[v3,1/3] MIPS: Loongson: Get host bridge information

Commit Message

Tiezhu Yang March 31, 2020, 1:33 p.m. UTC

Read the address of host bridge configuration space to get the vendor ID
and device ID of host bridge, and then we can distinguish various types
of host bridge such as Loongson 7A1000 or AMD RS780E.

Signed-off-by: Tiezhu Yang <[e-mail]>
---

v3:
  - Modify the macro definition HOST_BRIDGE_CONFIG_ADDR and
    add comment to make it easy to read.
  - Use PCI_VENDOR_ID_LOONGSON in pci_ids.h instead of 0x0014

  PCI_VENDOR_ID_LOONGSON depends on the mainline tree's commit:
  https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9acb9fe18d86

 arch/mips/include/asm/mach-loongson64/boot_param.h |  6 ++++++
 arch/mips/loongson64/env.c                         | 18 ++++++++++++++++++
 2 files changed, 24 insertions(+)

Patch

diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index 2ed483e..a272427 100644
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -192,6 +192,11 @@  struct boot_params {
 	struct efi_reset_system_t reset_system;
 };
 
+enum loongson_bridge_type {
+	RS780E = 1,
+	LS7A1000 = 2
+};
+
 struct loongson_system_configuration {
 	u32 nr_cpus;
 	u32 nr_nodes;
@@ -200,6 +205,7 @@  struct loongson_system_configuration {
 	u16 boot_cpu_id;
 	u16 reserved_cpus_mask;
 	enum loongson_cpu_type cputype;
+	enum loongson_bridge_type bridgetype;
 	u64 ht_control_base;
 	u64 pci_mem_start_addr;
 	u64 pci_mem_end_addr;
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 2554ef1..257a9b6 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -14,12 +14,15 @@ 
  * Author: Wu Zhangjin, [e-mail]
  */
 #include <linux/export.h>
+#include <linux/pci_ids.h>
 #include <asm/bootinfo.h>
 #include <loongson.h>
 #include <boot_param.h>
 #include <builtin_dtbs.h>
 #include <workarounds.h>
 
+#define HOST_BRIDGE_CONFIG_ADDR	((void __iomem *)TO_UNCAC(0x1a000000))
+
 u32 cpu_clock_freq;
 EXPORT_SYMBOL(cpu_clock_freq);
 struct efi_memory_map_loongson *loongson_memmap;
@@ -43,6 +46,8 @@  void __init prom_init_env(void)
 	struct system_loongson *esys;
 	struct efi_cpuinfo_loongson *ecpu;
 	struct irq_source_routing_table *eirq_source;
+	u32 id;
+	u16 vendor, device;
 
 	/* firmware arguments are initialized in head.S */
 	boot_p = (struct boot_params *)fw_arg2;
@@ -178,4 +183,17 @@  void __init prom_init_env(void)
 		memcpy(loongson_sysconf.sensors, esys->sensors,
 			sizeof(struct sensor_device) * loongson_sysconf.nr_sensors);
 	pr_info("CpuClock = %u\n", cpu_clock_freq);
+
+	/* Read the ID of PCI host bridge to detect bridge type */
+	id = readl(HOST_BRIDGE_CONFIG_ADDR);
+	vendor = id & 0xffff;
+	device = (id >> 16) & 0xffff;
+
+	if (vendor == PCI_VENDOR_ID_LOONGSON && device == 0x7a00) {
+		pr_info("The bridge chip is Loongson 7A1000\n");
+		loongson_sysconf.bridgetype = LS7A1000;
+	} else {
+		pr_info("The bridge chip is AMD RS780E or SR5690\n");
+		loongson_sysconf.bridgetype = RS780E;
+	}
 }