@@ -73,6 +73,7 @@ config ARM
select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
select HAVE_EXIT_THREAD
+ select HAVE_FAST_GUP if ARM_LPAE
select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
select HAVE_FUNCTION_TRACER if !XIP_KERNEL
@@ -1596,10 +1597,6 @@ config ARCH_SELECT_MEMORY_MODEL
config HAVE_ARCH_PFN_VALID
def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
-config HAVE_GENERIC_GUP
- def_bool y
- depends on ARM_LPAE
-
config HIGHMEM
bool "High Memory Support"
depends on MMU
@@ -140,6 +140,7 @@ config ARM64
select HAVE_DMA_CONTIGUOUS
select HAVE_DYNAMIC_FTRACE
select HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select HAVE_FAST_GUP
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
@@ -262,9 +263,6 @@ config GENERIC_CALIBRATE_DELAY
config ZONE_DMA32
def_bool y
-config HAVE_GENERIC_GUP
- def_bool y
-
config ARCH_ENABLE_MEMORY_HOTPLUG
def_bool y
@@ -54,10 +54,10 @@ config MIPS
select HAVE_DMA_CONTIGUOUS
select HAVE_DYNAMIC_FTRACE
select HAVE_EXIT_THREAD
+ select HAVE_FAST_GUP
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
- select HAVE_GENERIC_GUP
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
@@ -185,12 +185,12 @@ config PPC
select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL
select HAVE_EBPF_JIT if PPC64
select HAVE_EFFICIENT_UNALIGNED_ACCESS if !(CPU_LITTLE_ENDIAN && POWER7_CPU)
+ select HAVE_FAST_GUP
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_ERROR_INJECTION
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select HAVE_GCC_PLUGINS if GCC_VERSION >= 50200 # plugin support on gcc <= 5.1 is buggy on PPC
- select HAVE_GENERIC_GUP
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
select HAVE_IDE
select HAVE_IOREMAP_PROT
@@ -137,6 +137,7 @@ config S390
select HAVE_DMA_CONTIGUOUS
select HAVE_DYNAMIC_FTRACE
select HAVE_DYNAMIC_FTRACE_WITH_REGS
+ select HAVE_FAST_GUP
select HAVE_EFFICIENT_UNALIGNED_ACCESS
select HAVE_FENTRY
select HAVE_FTRACE_MCOUNT_RECORD
@@ -144,7 +145,6 @@ config S390
select HAVE_FUNCTION_TRACER
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_GCC_PLUGINS
- select HAVE_GENERIC_GUP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZ4
@@ -14,7 +14,7 @@ config SUPERH
select HAVE_ARCH_TRACEHOOK
select HAVE_PERF_EVENTS
select HAVE_DEBUG_BUGVERBOSE
- select HAVE_GENERIC_GUP
+ select HAVE_FAST_GUP
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
select ARCH_HAS_GCOV_PROFILE_ALL
@@ -28,7 +28,7 @@ config SPARC
select RTC_DRV_M48T59
select RTC_SYSTOHC
select HAVE_ARCH_JUMP_LABEL if SPARC64
- select HAVE_GENERIC_GUP if SPARC64
+ select HAVE_FAST_GUP if SPARC64
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_PCI_IOMAP
@@ -157,6 +157,7 @@ config X86
select HAVE_EFFICIENT_UNALIGNED_ACCESS
select HAVE_EISA
select HAVE_EXIT_THREAD
+ select HAVE_FAST_GUP
select HAVE_FENTRY if X86_64 || DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
@@ -2874,9 +2875,6 @@ config HAVE_ATOMIC_IOMAP
config X86_DEV_DMA_OPS
bool
-config HAVE_GENERIC_GUP
- def_bool y
-
source "drivers/firmware/Kconfig"
source "arch/x86/kvm/Kconfig"
@@ -132,7 +132,7 @@ config HAVE_MEMBLOCK_NODE_MAP
config HAVE_MEMBLOCK_PHYS_MAP
bool
-config HAVE_GENERIC_GUP
+config HAVE_FAST_GUP
bool
config ARCH_KEEP_MEMBLOCK
@@ -1650,7 +1650,7 @@ struct page *get_dump_page(unsigned long addr)
#endif /* CONFIG_ELF_CORE */
/*
- * Generic Fast GUP
+ * Fast GUP
*
* get_user_pages_fast attempts to pin user pages by walking the page
* tables directly and avoids taking locks. Thus the walker needs to be
@@ -1682,7 +1682,7 @@ struct page *get_dump_page(unsigned long addr)
*
* This code is based heavily on the PowerPC implementation by Nick Piggin.
*/
-#ifdef CONFIG_HAVE_GENERIC_GUP
+#ifdef CONFIG_HAVE_FAST_GUP
#ifdef CONFIG_GUP_GET_PTE_LOW_HIGH
/*
* WARNING: only to be used in the get_user_pages_fast() implementation.
We only support the generic GUP now, so rename the config option to be more clear, and always use the mm/Kconfig definition of the symbol and select it from the arch Kconfigs. Signed-off-by: Christoph Hellwig <hch@lst.de> --- arch/arm/Kconfig | 5 +---- arch/arm64/Kconfig | 4 +--- arch/mips/Kconfig | 2 +- arch/powerpc/Kconfig | 2 +- arch/s390/Kconfig | 2 +- arch/sh/Kconfig | 2 +- arch/sparc/Kconfig | 2 +- arch/x86/Kconfig | 4 +--- mm/Kconfig | 2 +- mm/gup.c | 4 ++-- 10 files changed, 11 insertions(+), 18 deletions(-)