mbox series

[v6,0/6] RTL9300 support for reboot and i2c

Message ID 20241015225948.3971924-1-chris.packham@alliedtelesis.co.nz (mailing list archive)
Headers show
Series RTL9300 support for reboot and i2c | expand

Message

Chris Packham Oct. 15, 2024, 10:59 p.m. UTC 
As requested I've combined my two series into a single one to provide some
better context for reviewers. I'm not sure which trees the patches should go in
via. The first two are reasonably independent and could go in via linux-pm. I
guess technically the last one could go via linux-i2c but it needs the and the
bindings/dts updates which would probably make sense to come via linux-mips.

--
2.46.1

Chris Packham (6):
  dt-bindings: reset: syscon-reboot: Add reg property
  power: reset: syscon-reboot: Accept reg property
  dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  mips: dts: realtek: Add syscon-reboot node
  mips: dts: realtek: Add I2C controllers
  i2c: Add driver for the RTL9300 I2C controller

 .../bindings/i2c/realtek,rtl9301-i2c.yaml     |  99 ++++
 .../bindings/mfd/realtek,rtl9301-switch.yaml  | 114 +++++
 .../bindings/power/reset/syscon-reboot.yaml   |  11 +-
 MAINTAINERS                                   |   7 +
 .../cameo-rtl9302c-2x-rtl8224-2xge.dts        |   2 +-
 arch/mips/boot/dts/realtek/rtl9302c.dtsi      |  15 +
 arch/mips/boot/dts/realtek/rtl930x.dtsi       |  29 ++
 drivers/i2c/busses/Kconfig                    |  10 +
 drivers/i2c/busses/Makefile                   |   1 +
 drivers/i2c/busses/i2c-rtl9300.c              | 425 ++++++++++++++++++
 drivers/power/reset/syscon-reboot.c           |   3 +-
 11 files changed, 713 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml
 create mode 100644 arch/mips/boot/dts/realtek/rtl9302c.dtsi
 create mode 100644 drivers/i2c/busses/i2c-rtl9300.c

Comments

Sebastian Reichel Oct. 16, 2024, 9:41 p.m. UTC | #1 
On Wed, 16 Oct 2024 11:59:42 +1300, Chris Packham wrote:
> As requested I've combined my two series into a single one to provide some
> better context for reviewers. I'm not sure which trees the patches should go in
> via. The first two are reasonably independent and could go in via linux-pm. I
> guess technically the last one could go via linux-i2c but it needs the and the
> bindings/dts updates which would probably make sense to come via linux-mips.
> 
> --
> 2.46.1
> 
> [...]

Applied, thanks!

[1/6] dt-bindings: reset: syscon-reboot: Add reg property
      commit: e7af7d13316dc5e2293c4f777f71bd8331f5d7a5
[2/6] power: reset: syscon-reboot: Accept reg property
      commit: ce38cdc908557953604ffb0a91ef5ae3fbdf1c6b

Best regards,