| Message ID | 1624981102-26248-9-git-send-email-zhouyanjie@wanyeetech.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add new clocks and fix bugs for Ingenic SoCs. | expand |
On Tue, Jun 29, 2021 at 11:38:19PM +0800, 周琰杰 (Zhou Yanjie) wrote: > Add the clock bindings for the JZ4775 SoC from Ingenic. > > Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> > --- > > Notes: > v5: > New patch. > > v5->v6: > No change. > > include/dt-bindings/clock/jz4775-cgu.h | 59 ++++++++++++++++++++++++++++++++++ > 1 file changed, 59 insertions(+) > create mode 100644 include/dt-bindings/clock/jz4775-cgu.h > > diff --git a/include/dt-bindings/clock/jz4775-cgu.h b/include/dt-bindings/clock/jz4775-cgu.h > new file mode 100644 > index 00000000..8c2af69 > --- /dev/null > +++ b/include/dt-bindings/clock/jz4775-cgu.h > @@ -0,0 +1,59 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ Dual license please. > +/* > + * This header provides clock numbers for the ingenic,jz4775-cgu DT binding. > + * > + * They are roughly ordered as: > + * - external clocks > + * - PLLs > + * - muxes/dividers in the order they appear in the jz4775 programmers manual > + * - gates in order of their bit in the CLKGR* registers Can one convert index to register/bit offset? If you can avoid made up numbers and use something that corresponds to the h/w, that's preferred. > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ > +#define __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ > + > +#define JZ4775_CLK_EXCLK 0 > +#define JZ4775_CLK_RTCLK 1 > +#define JZ4775_CLK_APLL 2 > +#define JZ4775_CLK_MPLL 3 > +#define JZ4775_CLK_OTGPHY 4 > +#define JZ4775_CLK_SCLKA 5 > +#define JZ4775_CLK_UHC 6 > +#define JZ4775_CLK_UHCPHY 7 > +#define JZ4775_CLK_CPUMUX 8 > +#define JZ4775_CLK_CPU 9 > +#define JZ4775_CLK_L2CACHE 10 > +#define JZ4775_CLK_AHB0 11 > +#define JZ4775_CLK_AHB2PMUX 12 > +#define JZ4775_CLK_AHB2 13 > +#define JZ4775_CLK_PCLK 14 > +#define JZ4775_CLK_DDR 15 > +#define JZ4775_CLK_VPU 16 > +#define JZ4775_CLK_OTG 17 > +#define JZ4775_CLK_EXCLK_DIV2 18 > +#define JZ4775_CLK_I2S 19 > +#define JZ4775_CLK_LCD 20 > +#define JZ4775_CLK_MSCMUX 21 > +#define JZ4775_CLK_MSC0 22 > +#define JZ4775_CLK_MSC1 23 > +#define JZ4775_CLK_MSC2 24 > +#define JZ4775_CLK_SSI 25 > +#define JZ4775_CLK_CIM0 26 > +#define JZ4775_CLK_CIM1 27 > +#define JZ4775_CLK_PCM 28 > +#define JZ4775_CLK_BCH 29 > +#define JZ4775_CLK_EXCLK_DIV512 30 > +#define JZ4775_CLK_RTC 31 > +#define JZ4775_CLK_NEMC 32 > +#define JZ4775_CLK_I2C0 33 > +#define JZ4775_CLK_I2C1 34 > +#define JZ4775_CLK_I2C2 35 > +#define JZ4775_CLK_SADC 36 > +#define JZ4775_CLK_UART0 37 > +#define JZ4775_CLK_UART1 38 > +#define JZ4775_CLK_UART2 39 > +#define JZ4775_CLK_UART3 40 > +#define JZ4775_CLK_PDMA 41 > +#define JZ4775_CLK_MAC 42 > + > +#endif /* __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ */ > -- > 2.7.4 > >
Hi Rob, On 2021/7/14 上午6:34, Rob Herring wrote: > On Tue, Jun 29, 2021 at 11:38:19PM +0800, 周琰杰 (Zhou Yanjie) wrote: >> Add the clock bindings for the JZ4775 SoC from Ingenic. >> >> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> >> --- >> >> Notes: >> v5: >> New patch. >> >> v5->v6: >> No change. >> >> include/dt-bindings/clock/jz4775-cgu.h | 59 ++++++++++++++++++++++++++++++++++ >> 1 file changed, 59 insertions(+) >> create mode 100644 include/dt-bindings/clock/jz4775-cgu.h >> >> diff --git a/include/dt-bindings/clock/jz4775-cgu.h b/include/dt-bindings/clock/jz4775-cgu.h >> new file mode 100644 >> index 00000000..8c2af69 >> --- /dev/null >> +++ b/include/dt-bindings/clock/jz4775-cgu.h >> @@ -0,0 +1,59 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ > Dual license please. Sure, I will change it in v2. >> +/* >> + * This header provides clock numbers for the ingenic,jz4775-cgu DT binding. >> + * >> + * They are roughly ordered as: >> + * - external clocks >> + * - PLLs >> + * - muxes/dividers in the order they appear in the jz4775 programmers manual >> + * - gates in order of their bit in the CLKGR* registers > Can one convert index to register/bit offset? If you can avoid made up > numbers and use something that corresponds to the h/w, that's preferred. > Unfortunately, only part of these clocks are related to registers or bits, and the rest are not related to both, so we can't perform the kind of conversion you mentioned. Thanks and best regards! >> + */ >> + >> +#ifndef __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ >> +#define __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ >> + >> +#define JZ4775_CLK_EXCLK 0 >> +#define JZ4775_CLK_RTCLK 1 >> +#define JZ4775_CLK_APLL 2 >> +#define JZ4775_CLK_MPLL 3 >> +#define JZ4775_CLK_OTGPHY 4 >> +#define JZ4775_CLK_SCLKA 5 >> +#define JZ4775_CLK_UHC 6 >> +#define JZ4775_CLK_UHCPHY 7 >> +#define JZ4775_CLK_CPUMUX 8 >> +#define JZ4775_CLK_CPU 9 >> +#define JZ4775_CLK_L2CACHE 10 >> +#define JZ4775_CLK_AHB0 11 >> +#define JZ4775_CLK_AHB2PMUX 12 >> +#define JZ4775_CLK_AHB2 13 >> +#define JZ4775_CLK_PCLK 14 >> +#define JZ4775_CLK_DDR 15 >> +#define JZ4775_CLK_VPU 16 >> +#define JZ4775_CLK_OTG 17 >> +#define JZ4775_CLK_EXCLK_DIV2 18 >> +#define JZ4775_CLK_I2S 19 >> +#define JZ4775_CLK_LCD 20 >> +#define JZ4775_CLK_MSCMUX 21 >> +#define JZ4775_CLK_MSC0 22 >> +#define JZ4775_CLK_MSC1 23 >> +#define JZ4775_CLK_MSC2 24 >> +#define JZ4775_CLK_SSI 25 >> +#define JZ4775_CLK_CIM0 26 >> +#define JZ4775_CLK_CIM1 27 >> +#define JZ4775_CLK_PCM 28 >> +#define JZ4775_CLK_BCH 29 >> +#define JZ4775_CLK_EXCLK_DIV512 30 >> +#define JZ4775_CLK_RTC 31 >> +#define JZ4775_CLK_NEMC 32 >> +#define JZ4775_CLK_I2C0 33 >> +#define JZ4775_CLK_I2C1 34 >> +#define JZ4775_CLK_I2C2 35 >> +#define JZ4775_CLK_SADC 36 >> +#define JZ4775_CLK_UART0 37 >> +#define JZ4775_CLK_UART1 38 >> +#define JZ4775_CLK_UART2 39 >> +#define JZ4775_CLK_UART3 40 >> +#define JZ4775_CLK_PDMA 41 >> +#define JZ4775_CLK_MAC 42 >> + >> +#endif /* __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ */ >> -- >> 2.7.4 >> >>
diff --git a/include/dt-bindings/clock/jz4775-cgu.h b/include/dt-bindings/clock/jz4775-cgu.h new file mode 100644 index 00000000..8c2af69 --- /dev/null +++ b/include/dt-bindings/clock/jz4775-cgu.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides clock numbers for the ingenic,jz4775-cgu DT binding. + * + * They are roughly ordered as: + * - external clocks + * - PLLs + * - muxes/dividers in the order they appear in the jz4775 programmers manual + * - gates in order of their bit in the CLKGR* registers + */ + +#ifndef __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ +#define __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ + +#define JZ4775_CLK_EXCLK 0 +#define JZ4775_CLK_RTCLK 1 +#define JZ4775_CLK_APLL 2 +#define JZ4775_CLK_MPLL 3 +#define JZ4775_CLK_OTGPHY 4 +#define JZ4775_CLK_SCLKA 5 +#define JZ4775_CLK_UHC 6 +#define JZ4775_CLK_UHCPHY 7 +#define JZ4775_CLK_CPUMUX 8 +#define JZ4775_CLK_CPU 9 +#define JZ4775_CLK_L2CACHE 10 +#define JZ4775_CLK_AHB0 11 +#define JZ4775_CLK_AHB2PMUX 12 +#define JZ4775_CLK_AHB2 13 +#define JZ4775_CLK_PCLK 14 +#define JZ4775_CLK_DDR 15 +#define JZ4775_CLK_VPU 16 +#define JZ4775_CLK_OTG 17 +#define JZ4775_CLK_EXCLK_DIV2 18 +#define JZ4775_CLK_I2S 19 +#define JZ4775_CLK_LCD 20 +#define JZ4775_CLK_MSCMUX 21 +#define JZ4775_CLK_MSC0 22 +#define JZ4775_CLK_MSC1 23 +#define JZ4775_CLK_MSC2 24 +#define JZ4775_CLK_SSI 25 +#define JZ4775_CLK_CIM0 26 +#define JZ4775_CLK_CIM1 27 +#define JZ4775_CLK_PCM 28 +#define JZ4775_CLK_BCH 29 +#define JZ4775_CLK_EXCLK_DIV512 30 +#define JZ4775_CLK_RTC 31 +#define JZ4775_CLK_NEMC 32 +#define JZ4775_CLK_I2C0 33 +#define JZ4775_CLK_I2C1 34 +#define JZ4775_CLK_I2C2 35 +#define JZ4775_CLK_SADC 36 +#define JZ4775_CLK_UART0 37 +#define JZ4775_CLK_UART1 38 +#define JZ4775_CLK_UART2 39 +#define JZ4775_CLK_UART3 40 +#define JZ4775_CLK_PDMA 41 +#define JZ4775_CLK_MAC 42 + +#endif /* __DT_BINDINGS_CLOCK_JZ4775_CGU_H__ */
Add the clock bindings for the JZ4775 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> --- Notes: v5: New patch. v5->v6: No change. include/dt-bindings/clock/jz4775-cgu.h | 59 ++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 include/dt-bindings/clock/jz4775-cgu.h