[v5,0/7] MIPS: JZ4780 and CI20 HDMI

Message

H. Nikolaus Schaller Oct. 5, 2021, 12:29 p.m. UTC

PATCH V5  2021-10-05 14:28:44:
- dropped mode_fixup and timings support in dw-hdmi as it is no longer needed in this V5 (by [e-mail])
- dropped "drm/ingenic: add some jz4780 specific features" (stimulated by [e-mail])
- fixed typo in commit subject: "synopsis" -> "synopsys" (by [e-mail])
- swapped clocks in jz4780.dtsi to match synopsys,dw-hdmi.yaml (by [e-mail])
- improved, simplified, fixed, dtbschecked ingenic-jz4780-hdmi.yaml and made dependent of bridge/synopsys,dw-hdmi.yaml (based on suggestions by [e-mail])
- fixed binding vs. driver&DTS use of hdmi-5v regulator (suggested by [e-mail])
- dropped "drm/bridge: synopsis: Fix to properly handle HPD" - was a no longer needed workaround for a previous version
  (suggested by [e-mail])

PATCH V4 2021-09-27 18:44:38:
- fix setting output_port = 1 (issue found by [e-mail])
- ci20.dts: convert to use hdmi-connector (by [e-mail])
- add a hdmi-regulator to control +5V power (by [e-mail])
- added a fix to dw-hdmi to call drm_kms_helper_hotplug_event on plugin event detection (by [e-mail])
- always allocate extended descriptor but initialize only for jz4780 (by [e-mail])
- updated to work on top of "[PATCH v3 0/6] drm/ingenic: Various improvements v3" (by [e-mail])
- rebased to v5.13-rc3

PATCH V3 2021-08-08 07:10:50:
This series adds HDMI support for JZ4780 and CI20 board (and fixes one IPU related issue in registration error path)
- [patch 1/8] switched from mode_fixup to atomic_check (suggested by [e-mail])
  - the call to the dw-hdmi specialization is still called mode_fixup
- [patch 3/8] diverse fixes for ingenic-drm-drv (suggested by [e-mail])
  - factor out some non-HDMI features of the jz4780 into a separate patch
  - multiple fixes around max height
  - do not change regmap config but a copy on stack
  - define some constants
  - factor out fixing of drm_init error path for IPU into separate patch
  - use FIELD_PREP()
- [patch 8/8] conversion to component framework dropped (suggested by [e-mail] and [e-mail])

PATCH V2 2021-08-05 16:08:05:
This series adds HDMI support for JZ4780 and CI20 board

V2:
- code and commit messages revisited for checkpatch warnings
- rebased on v5.14-rc4
- include (failed, hence RFC 8/8) attempt to convert to component framework
  (was suggested by Paul Cercueil <[e-mail]> a while ago)


H. Nikolaus Schaller (1):
  MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ4780

Paul Boddie (5):
  drm/ingenic: Fix drm_init error path if IPU was registered
  drm/ingenic: Add support for JZ4780 and HDMI output
  drm/ingenic: Add dw-hdmi driver for jz4780
  MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD
    controllers
  MIPS: DTS: CI20: Add DT nodes for HDMI setup

Sam Ravnborg (1):
  dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema

 .../bindings/display/ingenic-jz4780-hdmi.yaml |  79 +++++++++++
 arch/mips/boot/dts/ingenic/ci20.dts           |  67 ++++++++++
 arch/mips/boot/dts/ingenic/jz4780.dtsi        |  45 +++++++
 arch/mips/configs/ci20_defconfig              |   6 +
 drivers/gpu/drm/ingenic/Kconfig               |   9 ++
 drivers/gpu/drm/ingenic/Makefile              |   1 +
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c     |  96 +++++++++++++-
 drivers/gpu/drm/ingenic/ingenic-drm.h         |  42 ++++++
 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c     | 125 ++++++++++++++++++
 9 files changed, 464 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
 create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c