mbox series

[0/4] Lantiq VRX200/ARX300 PCIe PHY driver

Message ID 20190702203523.2412-1-martin.blumenstingl@googlemail.com
Headers show
Series Lantiq VRX200/ARX300 PCIe PHY driver | expand


Martin Blumenstingl July 2, 2019, 8:35 p.m. UTC
Various Lantiq (now Intel) SoCs contain one or more PCIe controllers
and PHYs.
This adds a driver for the PCIe PHYs found on the Lantiq VRX200 and
ARX300 SoCs. GRX390 should also be supported as far as I can tell,
but I don't have any of these devices to further verify that.

I have tested this PCIe PHY driver with the out-of-tree PCIe controller
driver in OpenWrt: [0]

dependencies for this series:

patches 1-3 should go through the PHY tree
patch 4 should go through the mips tree

I am aware that this series is too late for the v5.3 development cycle.
Getting review comments is still appreciated so this can be queued early
in the v5.4 development cycle.

[0] https://github.com/xdarklight/openwrt/commits/lantiq-mainline-pcie-phy-20190702

Martin Blumenstingl (4):
  dt-bindings: phy: add binding for the Lantiq VRX200 and ARX300 PCIe
  phy: lantiq: vrx200-pcie: add a driver for the Lantiq VRX200 PCIe PHY
  phy: enable compile-testing for the Lantiq PHY drivers
  MIPS: lantiq: update the clock alias' for the mainline PCIe PHY driver

 .../bindings/phy/lantiq,vrx200-pcie-phy.yaml  |  87 +++
 arch/mips/lantiq/xway/sysctrl.c               |  16 +-
 drivers/phy/Makefile                          |   2 +-
 drivers/phy/lantiq/Kconfig                    |  11 +
 drivers/phy/lantiq/Makefile                   |   1 +
 drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c   | 495 ++++++++++++++++++
 .../dt-bindings/phy/phy-lantiq-vrx200-pcie.h  |  11 +
 7 files changed, 614 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
 create mode 100644 drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
 create mode 100644 include/dt-bindings/phy/phy-lantiq-vrx200-pcie.h