| Message ID | 0cc9510007f85a8d38d176d835d82c9baef132e4.1583515771.git.hns@goldelico.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | MIPS: Fixes and improvements for CI20 board (JZ4780) | expand |
Hi Nikolaus, Le ven., mars 6, 2020 at 18:29, H. Nikolaus Schaller <hns@goldelico.com> a écrit : > From: Alex Smith <alex.smith@imgtec.com> > > The infrared sensor on the CI20 board is connected to a GPIO and can > be operated by using the gpio-ir-recv driver. Add a DT node for the > sensor to allow that driver to be used. > > Signed-off-by: Alex Smith <alex.smith@imgtec.com> > Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> > --- > arch/mips/boot/dts/ingenic/ci20.dts | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/mips/boot/dts/ingenic/ci20.dts > b/arch/mips/boot/dts/ingenic/ci20.dts > index c340f947baa0..e6ae08c979ea 100644 > --- a/arch/mips/boot/dts/ingenic/ci20.dts > +++ b/arch/mips/boot/dts/ingenic/ci20.dts > @@ -62,6 +62,11 @@ > enable-active-high; > }; > > + ir: ir-receiver { According to Documentation/devicetree/bindings/media/rc.yaml, the node should be named just "ir". Cheers, -Paul > + compatible = "gpio-ir-receiver"; > + gpios = <&gpe 3 GPIO_ACTIVE_LOW>; > + }; > + > wlan0_power: fixedregulator@1 { > compatible = "regulator-fixed"; > regulator-name = "wlan0_power"; > -- > 2.23.0 >
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index c340f947baa0..e6ae08c979ea 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -62,6 +62,11 @@ enable-active-high; }; + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpe 3 GPIO_ACTIVE_LOW>; + }; + wlan0_power: fixedregulator@1 { compatible = "regulator-fixed"; regulator-name = "wlan0_power";