diff mbox series

[25/41] drivers: tty: serial: timbuart: fix formatting issues

Message ID 1556369542-13247-26-git-send-email-info@metux.net (mailing list archive)
State Not Applicable
Headers show
Series [01/41] drivers: tty: serial: dz: use dev_err() instead of printk() | expand

Commit Message

Enrico Weigelt, metux IT consult April 27, 2019, 12:52 p.m. UTC 
Fix checkpatch warnings:

    WARNING: Missing a blank line after declarations
    #43: FILE: drivers/tty/serial/timbuart.c:43:
    +	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
    +	iowrite32(ier, port->membase + TIMBUART_IER);

    WARNING: Missing a blank line after declarations
    #50: FILE: drivers/tty/serial/timbuart.c:50:
    +	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
    +	iowrite32(ier, port->membase + TIMBUART_IER);

    WARNING: Missing a blank line after declarations
    #86: FILE: drivers/tty/serial/timbuart.c:86:
    +		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
    +		port->icount.rx++;

    WARNING: Missing a blank line after declarations
    #202: FILE: drivers/tty/serial/timbuart.c:202:
    +	u8 cts = ioread8(port->membase + TIMBUART_CTRL);
    +	dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);

    WARNING: Block comments use * on subsequent lines
    #296: FILE: drivers/tty/serial/timbuart.c:296:
    +	/* The serial layer calls into this once with old = NULL when setting
    +	   up initially */

    WARNING: Block comments use a trailing */ on a separate line
    #296: FILE: drivers/tty/serial/timbuart.c:296:

Signed-off-by: Enrico Weigelt <info@metux.net>
---
 drivers/tty/serial/timbuart.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index dcce936..d80c332 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -40,6 +40,7 @@  static void timbuart_stop_rx(struct uart_port *port)
 {
 	/* spin lock held by upper layer, disable all RX interrupts */
 	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
+
 	iowrite32(ier, port->membase + TIMBUART_IER);
 }
 
@@ -47,6 +48,7 @@  static void timbuart_stop_tx(struct uart_port *port)
 {
 	/* spinlock held by upper layer, disable TX interrupt */
 	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
+
 	iowrite32(ier, port->membase + TIMBUART_IER);
 }
 
@@ -83,6 +85,7 @@  static void timbuart_rx_chars(struct uart_port *port)
 
 	while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
 		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
+
 		port->icount.rx++;
 		tty_insert_flip_char(tport, ch, TTY_NORMAL);
 	}
@@ -199,6 +202,7 @@  static void timbuart_tasklet(unsigned long arg)
 static unsigned int timbuart_get_mctrl(struct uart_port *port)
 {
 	u8 cts = ioread8(port->membase + TIMBUART_CTRL);
+
 	dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
 
 	if (cts & TIMBUART_CTRL_CTS)
@@ -293,7 +297,8 @@  static void timbuart_set_termios(struct uart_port *port,
 	baud = baudrates[bindex];
 
 	/* The serial layer calls into this once with old = NULL when setting
-	   up initially */
+	 * up initially
+	 */
 	if (old)
 		tty_termios_copy_hw(termios, old);
 	tty_termios_encode_baud_rate(termios, baud, baud);
@@ -500,4 +505,3 @@  static int timbuart_remove(struct platform_device *dev)
 MODULE_DESCRIPTION("Timberdale UART driver");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:timb-uart");
-