629-resets.h |  71 ++++++
>  4 files changed, 645 insertions(+)
>  create mode 100644 arch/arm/boot/dts/mt7629-rfb.dts
>  create mode 100644 arch/arm/boot/dts/mt7629.dtsi
>  create mode 100644 include/dt-bindings/reset/mt7629-resets.h
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index bd40148..a5a6d9f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1231,6 +1231,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
>  	mt7623a-rfb-nand.dtb \
>  	mt7623n-rfb-emmc.dtb \
>  	mt7623n-bananapi-bpi-r2.dtb \
> +	mt7629-rfb.dtb \
>  	mt8127-moose.dtb \
>  	mt8135-evbp1.dtb
>  dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
> diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
> new file mode 100644
> index 0000000..a47dd7e
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7629-rfb.dts
> @@ -0,0 +1,203 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Ryder Lee <ryder.lee@mediatek.com>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "mt7629.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7629 reference board";
> +	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		reset {
> +			label = "factory";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		wps {
> +			label = "wps";
> +			linux,code = <KEY_WPS_BUTTON>;
> +			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x10000000>;
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	reg_5v: regulator-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +};
> +
> +&i2c {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c_pins>;
> +	status = "okay";
> +};
> +
> +&qspi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&qspi_pins>;
> +	status = "okay";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> +
> +&pio {
> +	eth_pins: eth-pins {
> +		mux {
> +			function = "eth";
> +			groups = "mdc_mdio";
> +		};
> +	};
> +
> +	ephy_leds_pins: ephy-leds-pins {
> +		mux {
> +			function = "led";
> +			groups = "gphy_leds_0", "ephy_leds";
> +		};
> +	};
> +
> +	i2c_pins: i2c-pins {
> +		mux {
> +			function = "i2c";
> +			groups =  "i2c_0";
> +		};
> +
> +		conf {
> +			pins = "I2C_SDA", "I2C_SCL";
> +			drive-strength = <4>;
> +			bias-disable;
> +		};
> +	};
> +
> +	pcie_pins: pcie-pins {
> +		mux {
> +			function = "pcie";
> +			groups = "pcie_clkreq",
> +				 "pcie_pereset",
> +				 "pcie_wake";
> +		};
> +	};
> +
> +	pwm_pins: pwm-pins {
> +		mux {
> +			function = "pwm";
> +			groups = "pwm_0";
> +		};
> +	};
> +
> +	/* Serial NAND is shared pin with SPI-NOR */
> +	serial_nand_pins: serial-nand-pins {
> +		mux {
> +			function = "flash";
> +			groups = "snfi";
> +		};
> +	};
> +
> +	spi_pins: spi-pins {
> +		mux {
> +			function = "spi";
> +			groups = "spi_0";
> +		};
> +	};
> +
> +	/* SPI-NOR is shared pin with serial NAND */
> +	qspi_pins: qspi-pins {
> +		mux {
> +			function = "flash";
> +			groups = "spi_nor";
> +		};
> +	};
> +
> +	uart0_pins: uart0-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart0_txd_rxd" ;
> +		};
> +	};
> +
> +	uart1_pins: uart1-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart1_0_tx_rx" ;
> +		};
> +	};
> +
> +	uart2_pins: uart2-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart2_0_txd_rxd" ;
> +		};
> +	};
> +
> +	watchdog_pins: watchdog-pins {
> +		mux {
> +			function = "watchdog";
> +			groups = "watchdog";
> +		};
> +	};
> +};
> +
> +&spi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi_pins>;
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins>;
> +	status = "okay";
> +};
> +
> +&ssusb {
> +	vusb33-supply = <&reg_3p3v>;
> +	vbus-supply = <&reg_5v>;
> +	status = "okay";
> +};
> +
> +&u3phy1 {
> +	status = "okay";
> +};
> +
> +&watchdog {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&watchdog_pins>;
> +	status = "okay";
> +};
> \ No newline at end of file

Fix this.

> diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
> new file mode 100644
> index 0000000..0197660
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7629.dtsi
> @@ -0,0 +1,370 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + *
> + * Author: Ryder Lee <ryder.lee@mediatek.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/mt7629-clk.h>
> +#include <dt-bindings/power/mt7622-power.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/reset/mt7629-resets.h>
> +
> +/ {
> +	compatible = "mediatek,mt7629";
> +	interrupt-parent = <&sysirq>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		enable-method = "mediatek,mt6589-smp";
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x0>;
> +			clock-frequency = <1250000000>;
> +			cci-control-port = <&cci_control2>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x1>;
> +			clock-frequency = <1250000000>;
> +			cci-control-port = <&cci_control2>;
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,cortex-a7-pmu";
> +		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-affinity = <&cpu0>, <&cpu1>;
> +	};
> +
> +	clk20m: oscillator-0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <20000000>;
> +		clock-output-names = "clk20m";
> +	};
> +
> +	clk40m: oscillator-1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <40000000>;
> +		clock-output-names = "clkxtal";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv7-timer";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		clock-frequency = <20000000>;
> +		arm,cpu-registers-not-fw-configured;

New systems should not have this. Fix the firmware.

> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;

Do you really have any addresses and/or sizes greater than 4GB within 
this node?

> +		compatible = "simple-bus";
> +		ranges;
> +
> +		infracfg: syscon@10000000 {
> +			compatible = "mediatek,mt7629-infracfg", "syscon";
> +			reg = <0 0x10000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		pericfg: syscon@10002000 {
> +			compatible = "mediatek,mt7629-pericfg", "syscon";
> +			reg = <0 0x10002000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		scpsys: scpsys@10006000 {
> +			compatible = "mediatek,mt7629-scpsys",
> +				     "mediatek,mt7622-scpsys";
> +			#power-domain-cells = <1>;
> +			reg = <0 0x10006000 0 0x1000>;
> +			clocks = <&topckgen CLK_TOP_HIF_SEL>;
> +			clock-names = "hif_sel";
> +			assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
> +			infracfg = <&infracfg>;
> +		};
> +
> +		timer: timer@10009000 {
> +			compatible = "mediatek,mt7629-timer",
> +				     "mediatek,mt6765-timer";
> +			reg = <0 0x10009000 0 0x60>;
> +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk20m>;
> +			clock-names = "clk20m";
> +		};
> +
> +		sysirq: interrupt-controller@10200a80 {
> +			compatible = "mediatek,mt7629-sysirq",
> +				     "mediatek,mt6577-sysirq";
> +			reg = <0 0x10200a80 0 0x20>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +		};
> +
> +		apmixedsys: syscon@10209000 {
> +			compatible = "mediatek,mt7629-apmixedsys", "syscon";
> +			reg = <0 0x10209000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		rng: rng@1020f000 {
> +			compatible = "mediatek,mt7629-rng",
> +				     "mediatek,mt7623-rng";
> +			reg = <0 0x1020f000 0 0x100>;
> +			clocks = <&infracfg CLK_INFRA_TRNG_PD>;
> +			clock-names = "rng";
> +		};
> +
> +		topckgen: syscon@10210000 {
> +			compatible = "mediatek,mt7629-topckgen", "syscon";
> +			reg = <0 0x10210000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		watchdog: watchdog@10212000 {
> +			compatible = "mediatek,mt7629-wdt",
> +				     "mediatek,mt6589-wdt";
> +			reg = <0 0x10212000 0 0x100>;
> +		};
> +
> +		pio: pinctrl@10217000 {
> +			compatible = "mediatek,mt7629-pinctrl";
> +			reg = <0 0x10217000 0 0x8000>,
> +			      <0 0x10005000 0 0x1000>;
> +			reg-names = "base", "eint";
> +			gpio-controller;
> +			gpio-ranges = <&pio 0 0 79>;
> +			#gpio-cells = <2>;
> +			#interrupt-cells = <2>;
> +			interrupt-controller;
> +			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +		};
> +
> +		gic: interrupt-controller@10300000 {
> +			compatible = "arm,gic-400";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			reg = <0 0x10310000 0 0x1000>,
> +			      <0 0x10320000 0 0x1000>,
> +			      <0 0x10340000 0 0x2000>,
> +			      <0 0x10360000 0 0x2000>;
> +		};
> +
> +		cci: cci@10390000 {
> +			compatible = "arm,cci-400";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			reg = <0 0x10390000 0 0x1000>;
> +			ranges = <0 0 0x10390000 0x10000>;
> +
> +			cci_control0: slave-if@1000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace-lite";
> +				reg = <0x1000 0x1000>;
> +			};
> +
> +			cci_control1: slave-if@4000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace";
> +				reg = <0x4000 0x1000>;
> +			};
> +
> +			cci_control2: slave-if@5000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace";
> +				reg = <0x5000 0x1000>;
> +			};
> +
> +			pmu@9000 {
> +				compatible = "arm,cci-400-pmu,r1";
> +				reg = <0x9000 0x5000>;
> +				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		uart0: serial@11002000 {
> +			compatible = "mediatek,mt7629-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11002000 0 0x400>;
> +			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
> +				 <&pericfg CLK_PERI_UART0_PD>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@11003000 {
> +			compatible = "mediatek,mt7629-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11003000 0 0x400>;
> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
> +				 <&pericfg CLK_PERI_UART1_PD>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@11004000 {
> +			compatible = "mediatek,mt7629-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11004000 0 0x400>;
> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_UART_SEL>,
> +				 <&pericfg CLK_PERI_UART2_PD>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		i2c: i2c@11007000 {
> +			compatible = "mediatek,mt7629-i2c",
> +				     "mediatek,mt2712-i2c";
> +			reg = <0 0x11007000 0 0x90>,
> +				  <0 0x11000100 0 0x80>;
> +			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
> +			clock-div = <4>;
> +			clocks = <&pericfg CLK_PERI_I2C0_PD>,
> +				 <&pericfg CLK_PERI_AP_DMA_PD>;
> +			clock-names = "main", "dma";
> +			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		spi: spi@1100a000 {
> +			compatible = "mediatek,mt7629-spi",
> +				     "mediatek,mt7622-spi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0 0x1100a000 0 0x100>;
> +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
> +				 <&topckgen CLK_TOP_SPI0_SEL>,
> +				 <&pericfg CLK_PERI_SPI0_PD>;
> +			clock-names = "parent-clk", "sel-clk", "spi-clk";
> +			status = "disabled";
> +		};
> +
> +		qspi: spi@11014000 {
> +			compatible = "mediatek,mt7629-nor",
> +				     "mediatek,mt8173-nor";
> +			reg = <0 0x11014000 0 0xe0>;
> +			clocks = <&pericfg CLK_PERI_FLASH_PD>,
> +				 <&topckgen CLK_TOP_FLASH_SEL>;
> +			clock-names = "spi", "sf";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		ssusbsys: syscon@1a000000 {
> +			compatible = "mediatek,mt7629-ssusbsys", "syscon";
> +			reg = <0 0x1a000000 0 0x1000>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		ssusb: usb@1a0c0000 {
> +			compatible = "mediatek,mt7629-xhci",
> +				     "mediatek,mtk-xhci";
> +			reg = <0 0x1a0c0000 0 0x01000>,
> +			      <0 0x1a0c3e00 0 0x0100>;
> +			reg-names = "mac", "ippc";
> +			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
> +				 <&ssusbsys CLK_SSUSB_REF_EN>,
> +				 <&ssusbsys CLK_SSUSB_MCU_EN>,
> +				 <&ssusbsys CLK_SSUSB_DMA_EN>;
> +			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
> +			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
> +					  <&topckgen CLK_TOP_SATA_SEL>,
> +					  <&topckgen CLK_TOP_HIF_SEL>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
> +						 <&topckgen CLK_TOP_UNIVPLL2_D4>,
> +						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
> +			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
> +			phys = <&u2port0 PHY_TYPE_USB2>,
> +			       <&u3port0 PHY_TYPE_USB3>;
> +			status = "disabled";
> +		};
> +
> +		u3phy1: usb-phy@1a0c4000 {
> +			compatible = "mediatek,generic-tphy-v1";
> +			reg = <0 0x1a0c4000 0 0x300>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;

Only need 1 cell for these.

> +			ranges;
> +			status = "disabled";
> +
> +			u2port0: usb-phy@1a0c4300 {
> +				reg = <0 0x1a0c4300 0 0x100>;

Use a non-empty ranges and just provide the offset.

> +				clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +				status = "okay";
> +			};
> +
> +			u3port0: usb-phy@1a1c4900 {
> +				reg = <0 0x1a1c4900 0 0x700>;
> +				clocks = <&clk20m>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +				status = "okay";
> +			};
> +		};
> +
> +		pciesys: syscon@1a100800 {
> +			compatible = "mediatek,mt7629-pciesys", "syscon";
> +			reg = <0 0x1a100800 0 0x1000>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		ethsys: syscon@1b000000 {
> +			compatible = "mediatek,mt7629-ethsys", "syscon";
> +			reg = <0 0x1b000000 0 0x1000>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		sgmiisys0: syscon@1b128000 {
> +			compatible = "mediatek,mt7629-sgmiisys", "syscon";
> +			reg = <0 0x1b128000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		sgmiisys1: syscon@1b130000 {
> +			compatible = "mediatek,mt7629-sgmiisys", "syscon";
> +			reg = <0 0x1b130000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +	};
> +};
> diff --git a/include/dt-bindings/reset/mt7629-resets.h b/include/dt-bindings/reset/mt7629-resets.h
> new file mode 100644
> index 0000000..6bb8573
> --- /dev/null
> +++ b/include/dt-bindings/reset/mt7629-resets.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7629
> +#define _DT_BINDINGS_RESET_CONTROLLER_MT7629
> +
> +/* INFRACFG resets */
> +#define MT7629_INFRA_EMI_MPU_RST		0
> +#define MT7629_INFRA_UART5_RST			2
> +#define MT7629_INFRA_CIRQ_EINT_RST		3
> +#define MT7629_INFRA_APXGPT_RST			4
> +#define MT7629_INFRA_SCPSYS_RST			5
> +#define MT7629_INFRA_KP_RST			6
> +#define MT7629_INFRA_SPI1_RST			7
> +#define MT7629_INFRA_SPI4_RST			8
> +#define MT7629_INFRA_SYSTIMER_RST		9
> +#define MT7629_INFRA_IRRX_RST			10
> +#define MT7629_INFRA_AO_BUS_RST			16
> +#define MT7629_INFRA_EMI_RST			32
> +#define MT7629_INFRA_APMIXED_RST		35
> +#define MT7629_INFRA_MIPI_RST			36
> +#define MT7629_INFRA_TRNG_RST			37
> +#define MT7629_INFRA_SYSCIRQ_RST		38
> +#define MT7629_INFRA_MIPI_CSI_RST		39
> +#define MT7629_INFRA_GCE_FAXI_RST		40
> +#define MT7629_INFRA_I2C_SRAM_RST		41
> +#define MT7629_INFRA_IOMMU_RST			47
> +
> +/* PERICFG resets */
> +#define MT7629_PERI_UART0_SW_RST		0
> +#define MT7629_PERI_UART1_SW_RST		1
> +#define MT7629_PERI_UART2_SW_RST		2
> +#define MT7629_PERI_BTIF_SW_RST			6
> +#define MT7629_PERI_PWN_SW_RST			8
> +#define MT7629_PERI_DMA_SW_RST			11
> +#define MT7629_PERI_NFI_SW_RST			14
> +#define MT7629_PERI_I2C0_SW_RST			22
> +#define MT7629_PERI_SPI0_SW_RST			33
> +#define MT7629_PERI_SPI1_SW_RST			34
> +#define MT7629_PERI_FLASHIF_SW_RST		36
> +
> +/* PCIe Subsystem resets */
> +#define MT7629_PCIE1_CORE_RST			19
> +#define MT7629_PCIE1_MMIO_RST			20
> +#define MT7629_PCIE1_HRST			21
> +#define MT7629_PCIE1_USER_RST			22
> +#define MT7629_PCIE1_PIPE_RST			23
> +#define MT7629_PCIE0_CORE_RST			27
> +#define MT7629_PCIE0_MMIO_RST			28
> +#define MT7629_PCIE0_HRST			29
> +#define MT7629_PCIE0_USER_RST			30
> +#define MT7629_PCIE0_PIPE_RST			31
> +
> +/* SSUSB Subsystem resets */
> +#define MT7629_SSUSB_PHY_PWR_RST		3
> +#define MT7629_SSUSB_MAC_PWR_RST		4
> +
> +/* ETH Subsystem resets */
> +#define MT7629_ETHSYS_SYS_RST			0
> +#define MT7629_ETHSYS_MCM_RST			2
> +#define MT7629_ETHSYS_HSDMA_RST			5
> +#define MT7629_ETHSYS_FE_RST			6
> +#define MT7629_ETHSYS_ESW_RST			16
> +#define MT7629_ETHSYS_GMAC_RST			23
> +#define MT7629_ETHSYS_EPHY_RST			24
> +#define MT7629_ETHSYS_CRYPTO_RST		29
> +#define MT7629_ETHSYS_PPE_RST			31
> +
> +#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT7629 */
> -- 
> 1.9.1
>
Kevin Hilman June 28, 2019, 11:32 p.m. UTC | #4
<ryder.lee@kernel.org> writes:

> From: Ryder Lee <ryder.lee@mediatek.com>
>
> This adds basic support for MT7629 reference board.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>

Just noticing this is not upstream yet.

I did a basic boot test to ramdisk on the mt7629-rfb board donated for
kernelCI (thanks MediaTek!) and it boots just fine.

Tested-by: Kevin Hilman <khilman@baylibre.com>

Kevin
Ryder Lee June 29, 2019, 3:58 p.m. UTC | #5
On Fri, 2019-06-28 at 16:32 -0700, Kevin Hilman wrote:
> <ryder.lee@kernel.org> writes:
> 
> > From: Ryder Lee <ryder.lee@mediatek.com>
> >
> > This adds basic support for MT7629 reference board.
> >
> > Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> 
> Just noticing this is not upstream yet.
> 
> I did a basic boot test to ramdisk on the mt7629-rfb board donated for
> kernelCI (thanks MediaTek!) and it boots just fine.
> 
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> 
> Kevin

Thanks. I'll post v3 with some fixups soon.

Ryder
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bd40148..a5a6d9f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1231,6 +1231,7 @@  dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt7623a-rfb-nand.dtb \
 	mt7623n-rfb-emmc.dtb \
 	mt7623n-bananapi-bpi-r2.dtb \
+	mt7629-rfb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
new file mode 100644
index 0000000..a47dd7e
--- /dev/null
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -0,0 +1,203 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7629.dtsi"
+
+/ {
+	model = "MediaTek MT7629 reference board";
+	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "factory";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x10000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&pio {
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio";
+		};
+	};
+
+	ephy_leds_pins: ephy-leds-pins {
+		mux {
+			function = "led";
+			groups = "gphy_leds_0", "ephy_leds";
+		};
+	};
+
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups =  "i2c_0";
+		};
+
+		conf {
+			pins = "I2C_SDA", "I2C_SCL";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clkreq",
+				 "pcie_pereset",
+				 "pcie_wake";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_0";
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spi_pins: spi-pins {
+		mux {
+			function = "spi";
+			groups = "spi_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	qspi_pins: qspi-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_txd_rxd" ;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_txd_rxd" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
new file mode 100644
index 0000000..0197660
--- /dev/null
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -0,0 +1,370 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ *
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7629-clk.h>
+#include <dt-bindings/power/mt7622-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt7629-resets.h>
+
+/ {
+	compatible = "mediatek,mt7629";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1250000000>;
+			cci-control-port = <&cci_control2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1250000000>;
+			cci-control-port = <&cci_control2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	clk20m: oscillator-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "clk20m";
+	};
+
+	clk40m: oscillator-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <20000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		infracfg: syscon@10000000 {
+			compatible = "mediatek,mt7629-infracfg", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10002000 {
+			compatible = "mediatek,mt7629-pericfg", "syscon";
+			reg = <0 0x10002000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		scpsys: scpsys@10006000 {
+			compatible = "mediatek,mt7629-scpsys",
+				     "mediatek,mt7622-scpsys";
+			#power-domain-cells = <1>;
+			reg = <0 0x10006000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_HIF_SEL>;
+			clock-names = "hif_sel";
+			assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			infracfg = <&infracfg>;
+		};
+
+		timer: timer@10009000 {
+			compatible = "mediatek,mt7629-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10009000 0 0x60>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk20m>;
+			clock-names = "clk20m";
+		};
+
+		sysirq: interrupt-controller@10200a80 {
+			compatible = "mediatek,mt7629-sysirq",
+				     "mediatek,mt6577-sysirq";
+			reg = <0 0x10200a80 0 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		apmixedsys: syscon@10209000 {
+			compatible = "mediatek,mt7629-apmixedsys", "syscon";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt7629-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_PD>;
+			clock-names = "rng";
+		};
+
+		topckgen: syscon@10210000 {
+			compatible = "mediatek,mt7629-topckgen", "syscon";
+			reg = <0 0x10210000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@10212000 {
+			compatible = "mediatek,mt7629-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10212000 0 0x100>;
+		};
+
+		pio: pinctrl@10217000 {
+			compatible = "mediatek,mt7629-pinctrl";
+			reg = <0 0x10217000 0 0x8000>,
+			      <0 0x10005000 0 0x1000>;
+			reg-names = "base", "eint";
+			gpio-controller;
+			gpio-ranges = <&pio 0 0 79>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		gic: interrupt-controller@10300000 {
+			compatible = "arm,gic-400";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10310000 0 0x1000>,
+			      <0 0x10320000 0 0x1000>,
+			      <0 0x10340000 0 0x2000>,
+			      <0 0x10360000 0 0x2000>;
+		};
+
+		cci: cci@10390000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x10390000 0 0x1000>;
+			ranges = <0 0 0x10390000 0x10000>;
+
+			cci_control0: slave-if@1000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace-lite";
+				reg = <0x1000 0x1000>;
+			};
+
+			cci_control1: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control2: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART0_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART1_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART2_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c: i2c@11007000 {
+			compatible = "mediatek,mt7629-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x11007000 0 0x90>,
+				  <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <4>;
+			clocks = <&pericfg CLK_PERI_I2C0_PD>,
+				 <&pericfg CLK_PERI_AP_DMA_PD>;
+			clock-names = "main", "dma";
+			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt7629-spi",
+				     "mediatek,mt7622-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+				 <&topckgen CLK_TOP_SPI0_SEL>,
+				 <&pericfg CLK_PERI_SPI0_PD>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		qspi: spi@11014000 {
+			compatible = "mediatek,mt7629-nor",
+				     "mediatek,mt8173-nor";
+			reg = <0 0x11014000 0 0xe0>;
+			clocks = <&pericfg CLK_PERI_FLASH_PD>,
+				 <&topckgen CLK_TOP_FLASH_SEL>;
+			clock-names = "spi", "sf";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusbsys: syscon@1a000000 {
+			compatible = "mediatek,mt7629-ssusbsys", "syscon";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ssusb: usb@1a0c0000 {
+			compatible = "mediatek,mt7629-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x1a0c0000 0 0x01000>,
+			      <0 0x1a0c3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+				 <&ssusbsys CLK_SSUSB_REF_EN>,
+				 <&ssusbsys CLK_SSUSB_MCU_EN>,
+				 <&ssusbsys CLK_SSUSB_DMA_EN>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
+					  <&topckgen CLK_TOP_SATA_SEL>,
+					  <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
+						 <&topckgen CLK_TOP_UNIVPLL2_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		u3phy1: usb-phy@1a0c4000 {
+			compatible = "mediatek,generic-tphy-v1";
+			reg = <0 0x1a0c4000 0 0x300>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			u2port0: usb-phy@1a0c4300 {
+				reg = <0 0x1a0c4300 0 0x100>;
+				clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@1a1c4900 {
+				reg = <0 0x1a1c4900 0 0x700>;
+				clocks = <&clk20m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		pciesys: syscon@1a100800 {
+			compatible = "mediatek,mt7629-pciesys", "syscon";
+			reg = <0 0x1a100800 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ethsys: syscon@1b000000 {
+			compatible = "mediatek,mt7629-ethsys", "syscon";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sgmiisys0: syscon@1b128000 {
+			compatible = "mediatek,mt7629-sgmiisys", "syscon";
+			reg = <0 0x1b128000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@1b130000 {
+			compatible = "mediatek,mt7629-sgmiisys", "syscon";
+			reg = <0 0x1b130000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/include/dt-bindings/reset/mt7629-resets.h b/include/dt-bindings/reset/mt7629-resets.h
new file mode 100644
index 0000000..6bb8573
--- /dev/null
+++ b/include/dt-bindings/reset/mt7629-resets.h
@@ -0,0 +1,71 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7629
+#define _DT_BINDINGS_RESET_CONTROLLER_MT7629
+
+/* INFRACFG resets */
+#define MT7629_INFRA_EMI_MPU_RST		0
+#define MT7629_INFRA_UART5_RST			2
+#define MT7629_INFRA_CIRQ_EINT_RST		3
+#define MT7629_INFRA_APXGPT_RST			4
+#define MT7629_INFRA_SCPSYS_RST			5
+#define MT7629_INFRA_KP_RST			6
+#define MT7629_INFRA_SPI1_RST			7
+#define MT7629_INFRA_SPI4_RST			8
+#define MT7629_INFRA_SYSTIMER_RST		9
+#define MT7629_INFRA_IRRX_RST			10
+#define MT7629_INFRA_AO_BUS_RST			16
+#define MT7629_INFRA_EMI_RST			32
+#define MT7629_INFRA_APMIXED_RST		35
+#define MT7629_INFRA_MIPI_RST			36
+#define MT7629_INFRA_TRNG_RST			37
+#define MT7629_INFRA_SYSCIRQ_RST		38
+#define MT7629_INFRA_MIPI_CSI_RST		39
+#define MT7629_INFRA_GCE_FAXI_RST		40
+#define MT7629_INFRA_I2C_SRAM_RST		41
+#define MT7629_INFRA_IOMMU_RST			47
+
+/* PERICFG resets */
+#define MT7629_PERI_UART0_SW_RST		0
+#define MT7629_PERI_UART1_SW_RST		1
+#define MT7629_PERI_UART2_SW_RST		2
+#define MT7629_PERI_BTIF_SW_RST			6
+#define MT7629_PERI_PWN_SW_RST			8
+#define MT7629_PERI_DMA_SW_RST			11
+#define MT7629_PERI_NFI_SW_RST			14
+#define MT7629_PERI_I2C0_SW_RST			22
+#define MT7629_PERI_SPI0_SW_RST			33
+#define MT7629_PERI_SPI1_SW_RST			34
+#define MT7629_PERI_FLASHIF_SW_RST		36
+
+/* PCIe Subsystem resets */
+#define MT7629_PCIE1_CORE_RST			19
+#define MT7629_PCIE1_MMIO_RST			20
+#define MT7629_PCIE1_HRST			21
+#define MT7629_PCIE1_USER_RST			22
+#define MT7629_PCIE1_PIPE_RST			23
+#define MT7629_PCIE0_CORE_RST			27
+#define MT7629_PCIE0_MMIO_RST			28
+#define MT7629_PCIE0_HRST			29
+#define MT7629_PCIE0_USER_RST			30
+#define MT7629_PCIE0_PIPE_RST			31
+
+/* SSUSB Subsystem resets */
+#define MT7629_SSUSB_PHY_PWR_RST		3
+#define MT7629_SSUSB_MAC_PWR_RST		4
+
+/* ETH Subsystem resets */
+#define MT7629_ETHSYS_SYS_RST			0
+#define MT7629_ETHSYS_MCM_RST			2
+#define MT7629_ETHSYS_HSDMA_RST			5
+#define MT7629_ETHSYS_FE_RST			6
+#define MT7629_ETHSYS_ESW_RST			16
+#define MT7629_ETHSYS_GMAC_RST			23
+#define MT7629_ETHSYS_EPHY_RST			24
+#define MT7629_ETHSYS_CRYPTO_RST		29
+#define MT7629_ETHSYS_PPE_RST			31
+
+#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT7629 */