@@ -1,4 +1,4 @@
-obj-$(CONFIG_INGENIC_CGU_COMMON) += cgu.o
+obj-$(CONFIG_INGENIC_CGU_COMMON) += cgu.o pm.o
obj-$(CONFIG_INGENIC_CGU_JZ4740) += jz4740-cgu.o
obj-$(CONFIG_INGENIC_CGU_JZ4725B) += jz4725b-cgu.o
obj-$(CONFIG_INGENIC_CGU_JZ4770) += jz4770-cgu.o
@@ -10,6 +10,7 @@
#include <linux/of.h>
#include <dt-bindings/clock/jz4725b-cgu.h>
#include "cgu.h"
+#include "pm.h"
/* CGU register offsets */
#define CGU_REG_CPCCR 0x00
@@ -220,5 +221,7 @@ static void __init jz4725b_cgu_init(struct device_node *np)
retval = ingenic_cgu_register_clocks(cgu);
if (retval)
pr_err("%s: failed to register CGU Clocks\n", __func__);
+
+ ingenic_cgu_register_syscore_ops(cgu);
}
CLK_OF_DECLARE(jz4725b_cgu, "ingenic,jz4725b-cgu", jz4725b_cgu_init);
@@ -20,6 +20,7 @@
#include <dt-bindings/clock/jz4740-cgu.h>
#include <asm/mach-jz4740/clock.h>
#include "cgu.h"
+#include "pm.h"
/* CGU register offsets */
#define CGU_REG_CPCCR 0x00
@@ -226,6 +227,8 @@ static void __init jz4740_cgu_init(struct device_node *np)
retval = ingenic_cgu_register_clocks(cgu);
if (retval)
pr_err("%s: failed to register CGU Clocks\n", __func__);
+
+ ingenic_cgu_register_syscore_ops(cgu);
}
CLK_OF_DECLARE(jz4740_cgu, "ingenic,jz4740-cgu", jz4740_cgu_init);
@@ -7,9 +7,9 @@
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/of.h>
-#include <linux/syscore_ops.h>
#include <dt-bindings/clock/jz4770-cgu.h>
#include "cgu.h"
+#include "pm.h"
/*
* CPM registers offset address definition
@@ -36,9 +36,6 @@
#define CGU_REG_MSC2CDR 0xA8
#define CGU_REG_BCHCDR 0xAC
-/* bits within the LCR register */
-#define LCR_LPM BIT(0) /* Low Power Mode */
-
/* bits within the OPCR register */
#define OPCR_SPENDH BIT(5) /* UHC PHY suspend */
@@ -405,30 +402,6 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
},
};
-#if IS_ENABLED(CONFIG_PM_SLEEP)
-static int jz4770_cgu_pm_suspend(void)
-{
- u32 val;
-
- val = readl(cgu->base + CGU_REG_LCR);
- writel(val | LCR_LPM, cgu->base + CGU_REG_LCR);
- return 0;
-}
-
-static void jz4770_cgu_pm_resume(void)
-{
- u32 val;
-
- val = readl(cgu->base + CGU_REG_LCR);
- writel(val & ~LCR_LPM, cgu->base + CGU_REG_LCR);
-}
-
-static struct syscore_ops jz4770_cgu_pm_ops = {
- .suspend = jz4770_cgu_pm_suspend,
- .resume = jz4770_cgu_pm_resume,
-};
-#endif /* CONFIG_PM_SLEEP */
-
static void __init jz4770_cgu_init(struct device_node *np)
{
int retval;
@@ -442,9 +415,7 @@ static void __init jz4770_cgu_init(struct device_node *np)
if (retval)
pr_err("%s: failed to register CGU Clocks\n", __func__);
-#if IS_ENABLED(CONFIG_PM_SLEEP)
- register_syscore_ops(&jz4770_cgu_pm_ops);
-#endif
+ ingenic_cgu_register_syscore_ops(cgu);
}
/* We only probe via devicetree, no need for a platform driver */
@@ -19,6 +19,7 @@
#include <linux/of.h>
#include <dt-bindings/clock/jz4780-cgu.h>
#include "cgu.h"
+#include "pm.h"
/* CGU register offsets */
#define CGU_REG_CLOCKCONTROL 0x00
@@ -728,5 +729,7 @@ static void __init jz4780_cgu_init(struct device_node *np)
pr_err("%s: failed to register CGU Clocks\n", __func__);
return;
}
+
+ ingenic_cgu_register_syscore_ops(cgu);
}
CLK_OF_DECLARE(jz4780_cgu, "ingenic,jz4780-cgu", jz4780_cgu_init);
new file mode 100644
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include "cgu.h"
+#include "pm.h"
+
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#define CGU_REG_LCR 0x04
+
+#define LCR_LOW_POWER_MODE BIT(0)
+
+static void __iomem * __maybe_unused ingenic_cgu_base;
+
+static int __maybe_unused ingenic_cgu_pm_suspend(void)
+{
+ u32 val = readl(ingenic_cgu_base + CGU_REG_LCR);
+
+ writel(val | LCR_LOW_POWER_MODE, ingenic_cgu_base + CGU_REG_LCR);
+
+ return 0;
+}
+
+static void __maybe_unused ingenic_cgu_pm_resume(void)
+{
+ u32 val = readl(ingenic_cgu_base + CGU_REG_LCR);
+
+ writel(val & ~LCR_LOW_POWER_MODE, ingenic_cgu_base + CGU_REG_LCR);
+}
+
+static struct syscore_ops __maybe_unused ingenic_cgu_pm_ops = {
+ .suspend = ingenic_cgu_pm_suspend,
+ .resume = ingenic_cgu_pm_resume,
+};
+
+void ingenic_cgu_register_syscore_ops(struct ingenic_cgu *cgu)
+{
+ if (IS_ENABLED(CONFIG_PM_SLEEP)) {
+ ingenic_cgu_base = cgu->base;
+ register_syscore_ops(&ingenic_cgu_pm_ops);
+ }
+}
new file mode 100644
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
+ */
+#ifndef DRIVERS_CLK_INGENIC_PM_H
+#define DRIVERS_CLK_INGENIC_PM_H
+
+struct ingenic_cgu;
+
+void ingenic_cgu_register_syscore_ops(struct ingenic_cgu *cgu);
+
+#endif /* DRIVERS_CLK_INGENIC_PM_H */
The Low-Power Mode, when enabled, will make the "wait" MIPS instruction suspend the system. This is not really clock-related, but this bit happens to be in the register set of the CGU. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/clk/ingenic/Makefile | 2 +- drivers/clk/ingenic/jz4725b-cgu.c | 3 +++ drivers/clk/ingenic/jz4740-cgu.c | 3 +++ drivers/clk/ingenic/jz4770-cgu.c | 33 ++--------------------- drivers/clk/ingenic/jz4780-cgu.c | 3 +++ drivers/clk/ingenic/pm.c | 45 +++++++++++++++++++++++++++++++ drivers/clk/ingenic/pm.h | 12 +++++++++ 7 files changed, 69 insertions(+), 32 deletions(-) create mode 100644 drivers/clk/ingenic/pm.c create mode 100644 drivers/clk/ingenic/pm.h