mbox series

[v1,0/4] add dsa switch support for ar9331

Message ID 20191014061549.3669-1-o.rempel@pengutronix.de (mailing list archive)
Headers show
Series add dsa switch support for ar9331 | expand

Message

Oleksij Rempel Oct. 14, 2019, 6:15 a.m. UTC 
This patch series provides dsa switch support for Atheros ar9331 WiSoC.
As side effect ag71xx needed to be ported to phylink to make the switch
driver (as well phylink based) work properly.

Oleksij Rempel (4):
  net: ag71xx: port to phylink
  dt-bindings: net: dsa: qca,ar9331 switch documentation
  MIPS: ath79: ar9331: add ar9331-switch node
  net: dsa: add support for Atheros AR9331 build-in switch

 .../devicetree/bindings/net/dsa/ar9331.txt    | 155 ++++
 arch/mips/boot/dts/qca/ar9331.dtsi            | 128 ++-
 arch/mips/boot/dts/qca/ar9331_dpt_module.dts  |  13 +
 drivers/net/dsa/Kconfig                       |   2 +
 drivers/net/dsa/Makefile                      |   1 +
 drivers/net/dsa/qca/Kconfig                   |  11 +
 drivers/net/dsa/qca/Makefile                  |   2 +
 drivers/net/dsa/qca/ar9331.c                  | 822 ++++++++++++++++++
 drivers/net/ethernet/atheros/Kconfig          |   2 +-
 drivers/net/ethernet/atheros/ag71xx.c         | 144 +--
 include/net/dsa.h                             |   2 +
 net/dsa/Kconfig                               |   6 +
 net/dsa/Makefile                              |   1 +
 net/dsa/tag_ar9331.c                          |  97 +++
 14 files changed, 1324 insertions(+), 62 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/ar9331.txt
 create mode 100644 drivers/net/dsa/qca/Kconfig
 create mode 100644 drivers/net/dsa/qca/Makefile
 create mode 100644 drivers/net/dsa/qca/ar9331.c
 create mode 100644 net/dsa/tag_ar9331.c