diff mbox series

[8/8,v2] MIPS: ralink: Add GARDENA smart Gateway MT7688 board

Message ID 20190527091323.4582-8-sr@denx.de (mailing list archive)
State Superseded
Headers show
Series [1/8,v2] MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier | expand

Commit Message

Stefan Roese May 27, 2019, 9:13 a.m. UTC
This patch adds support for the GARDENA smart Gateway, which is based on
the MediaTek MT7688 SoC. It is equipped with 128 MiB of DDR and 8 MiB of
flash (SPI NOR) and additional 128MiB SPI NAND storage.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: John Crispin <john@phrozen.org>
---
v2:
- Use Harvey's new email address (not at imgtec)
- Use correct linux-mips list address

 .../ralink/gardena_smart_gateway_mt7688.dts   | 196 ++++++++++++++++++
 1 file changed, 196 insertions(+)
 create mode 100644 arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts

Comments

Paul Burton June 24, 2019, 9:30 p.m. UTC | #1
Hi Stefan,

On Mon, May 27, 2019 at 11:13:23AM +0200, Stefan Roese wrote:
> This patch adds support for the GARDENA smart Gateway, which is based on
> the MediaTek MT7688 SoC. It is equipped with 128 MiB of DDR and 8 MiB of
> flash (SPI NOR) and additional 128MiB SPI NAND storage.
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Paul Burton <paul.burton@mips.com>
> Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
> Cc: John Crispin <john@phrozen.org>
> ---
> v2:
> - Use Harvey's new email address (not at imgtec)
> - Use correct linux-mips list address
> 
>  .../ralink/gardena_smart_gateway_mt7688.dts   | 196 ++++++++++++++++++
>  1 file changed, 196 insertions(+)
>  create mode 100644 arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts

Thanks for the patch - this one sees checkpatch complain about the
Gardena DT vendor prefix being undocumented, as well as the board
compatible string:

WARNING: DT compatible string "Gardena,smartGatewayMT7688" appears un-documented -- check ./Documentation/devicetree/bindings/
#40: FILE: arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts:14:
+       compatible = "Gardena,smartGatewayMT7688", "ralink,mt7628a-soc";

WARNING: DT compatible string vendor "Gardena" appears un-documented -- check ./Documentation/devicetree/bindings/vendor-prefixes.yaml
#40: FILE: arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts:14:
+       compatible = "Gardena,smartGatewayMT7688", "ralink,mt7628a-soc";

Could you add the entry to
Documentation/devicetree/bindings/vendor-prefixes.yaml & a short
description of the board somewhere like
Documentation/devicetree/bindings/mips/ralink/gardena.txt?

Thanks,
    Paul
Stefan Roese June 25, 2019, 5:31 a.m. UTC | #2
Hi Paul,

On 24.06.19 23:30, Paul Burton wrote:
> On Mon, May 27, 2019 at 11:13:23AM +0200, Stefan Roese wrote:
>> This patch adds support for the GARDENA smart Gateway, which is based on
>> the MediaTek MT7688 SoC. It is equipped with 128 MiB of DDR and 8 MiB of
>> flash (SPI NOR) and additional 128MiB SPI NAND storage.
>>
>> Signed-off-by: Stefan Roese <sr@denx.de>
>> Cc: Paul Burton <paul.burton@mips.com>
>> Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
>> Cc: John Crispin <john@phrozen.org>
>> ---
>> v2:
>> - Use Harvey's new email address (not at imgtec)
>> - Use correct linux-mips list address
>>
>>   .../ralink/gardena_smart_gateway_mt7688.dts   | 196 ++++++++++++++++++
>>   1 file changed, 196 insertions(+)
>>   create mode 100644 arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
> 
> Thanks for the patch - this one sees checkpatch complain about the
> Gardena DT vendor prefix being undocumented, as well as the board
> compatible string:
> 
> WARNING: DT compatible string "Gardena,smartGatewayMT7688" appears un-documented -- check ./Documentation/devicetree/bindings/
> #40: FILE: arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts:14:
> +       compatible = "Gardena,smartGatewayMT7688", "ralink,mt7628a-soc";
> 
> WARNING: DT compatible string vendor "Gardena" appears un-documented -- check ./Documentation/devicetree/bindings/vendor-prefixes.yaml
> #40: FILE: arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts:14:
> +       compatible = "Gardena,smartGatewayMT7688", "ralink,mt7628a-soc";
> 
> Could you add the entry to
> Documentation/devicetree/bindings/vendor-prefixes.yaml & a short
> description of the board somewhere like
> Documentation/devicetree/bindings/mips/ralink/gardena.txt?

Sure, I'll send a new version of this patch with these additions.

Thanks,
Stefan
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
new file mode 100644
index 000000000000..f13d1e45ebbb
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -0,0 +1,196 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Stefan Roese <sr@denx.de>
+ */
+
+/dts-v1/;
+
+/include/ "mt7628a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "Gardena,smartGatewayMT7688", "ralink,mt7628a-soc";
+	model = "GARDENA smart Gateway (MT7688)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_gpio_gpio>;	/* GPIO11 */
+
+		user_btn1 {
+			label = "USER_BTN1";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code =<KEY_PROG1> ;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_pwm0_gpio>,	/* GPIO18 */
+			    <&pinmux_pwm1_gpio>,	/* GPIO19 */
+			    <&pinmux_sdmode_gpio>,	/* GPIO22..29 */
+			    <&pinmux_p0led_an_gpio>;	/* GPIO43 */
+		/*
+		 * <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as
+		 * well for GPIO3. But this is already claimed for uart1
+		 * (see below). So we can't include it in this LED node.
+		 */
+
+		power_blue {
+			label = "smartgw:power:blue";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_green {
+			label = "smartgw:power:green";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_red {
+			label = "smartgw:power:red";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_blue {
+			label = "smartgw:radio:blue";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_green {
+			label = "smartgw:radio:green";
+			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_red {
+			label = "smartgw:radio:red";
+			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_blue {
+			label = "smartgw:internet:blue";
+			gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_green {
+			label = "smartgw:internet:green";
+			gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_red {
+			label = "smartgw:internet:red";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		ethernet_link {
+			label = "smartgw:eth:link";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+
+		ethernet_activity {
+			label = "smartgw:eth:act";
+			gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&i2c {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0xa0000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "uboot_env0";
+				reg = <0xa0000 0x10000>;
+			};
+
+			partition@b0000 {
+				label = "uboot_env1";
+				reg = <0xb0000 0x10000>;
+			};
+
+			factory: partition@c0000 {
+				label = "factory";
+				reg = <0xc0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+
+	nand_flash@1 {
+		compatible = "spi-nand";
+		linux,mtd-name = "gd5f";
+		reg = <1>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2s_gpio>;		/* GPIO0..3 */
+
+	rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_p2led_an_gpio>,	/* GPIO41 */
+		    <&pinmux_p3led_an_gpio>;	/* GPIO40 */
+
+	rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
+
+&watchdog {
+	status = "okay";
+};