@@ -16839,6 +16839,13 @@ S: Maintained
F: Documentation/input/devices/yealink.rst
F: drivers/input/misc/yealink.*
+YEELOONG ENE KB3310B MFD DRIVER
+M: Tom Li <tomli@tomli.me>
+L: linux-mips@vger.kernel.org
+S: Maintained
+F: drivers/mfd/yeeloong_kb3310b.c
+F: include/linux/mfd/yeeloong_kb3310b.h
+
Z8530 DRIVER FOR AX.25
M: Joerg Reuter <jreuter@yaina.de>
W: http://yaina.de/jreuter/
@@ -1872,6 +1872,16 @@ config MFD_STM32_TIMERS
for PWM and IIO Timer. This driver allow to share the
registers between the others drivers.
+config MFD_YEELOONG_KB3310B
+ bool "ENE KB3310B Embedded Controller on Lemote Yeeloong laptops"
+ depends on (MIPS && LEMOTE_MACH2F) || COMPILE_TEST
+ select MFD_CORE
+ help
+ Select this option to enable ENE KB3310B Embedded Controller
+ driver used on Lemote Yeeloong laptops, providing power, battery
+ and backlight services. This is a mandatory dependency for
+ Lemote 2F systems.
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
@@ -224,6 +224,7 @@ obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
obj-$(CONFIG_MFD_SKY81452) += sky81452.o
+obj-$(CONFIG_MFD_YEELOONG_KB3310B) += yeeloong_kb3310b.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
new file mode 100644
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * MFD driver for ENE KB3310B embedded controller on Lemote Yeeloong laptops
+ *
+ * Copyright (C) 2008 Lemote Inc.
+ * Author: liujl <liujl@lemote.com>, 2008-04-20
+ *
+ * Copyright (C) 2018 Yifeng Li
+ * Author: Yifeng Li <tomli@tomli.me>
+ *
+ * This is a MFD driver for the ENE KB3310B Embedded Controller for Lemote
+ * Yeeloong laptops to provide utility functions to access the chip from
+ * subdrivers, and handle events and interrupts in board files. This is a
+ * special-purpose driver, and it's only used on Lemote Yeeloong laptops,
+ * and is a mandatory dependency.
+ *
+ * My original attempt was to create a regmap for subdrivers to access the
+ * EC, unfortunately, the board files in Linux/MIPS still needs to access
+ * the EC directly for power management. Unless we find a better home for
+ * those code, we simply export the EC-related functions.
+ */
+
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/delay.h>
+
+#include <linux/mfd/yeeloong_kb3310b.h>
+
+#define DRV_NAME "yeeloong_kb3310b: "
+
+/*****************************************************************************
+ * Most drivers, such as battery or backlight drivers, uses the I/O ports to
+ * access the Index Registers to obtain hardware status and information from
+ * EC chip.
+ ****************************************************************************/
+static struct kb3310b_chip *kb3310b_fwinfo;
+
+static const struct mfd_cell kb3310b_cells[] = {
+ {
+ .name = "yeeloong_sci"
+ },
+ {
+ .name = "yeeloong_hwmon"
+ },
+ {
+ .name = "yeeloong_battery"
+ },
+ {
+ .name = "yeeloong_backlight"
+ },
+ {
+ .name = "yeeloong_lcd"
+ },
+ {
+ .name = "yeeloong_hotkey"
+ },
+};
+
+static DEFINE_SPINLOCK(kb3310b_index_lock);
+
+u8 kb3310b_read(u16 reg)
+{
+ unsigned long flags;
+ u8 val;
+
+ spin_lock_irqsave(&kb3310b_index_lock, flags);
+
+ outb((reg & 0xff00) >> 8, KB3310B_IO_PORT_HIGH);
+ outb((reg & 0x00ff), KB3310B_IO_PORT_LOW);
+ val = inb(KB3310B_IO_PORT_DATA);
+
+ spin_unlock_irqrestore(&kb3310b_index_lock, flags);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(kb3310b_read);
+
+void kb3310b_write(u16 reg, u8 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&kb3310b_index_lock, flags);
+
+ outb((reg & 0xff00) >> 8, KB3310B_IO_PORT_HIGH);
+ outb((reg & 0x00ff), KB3310B_IO_PORT_LOW);
+ outb(val, KB3310B_IO_PORT_DATA);
+ inb(KB3310B_IO_PORT_DATA); /* flush pending writes */
+
+ spin_unlock_irqrestore(&kb3310b_index_lock, flags);
+}
+EXPORT_SYMBOL_GPL(kb3310b_write);
+
+bool kb3310b_fw_earlier(char *version)
+{
+ return (strncasecmp(kb3310b_fwinfo->version,
+ version, KB3310B_VERSION_LEN) < 0);
+}
+EXPORT_SYMBOL_GPL(kb3310b_fw_earlier);
+
+static int kb3310b_probe(struct platform_device *pdev)
+{
+ kb3310b_fwinfo = dev_get_platdata(&pdev->dev);
+ pr_info(DRV_NAME "firmware version %s", kb3310b_fwinfo->version);
+
+ return devm_mfd_add_devices(&pdev->dev, -1, kb3310b_cells,
+ ARRAY_SIZE(kb3310b_cells), NULL, 0, NULL);
+}
+
+static struct platform_driver kb3310b_driver = {
+ .driver = {
+ .name = "yeeloong_kb3310b",
+ },
+ .probe = kb3310b_probe,
+};
+builtin_platform_driver(kb3310b_driver);
+
+/*****************************************************************************
+ * For interrupt handling and power management, the EC chip is also needed to
+ * be queried from the board file at arch/mips/loongson64, through a separate
+ * command port.
+ *****************************************************************************/
+
+static DEFINE_SPINLOCK(kb3310b_command_lock);
+
+/*
+ * This function is used for EC command writes and corresponding status queries.
+ */
+int kb3310b_query_seq(unsigned char cmd)
+{
+ int timeout;
+ unsigned char status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&kb3310b_command_lock, flags);
+
+ /* make chip goto reset mode */
+ udelay(KB3310B_REG_UDELAY);
+ outb(cmd, KB3310B_CMD_PORT);
+ udelay(KB3310B_REG_UDELAY);
+
+ /* check if the command is received by EC */
+ timeout = KB3310B_CMD_TIMEOUT;
+ status = inb(KB3310B_STS_PORT);
+ while (timeout-- && (status & (1 << 1))) {
+ status = inb(KB3310B_STS_PORT);
+ udelay(KB3310B_REG_UDELAY);
+ }
+
+ spin_unlock_irqrestore(&kb3310b_command_lock, flags);
+
+ if (timeout <= 0) {
+ pr_err(DRV_NAME
+ "(%x/NA) failed to issue command %d, no response!\n",
+ timeout, cmd);
+ return -EINVAL;
+ }
+
+ pr_info(DRV_NAME
+ "(%x/%x) issued command %d, status: 0x%x\n",
+ timeout, KB3310B_CMD_TIMEOUT - timeout,
+ cmd, status);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kb3310b_query_seq);
+
+/*
+ * Send query command to EC to get the proper event number.
+ */
+int kb3310b_query_event_num(void)
+{
+ return kb3310b_query_seq(KB3310B_CMD_GET_EVENT_NUM);
+}
+EXPORT_SYMBOL_GPL(kb3310b_query_event_num);
+
+/*
+ * Get event number from EC.
+ *
+ * NOTE: This routine must follow the query_event_num function in the
+ * interrupt.
+ */
+int kb3310b_get_event_num(void)
+{
+ int timeout = 100;
+ unsigned char value;
+ unsigned char status;
+
+ udelay(KB3310B_REG_UDELAY);
+ status = inb(KB3310B_STS_PORT);
+ udelay(KB3310B_REG_UDELAY);
+ while (timeout-- && !(status & (1 << 0))) {
+ status = inb(KB3310B_STS_PORT);
+ udelay(KB3310B_REG_UDELAY);
+ }
+ if (timeout <= 0) {
+ pr_info("%s: get event number timeout.\n", __func__);
+ return -EINVAL;
+ }
+ value = inb(KB3310B_DAT_PORT);
+ udelay(KB3310B_REG_UDELAY);
+
+ return value;
+}
+EXPORT_SYMBOL_GPL(kb3310b_get_event_num);
new file mode 100644
@@ -0,0 +1,211 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * MFD driver for ENE KB3310B embedded controller on Lemote Yeeloong laptops
+ *
+ * Copyright (C) 2008 Lemote Inc.
+ * Author: liujl <liujl@lemote.com>, 2008-04-20
+ *
+ * Copyright (C) 2018 Yifeng Li
+ * Author: Yifeng Li <tomli@tomli.me>
+ */
+
+#ifndef __LINUX_MFD_YEELOONG_KB3310B_H
+#define __LINUX_MFD_YEELOONG_KB3310B_H
+
+extern u8 kb3310b_read(u16 reg);
+extern void kb3310b_write(u16 reg, u8 val);
+extern bool kb3310b_fw_earlier(char *version);
+extern int kb3310b_query_seq(unsigned char cmd);
+extern int kb3310b_query_event_num(void);
+extern int kb3310b_get_event_num(void);
+
+typedef int (*sci_handler) (int status);
+
+extern int yeeloong_sci_register_notify(struct notifier_block *nb);
+extern int yeeloong_sci_unregister_notify(struct notifier_block *nb);
+
+#define KB3310B_VERSION_LEN 8
+
+struct kb3310b_chip {
+ char version[KB3310B_VERSION_LEN];
+};
+
+#define KB3310B_SCI_IRQ_NUM 0x0A
+
+/*
+ * The following registers are determined by the EC index configuration.
+ * 1, fill the PORT_HIGH as EC register high part.
+ * 2, fill the PORT_LOW as EC register low part.
+ * 3, fill the PORT_DATA as EC register write data or get the data from it.
+ */
+#define KB3310B_IO_PORT_HIGH 0x0381
+#define KB3310B_IO_PORT_LOW 0x0382
+#define KB3310B_IO_PORT_DATA 0x0383
+
+/*
+ * EC delay time is 500us for register and status access
+ */
+#define KB3310B_REG_UDELAY 500
+#define KB3310B_CMD_TIMEOUT 0x1000
+
+/*
+ * EC access port for SCI communication
+ */
+#define KB3310B_CMD_PORT 0x66
+#define KB3310B_STS_PORT 0x66
+#define KB3310B_DAT_PORT 0x62
+#define KB3310B_CMD_INIT_IDLE_MODE 0xdd
+#define KB3310B_CMD_EXIT_IDLE_MODE 0xdf
+#define KB3310B_CMD_INIT_RESET_MODE 0xd8
+#define KB3310B_CMD_REBOOT_SYSTEM 0x8c
+#define KB3310B_CMD_GET_EVENT_NUM 0x84
+#define KB3310B_CMD_PROGRAM_PIECE 0xda
+
+/* temperature & fan registers */
+#define KB3310B_REG_TEMPERATURE_VALUE 0xF458
+#define KB3310B_REG_FAN_AUTO_MAN_SWITCH 0xF459
+#define KB3310B_BIT_FAN_AUTO 0
+#define KB3310B_BIT_FAN_MANUAL 1
+#define KB3310B_REG_FAN_CONTROL 0xF4D2
+#define KB3310B_BIT_FAN_CONTROL_ON (1 << 0)
+#define KB3310B_BIT_FAN_CONTROL_OFF (0 << 0)
+#define KB3310B_REG_FAN_STATUS 0xF4DA
+#define KB3310B_BIT_FAN_STATUS_ON (1 << 0)
+#define KB3310B_BIT_FAN_STATUS_OFF (0 << 0)
+#define KB3310B_REG_FAN_SPEED_HIGH 0xFE22
+#define KB3310B_REG_FAN_SPEED_LOW 0xFE23
+#define KB3310B_REG_FAN_SPEED_LEVEL 0xF4CC
+
+/* fan speed divider */
+#define KB3310B_FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
+
+/* battery registers */
+#define KB3310B_REG_BAT_DESIGN_CAP_HIGH 0xF77D
+#define KB3310B_REG_BAT_DESIGN_CAP_LOW 0xF77E
+#define KB3310B_REG_BAT_FULLCHG_CAP_HIGH 0xF780
+#define KB3310B_REG_BAT_FULLCHG_CAP_LOW 0xF781
+#define KB3310B_REG_BAT_DESIGN_VOL_HIGH 0xF782
+#define KB3310B_REG_BAT_DESIGN_VOL_LOW 0xF783
+#define KB3310B_REG_BAT_CURRENT_HIGH 0xF784
+#define KB3310B_REG_BAT_CURRENT_LOW 0xF785
+#define KB3310B_REG_BAT_VOLTAGE_HIGH 0xF786
+#define KB3310B_REG_BAT_VOLTAGE_LOW 0xF787
+#define KB3310B_REG_BAT_TEMPERATURE_HIGH 0xF788
+#define KB3310B_REG_BAT_TEMPERATURE_LOW 0xF789
+#define KB3310B_REG_BAT_RELATIVE_CAP_HIGH 0xF492
+#define KB3310B_REG_BAT_RELATIVE_CAP_LOW 0xF493
+#define KB3310B_REG_BAT_VENDOR 0xF4C4
+#define KB3310B_FLAG_BAT_VENDOR_SANYO 0x01
+#define KB3310B_FLAG_BAT_VENDOR_SIMPLO 0x02
+#define KB3310B_REG_BAT_CELL_COUNT 0xF4C6
+#define KB3310B_FLAG_BAT_CELL_3S1P 0x03
+#define KB3310B_FLAG_BAT_CELL_3S2P 0x06
+#define KB3310B_REG_BAT_CHARGE 0xF4A2
+#define KB3310B_FLAG_BAT_CHARGE_DISCHARGE 0x01
+#define KB3310B_FLAG_BAT_CHARGE_CHARGE 0x02
+#define KB3310B_FLAG_BAT_CHARGE_ACPOWER 0x00
+#define KB3310B_REG_BAT_STATUS 0xF4B0
+#define KB3310B_BIT_BAT_STATUS_LOW (1 << 5)
+#define KB3310B_BIT_BAT_STATUS_DESTROY (1 << 2)
+#define KB3310B_BIT_BAT_STATUS_FULL (1 << 1)
+#define KB3310B_BIT_BAT_STATUS_IN (1 << 0)
+#define KB3310B_REG_BAT_CHARGE_STATUS 0xF4B1
+#define KB3310B_BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
+#define KB3310B_BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
+#define KB3310B_REG_BAT_STATE 0xF482
+#define KB3310B_BIT_BAT_STATE_CHARGING (1 << 1)
+#define KB3310B_BIT_BAT_STATE_DISCHARGING (1 << 0)
+#define KB3310B_REG_BAT_POWER 0xF440
+#define KB3310B_BIT_BAT_POWER_S3 (1 << 2)
+#define KB3310B_BIT_BAT_POWER_ON (1 << 1)
+#define KB3310B_BIT_BAT_POWER_ACIN (1 << 0)
+
+/* other registers */
+
+/* Audio: rd/wr */
+#define KB3310B_REG_AUDIO_VOLUME 0xF46C
+#define KB3310B_REG_AUDIO_MUTE 0xF4E7
+#define KB3310B_REG_AUDIO_BEEP 0xF4D0
+
+/* USB port power or not: rd/wr */
+#define KB3310B_REG_USB0_FLAG 0xF461
+#define KB3310B_REG_USB1_FLAG 0xF462
+#define KB3310B_REG_USB2_FLAG 0xF463
+#define KB3310B_BIT_USB_FLAG_ON 1
+#define KB3310B_BIT_USB_FLAG_OFF 0
+
+/* LID */
+#define KB3310B_REG_LID_DETECT 0xF4BD
+#define KB3310B_BIT_LID_DETECT_ON 1
+#define KB3310B_BIT_LID_DETECT_OFF 0
+
+/* CRT */
+#define KB3310B_REG_CRT_DETECT 0xF4AD
+#define KB3310B_BIT_CRT_DETECT_PLUG 1
+#define KB3310B_BIT_CRT_DETECT_UNPLUG 0
+
+/* LCD backlight brightness adjust: 9 levels */
+#define KB3310B_REG_DISPLAY_BRIGHTNESS 0xF4F5
+
+/* Black screen status */
+#define KB3310B_REG_DISPLAY_LCD 0xF79F
+#define KB3310B_BIT_DISPLAY_LCD_ON 1
+#define KB3310B_BIT_DISPLAY_LCD_OFF 0
+
+/* LCD backlight control: off/restore */
+#define KB3310B_REG_BACKLIGHT_CTRL 0xF7BD
+#define KB3310B_BIT_BACKLIGHT_ON 1
+#define KB3310B_BIT_BACKLIGHT_OFF 0
+
+/* Reset the machine auto-clear: rd/wr */
+#define KB3310B_REG_RESET 0xF4EC
+#define KB3310B_BIT_RESET_ON 1
+
+/* Light the LED: rd/wr */
+#define KB3310B_REG_LED 0xF4C8
+#define KB3310B_BIT_LED_RED_POWER (1 << 0)
+#define KB3310B_BIT_LED_ORANGE_POWER (1 << 1)
+#define KB3310B_BIT_LED_GREEN_CHARGE (1 << 2)
+#define KB3310B_BIT_LED_RED_CHARGE (1 << 3)
+#define KB3310B_BIT_LED_NUMLOCK (1 << 4)
+
+/* Test LED mode, all LED on/off */
+#define KB3310B_REG_LED_TEST 0xF4C2
+#define KB3310B_BIT_LED_TEST_IN 1
+#define KB3310B_BIT_LED_TEST_OUT 0
+
+/* Camera on/off */
+#define KB3310B_REG_CAMERA_STATUS 0xF46A
+#define KB3310B_BIT_CAMERA_STATUS_ON 1
+#define KB3310B_BIT_CAMERA_STATUS_OFF 0
+#define KB3310B_REG_CAMERA_CONTROL 0xF7B7
+#define KB3310B_BIT_CAMERA_CONTROL_OFF 0
+#define KB3310B_BIT_CAMERA_CONTROL_ON 1
+
+/* WLAN Status */
+#define KB3310B_REG_WLAN 0xF4FA
+#define KB3310B_BIT_WLAN_ON 1
+#define KB3310B_BIT_WLAN_OFF 0
+
+/* SCI Event Number from EC */
+enum {
+ KB3310B_EVENT_START = 0x22,
+ KB3310B_EVENT_LID = 0x23, /* LID open/close */
+ KB3310B_EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */
+ KB3310B_EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
+ KB3310B_EVENT_OVERTEMP, /* Over-temperature occurred */
+ KB3310B_EVENT_CRT_DETECT, /* CRT is connected */
+ KB3310B_EVENT_CAMERA, /* Camera on/off */
+ KB3310B_EVENT_USB_OC2, /* USB2 Overcurrent occurred */
+ KB3310B_EVENT_USB_OC0, /* USB0 Overcurrent occurred */
+ KB3310B_EVENT_BLACK_SCREEN, /* Turn on/off backlight */
+ KB3310B_EVENT_AUDIO_MUTE, /* Mute on/off */
+ KB3310B_EVENT_DISPLAY_BRIGHTNESS, /* LCD backlight brightness adjust */
+ KB3310B_EVENT_AC_BAT, /* AC & Battery relative issue */
+ KB3310B_EVENT_AUDIO_VOLUME, /* Volume adjust */
+ KB3310B_EVENT_WLAN, /* WLAN on/off */
+ KB3310B_EVENT_END
+};
+
+#endif /* !__LINUX_MFD_YEELOONG_KB3310B_H */
Lemote Yeeloong is a laptop powered by Loongson 2F MIPS processor, primarily a demo platform for hobbyists and developers. It uses an ENE KB3310B Embedded Controller with customized firmware to implement hardware and power management. A monolithic platform driver code for those functionality has existed out-of-tree for many years. This commit creates a MFD driver for the EC chip on Yeeloong laptop to isolate EC-related code from core MIPS code, and serves as the foundation of various subdrivers. My original attempt was to create a regmap for subdrivers to access the EC, unfortunately, the board files in Linux/MIPS still needs to access the EC directly for power management. Unless we find a better home for those code, we simply export the EC-related functions. Signed-off-by: Yifeng Li <tomli@tomli.me> --- MAINTAINERS | 7 + drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 1 + drivers/mfd/yeeloong_kb3310b.c | 206 ++++++++++++++++++++++++++ include/linux/mfd/yeeloong_kb3310b.h | 211 +++++++++++++++++++++++++++ 5 files changed, 435 insertions(+) create mode 100644 drivers/mfd/yeeloong_kb3310b.c create mode 100644 include/linux/mfd/yeeloong_kb3310b.h