| Message ID | 20190527091323.4582-3-sr@denx.de (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [1/8,v2] MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier | expand |
Hello, Stefan Roese wrote: > Now that pinmux is available, let's use it for the UART DT nodes. > > Signed-off-by: Stefan Roese <sr@denx.de> > Cc: Paul Burton <paul.burton@mips.com> > Cc: Harvey Hunt <harveyhuntnexus@gmail.com> > Cc: John Crispin <john@phrozen.org> Applied to mips-next. Thanks, Paul [ This message was auto-generated; if you believe anything is incorrect then please email paul.burton@mips.com to report it. ]
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi index d87f53bd6d72..a239a2405670 100644 --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi @@ -161,6 +161,9 @@ compatible = "ns16550a"; reg = <0xc00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart0_uart>; + resets = <&resetc 12>; reset-names = "uart0"; @@ -174,6 +177,9 @@ compatible = "ns16550a"; reg = <0xd00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart1_uart>; + resets = <&resetc 19>; reset-names = "uart1"; @@ -187,6 +193,9 @@ compatible = "ns16550a"; reg = <0xe00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart2_uart>; + resets = <&resetc 20>; reset-names = "uart2";
Now that pinmux is available, let's use it for the UART DT nodes. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Paul Burton <paul.burton@mips.com> Cc: Harvey Hunt <harveyhuntnexus@gmail.com> Cc: John Crispin <john@phrozen.org> --- v2: - Use Harvey's new email address (not at imgtec) - Use correct linux-mips list address arch/mips/boot/dts/ralink/mt7628a.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)