@@ -42,6 +42,12 @@
#define PA0_RG_U2PLL_FORCE_ON BIT(15)
#define PA0_RG_USB20_INTR_EN BIT(5)
+#define U3P_USBPHYACR1 0x004
+#define PA1_RG_VRT_SEL GENMASK(14, 12)
+#define PA1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12)
+#define PA1_RG_TERM_SEL GENMASK(10, 8)
+#define PA1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8)
+
#define U3P_USBPHYACR2 0x008
#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
@@ -288,6 +294,9 @@ struct mtk_phy_instance {
struct clk *ref_clk; /* reference clock of anolog phy */
u32 index;
u8 type;
+ int eye_src;
+ int eye_vrt;
+ int eye_term;
};
struct mtk_tphy {
@@ -312,6 +321,10 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
int fm_out;
u32 tmp;
+ /* use force value */
+ if (instance->eye_src)
+ return;
+
/* enable USB ring oscillator */
tmp = readl(com + U3P_USBPHYACR5);
tmp |= PA5_RG_U2_HSTX_SRCAL_EN;
@@ -818,6 +831,52 @@ static void phy_v2_banks_init(struct mtk_tphy *tphy,
}
}
+static void phy_parse_property(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct device *dev = &instance->phy->dev;
+
+ if (instance->type != PHY_TYPE_USB2)
+ return;
+
+ device_property_read_u32(dev, "mediatek,eye-src",
+ &instance->eye_src);
+ device_property_read_u32(dev, "mediatek,eye-vrt",
+ &instance->eye_vrt);
+ device_property_read_u32(dev, "mediatek,eye-term",
+ &instance->eye_term);
+}
+
+static void u2_phy_props_set(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 tmp;
+
+
+ if (instance->eye_src) {
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
+ tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(instance->eye_src);
+ writel(tmp, com + U3P_USBPHYACR5);
+ }
+
+ if (instance->eye_vrt) {
+ tmp = readl(com + U3P_USBPHYACR1);
+ tmp &= ~PA1_RG_VRT_SEL;
+ tmp |= PA1_RG_VRT_SEL_VAL(instance->eye_vrt);
+ writel(tmp, com + U3P_USBPHYACR1);
+ }
+
+ if (instance->eye_term) {
+ tmp = readl(com + U3P_USBPHYACR1);
+ tmp &= ~PA1_RG_TERM_SEL;
+ tmp |= PA1_RG_TERM_SEL_VAL(instance->eye_term);
+ writel(tmp, com + U3P_USBPHYACR1);
+ }
+}
+
static int mtk_phy_init(struct phy *phy)
{
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
@@ -839,6 +898,7 @@ static int mtk_phy_init(struct phy *phy)
switch (instance->type) {
case PHY_TYPE_USB2:
u2_phy_instance_init(tphy, instance);
+ u2_phy_props_set(tphy, instance);
break;
case PHY_TYPE_USB3:
u3_phy_instance_init(tphy, instance);
@@ -951,6 +1011,8 @@ static struct phy *mtk_phy_xlate(struct device *dev,
return ERR_PTR(-EINVAL);
}
+ phy_parse_property(tphy, instance);
+
return instance->phy;
}
Add properties for Eye diagram test of HQA which sometimes need adjust some parameters of u2phy Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- drivers/phy/mediatek/phy-mtk-tphy.c | 62 +++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)