diff mbox series

[v13,05/13] clk: ingenic: Add driver for the TCU clocks

Message ID 20190624225759.18299-6-paul@crapouillou.net (mailing list archive)
State Superseded
Headers show
Series Ingenic Timer/Counter Unit patchset v13 | expand

Commit Message

Paul Cercueil June 24, 2019, 10:57 p.m. UTC
Add driver to support the clocks provided by the Timer/Counter Unit
(TCU) of the JZ47xx SoCs from Ingenic.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---

Notes:
    v12: New patch
    
    v13:
     - Don't enable/disable the TCU clock on demand. Enable it in the probe
       and call it a day.
     - Register suspend callbacks to gate/ungate the TCU clock on
       suspend/resume.
     - Use pr_fmt and pr_crit instead of custom TCU_ERR() macro
     - Remove useless dependency on COMMON_CLK in Kconfig
     - Remove registration of clkdev

 drivers/clk/ingenic/Kconfig  |  10 +-
 drivers/clk/ingenic/Makefile |   1 +
 drivers/clk/ingenic/tcu.c    | 473 +++++++++++++++++++++++++++++++++++
 3 files changed, 483 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/ingenic/tcu.c

Comments

Stephen Boyd June 25, 2019, 10:09 p.m. UTC | #1
Quoting Paul Cercueil (2019-06-24 15:57:51)
> diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
> new file mode 100644
> index 000000000000..6d667c4a2bd5
> --- /dev/null
> +++ b/drivers/clk/ingenic/tcu.c
> @@ -0,0 +1,473 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * JZ47xx SoCs TCU clocks driver
> + * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clockchips.h>
> +#include <linux/mfd/ingenic-tcu.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/syscore_ops.h>
> +
> +#include <dt-bindings/clock/ingenic,tcu.h>
> +
[...]
> +
> +static const struct ingenic_soc_info jz4740_soc_info = {
> +       .num_channels = 8,
> +       .has_ost = false,
> +       .has_tcu_clk = true,
> +};
> +
> +static const struct ingenic_soc_info jz4725b_soc_info = {
> +       .num_channels = 6,
> +       .has_ost = true,
> +       .has_tcu_clk = true,
> +};
> +
> +static const struct ingenic_soc_info jz4770_soc_info = {
> +       .num_channels = 8,
> +       .has_ost = true,
> +       .has_tcu_clk = false,
> +};
> +
> +static const struct of_device_id ingenic_tcu_of_match[] __initconst = {
> +       { .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
> +       { .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
> +       { .compatible = "ingenic,jz4770-tcu", .data = &jz4770_soc_info, },
> +       { }
> +};
> +
> +static int __init ingenic_tcu_probe(struct device_node *np)
> +{
> +       const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
> +       struct ingenic_tcu *tcu;
> +       struct regmap *map;
> +       unsigned int i;
> +       int ret;
> +
> +       map = ingenic_tcu_get_regmap(np);
> +       if (IS_ERR(map))
> +               return PTR_ERR(map);
> +
> +       tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
> +       if (!tcu)
> +               return -ENOMEM;
> +
> +       tcu->map = map;
> +       tcu->soc_info = id->data;
> +
> +       if (tcu->soc_info->has_tcu_clk) {
> +               tcu->clk = of_clk_get_by_name(np, "tcu");

Do you need to get the clk by name? Or can that clk be "known" to the
TCU somehow so we can already have a direct clk pointer?

> +               if (IS_ERR(tcu->clk)) {
> +                       ret = PTR_ERR(tcu->clk);
> +                       pr_crit("Cannot get TCU clock\n");
> +                       goto err_free_tcu;
> +               }
> +
> +               ret = clk_prepare_enable(tcu->clk);
> +               if (ret) {
> +                       pr_crit("Unable to enable TCU clock\n");
> +                       goto err_put_clk;
> +               }
> +       }
> +
> +       tcu->clocks = kzalloc(sizeof(*tcu->clocks) +
> +                             sizeof(*tcu->clocks->hws) * TCU_CLK_COUNT,
> +                             GFP_KERNEL);
> +       if (!tcu->clocks) {
> +               ret = -ENOMEM;
> +               goto err_clk_disable;
> +       }
> +
> +       tcu->clocks->num = TCU_CLK_COUNT;
> +
> +       for (i = 0; i < tcu->soc_info->num_channels; i++) {
> +               ret = ingenic_tcu_register_clock(tcu, i, TCU_PARENT_EXT,
> +                                                &ingenic_tcu_clk_info[i],
> +                                                tcu->clocks);
> +               if (ret) {
> +                       pr_crit("cannot register clock %i\n", i);
> +                       goto err_unregister_timer_clocks;
> +               }
> +       }
> +
> +       /*
> +        * We set EXT as the default parent clock for all the TCU clocks
> +        * except for the watchdog one, where we set the RTC clock as the
> +        * parent. Since the EXT and PCLK are much faster than the RTC clock,
> +        * the watchdog would kick after a maximum time of 5s, and we might
> +        * want a slower kicking time.
> +        */
> +       ret = ingenic_tcu_register_clock(tcu, TCU_CLK_WDT, TCU_PARENT_RTC,
> +                                        &ingenic_tcu_watchdog_clk_info,
> +                                        tcu->clocks);
> +       if (ret) {
> +               pr_crit("cannot register watchdog clock\n");
> +               goto err_unregister_timer_clocks;
> +       }
> +
> +       if (tcu->soc_info->has_ost) {
> +               ret = ingenic_tcu_register_clock(tcu, TCU_CLK_OST,
> +                                                TCU_PARENT_EXT,
> +                                                &ingenic_tcu_ost_clk_info,
> +                                                tcu->clocks);
> +               if (ret) {
> +                       pr_crit("cannot register ost clock\n");
> +                       goto err_unregister_watchdog_clock;
> +               }
> +       }
> +
> +       ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, tcu->clocks);
> +       if (ret) {
> +               pr_crit("cannot add OF clock provider\n");
> +               goto err_unregister_ost_clock;
> +       }
> +
> +       ingenic_tcu = tcu;
> +
> +       return 0;
> +
> +err_unregister_ost_clock:
> +       if (tcu->soc_info->has_ost)
> +               clk_hw_unregister(tcu->clocks->hws[i + 1]);
> +err_unregister_watchdog_clock:
> +       clk_hw_unregister(tcu->clocks->hws[i]);
> +err_unregister_timer_clocks:
> +       for (i = 0; i < tcu->clocks->num; i++)
> +               if (tcu->clocks->hws[i])
> +                       clk_hw_unregister(tcu->clocks->hws[i]);
> +       kfree(tcu->clocks);
> +err_clk_disable:
> +       if (tcu->soc_info->has_tcu_clk)
> +               clk_disable_unprepare(tcu->clk);
> +err_put_clk:
> +       if (tcu->soc_info->has_tcu_clk)
> +               clk_put(tcu->clk);
> +err_free_tcu:
> +       kfree(tcu);
> +       return ret;

Too bad this isn't a device with devm!

> +}
> +
> +static int __maybe_unused tcu_pm_suspend(void)
> +{
> +       struct ingenic_tcu *tcu = ingenic_tcu;
> +
> +       if (tcu->clk)
> +               clk_disable(tcu->clk);

Do you need to unprepare? Or it just isn't possible because this is
called from syscore and thus we can't sleep?

> +
> +       return 0;
> +}
> +
> +static void __maybe_unused tcu_pm_resume(void)
> +{
> +       struct ingenic_tcu *tcu = ingenic_tcu;
> +
> +       if (tcu->clk)
> +               clk_enable(tcu->clk);
> +}
> +
> +static struct syscore_ops __maybe_unused tcu_pm_ops = {
> +       .suspend = tcu_pm_suspend,
> +       .resume = tcu_pm_resume,
> +};
> +
> +static void __init ingenic_tcu_init(struct device_node *np)
> +{
> +       int ret = ingenic_tcu_probe(np);
> +
> +       if (ret)
> +               pr_crit("Failed to initialize TCU clocks: %i\n", ret);

Should be %d instead of %i? Applies to all this file.

> +
> +       if (IS_ENABLED(CONFIG_PM_SLEEP))
> +               register_syscore_ops(&tcu_pm_ops);
> +}
Paul Cercueil June 25, 2019, 10:37 p.m. UTC | #2
Le mer. 26 juin 2019 à 0:09, Stephen Boyd <sboyd@kernel.org> a écrit :
> Quoting Paul Cercueil (2019-06-24 15:57:51)
>>  diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
>>  new file mode 100644
>>  index 000000000000..6d667c4a2bd5
>>  --- /dev/null
>>  +++ b/drivers/clk/ingenic/tcu.c
>>  @@ -0,0 +1,473 @@
>>  +// SPDX-License-Identifier: GPL-2.0
>>  +/*
>>  + * JZ47xx SoCs TCU clocks driver
>>  + * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
>>  + */
>>  +
>>  +#include <linux/clk.h>
>>  +#include <linux/clk-provider.h>
>>  +#include <linux/clockchips.h>
>>  +#include <linux/mfd/ingenic-tcu.h>
>>  +#include <linux/regmap.h>
>>  +#include <linux/slab.h>
>>  +#include <linux/syscore_ops.h>
>>  +
>>  +#include <dt-bindings/clock/ingenic,tcu.h>
>>  +
> [...]
>>  +
>>  +static const struct ingenic_soc_info jz4740_soc_info = {
>>  +       .num_channels = 8,
>>  +       .has_ost = false,
>>  +       .has_tcu_clk = true,
>>  +};
>>  +
>>  +static const struct ingenic_soc_info jz4725b_soc_info = {
>>  +       .num_channels = 6,
>>  +       .has_ost = true,
>>  +       .has_tcu_clk = true,
>>  +};
>>  +
>>  +static const struct ingenic_soc_info jz4770_soc_info = {
>>  +       .num_channels = 8,
>>  +       .has_ost = true,
>>  +       .has_tcu_clk = false,
>>  +};
>>  +
>>  +static const struct of_device_id ingenic_tcu_of_match[] 
>> __initconst = {
>>  +       { .compatible = "ingenic,jz4740-tcu", .data = 
>> &jz4740_soc_info, },
>>  +       { .compatible = "ingenic,jz4725b-tcu", .data = 
>> &jz4725b_soc_info, },
>>  +       { .compatible = "ingenic,jz4770-tcu", .data = 
>> &jz4770_soc_info, },
>>  +       { }
>>  +};
>>  +
>>  +static int __init ingenic_tcu_probe(struct device_node *np)
>>  +{
>>  +       const struct of_device_id *id = 
>> of_match_node(ingenic_tcu_of_match, np);
>>  +       struct ingenic_tcu *tcu;
>>  +       struct regmap *map;
>>  +       unsigned int i;
>>  +       int ret;
>>  +
>>  +       map = ingenic_tcu_get_regmap(np);
>>  +       if (IS_ERR(map))
>>  +               return PTR_ERR(map);
>>  +
>>  +       tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
>>  +       if (!tcu)
>>  +               return -ENOMEM;
>>  +
>>  +       tcu->map = map;
>>  +       tcu->soc_info = id->data;
>>  +
>>  +       if (tcu->soc_info->has_tcu_clk) {
>>  +               tcu->clk = of_clk_get_by_name(np, "tcu");
> 
> Do you need to get the clk by name? Or can that clk be "known" to the
> TCU somehow so we can already have a direct clk pointer?

This clock is provided by a separate driver, so I have to obtain the
clock pointer from devicetree.

> 
>>  +               if (IS_ERR(tcu->clk)) {
>>  +                       ret = PTR_ERR(tcu->clk);
>>  +                       pr_crit("Cannot get TCU clock\n");
>>  +                       goto err_free_tcu;
>>  +               }
>>  +
>>  +               ret = clk_prepare_enable(tcu->clk);
>>  +               if (ret) {
>>  +                       pr_crit("Unable to enable TCU clock\n");
>>  +                       goto err_put_clk;
>>  +               }
>>  +       }
>>  +
>>  +       tcu->clocks = kzalloc(sizeof(*tcu->clocks) +
>>  +                             sizeof(*tcu->clocks->hws) * 
>> TCU_CLK_COUNT,
>>  +                             GFP_KERNEL);
>>  +       if (!tcu->clocks) {
>>  +               ret = -ENOMEM;
>>  +               goto err_clk_disable;
>>  +       }
>>  +
>>  +       tcu->clocks->num = TCU_CLK_COUNT;
>>  +
>>  +       for (i = 0; i < tcu->soc_info->num_channels; i++) {
>>  +               ret = ingenic_tcu_register_clock(tcu, i, 
>> TCU_PARENT_EXT,
>>  +                                                
>> &ingenic_tcu_clk_info[i],
>>  +                                                tcu->clocks);
>>  +               if (ret) {
>>  +                       pr_crit("cannot register clock %i\n", i);
>>  +                       goto err_unregister_timer_clocks;
>>  +               }
>>  +       }
>>  +
>>  +       /*
>>  +        * We set EXT as the default parent clock for all the TCU 
>> clocks
>>  +        * except for the watchdog one, where we set the RTC clock 
>> as the
>>  +        * parent. Since the EXT and PCLK are much faster than the 
>> RTC clock,
>>  +        * the watchdog would kick after a maximum time of 5s, and 
>> we might
>>  +        * want a slower kicking time.
>>  +        */
>>  +       ret = ingenic_tcu_register_clock(tcu, TCU_CLK_WDT, 
>> TCU_PARENT_RTC,
>>  +                                        
>> &ingenic_tcu_watchdog_clk_info,
>>  +                                        tcu->clocks);
>>  +       if (ret) {
>>  +               pr_crit("cannot register watchdog clock\n");
>>  +               goto err_unregister_timer_clocks;
>>  +       }
>>  +
>>  +       if (tcu->soc_info->has_ost) {
>>  +               ret = ingenic_tcu_register_clock(tcu, TCU_CLK_OST,
>>  +                                                TCU_PARENT_EXT,
>>  +                                                
>> &ingenic_tcu_ost_clk_info,
>>  +                                                tcu->clocks);
>>  +               if (ret) {
>>  +                       pr_crit("cannot register ost clock\n");
>>  +                       goto err_unregister_watchdog_clock;
>>  +               }
>>  +       }
>>  +
>>  +       ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, 
>> tcu->clocks);
>>  +       if (ret) {
>>  +               pr_crit("cannot add OF clock provider\n");
>>  +               goto err_unregister_ost_clock;
>>  +       }
>>  +
>>  +       ingenic_tcu = tcu;
>>  +
>>  +       return 0;
>>  +
>>  +err_unregister_ost_clock:
>>  +       if (tcu->soc_info->has_ost)
>>  +               clk_hw_unregister(tcu->clocks->hws[i + 1]);
>>  +err_unregister_watchdog_clock:
>>  +       clk_hw_unregister(tcu->clocks->hws[i]);
>>  +err_unregister_timer_clocks:
>>  +       for (i = 0; i < tcu->clocks->num; i++)
>>  +               if (tcu->clocks->hws[i])
>>  +                       clk_hw_unregister(tcu->clocks->hws[i]);
>>  +       kfree(tcu->clocks);
>>  +err_clk_disable:
>>  +       if (tcu->soc_info->has_tcu_clk)
>>  +               clk_disable_unprepare(tcu->clk);
>>  +err_put_clk:
>>  +       if (tcu->soc_info->has_tcu_clk)
>>  +               clk_put(tcu->clk);
>>  +err_free_tcu:
>>  +       kfree(tcu);
>>  +       return ret;
> 
> Too bad this isn't a device with devm!
> 
>>  +}
>>  +
>>  +static int __maybe_unused tcu_pm_suspend(void)
>>  +{
>>  +       struct ingenic_tcu *tcu = ingenic_tcu;
>>  +
>>  +       if (tcu->clk)
>>  +               clk_disable(tcu->clk);
> 
> Do you need to unprepare? Or it just isn't possible because this is
> called from syscore and thus we can't sleep?

I thought that clk_disable() was enough. We don't actually need to
unprepare, do we? And yes, as you pointed out, this call cannot sleep.

>>  +
>>  +       return 0;
>>  +}
>>  +
>>  +static void __maybe_unused tcu_pm_resume(void)
>>  +{
>>  +       struct ingenic_tcu *tcu = ingenic_tcu;
>>  +
>>  +       if (tcu->clk)
>>  +               clk_enable(tcu->clk);
>>  +}
>>  +
>>  +static struct syscore_ops __maybe_unused tcu_pm_ops = {
>>  +       .suspend = tcu_pm_suspend,
>>  +       .resume = tcu_pm_resume,
>>  +};
>>  +
>>  +static void __init ingenic_tcu_init(struct device_node *np)
>>  +{
>>  +       int ret = ingenic_tcu_probe(np);
>>  +
>>  +       if (ret)
>>  +               pr_crit("Failed to initialize TCU clocks: %i\n", 
>> ret);
> 
> Should be %d instead of %i? Applies to all this file.

OK.

Thanks,
-Paul

>>  +
>>  +       if (IS_ENABLED(CONFIG_PM_SLEEP))
>>  +               register_syscore_ops(&tcu_pm_ops);
>>  +}
Stephen Boyd June 25, 2019, 11:28 p.m. UTC | #3
Quoting Paul Cercueil (2019-06-25 15:37:07)
> > 
> > Do you need to get the clk by name? Or can that clk be "known" to the
> > TCU somehow so we can already have a direct clk pointer?
> 
> This clock is provided by a separate driver, so I have to obtain the
> clock pointer from devicetree.

Ok.

> >>  +}
> >>  +
> >>  +static int __maybe_unused tcu_pm_suspend(void)
> >>  +{
> >>  +       struct ingenic_tcu *tcu = ingenic_tcu;
> >>  +
> >>  +       if (tcu->clk)
> >>  +               clk_disable(tcu->clk);
> > 
> > Do you need to unprepare? Or it just isn't possible because this is
> > called from syscore and thus we can't sleep?
> 
> I thought that clk_disable() was enough. We don't actually need to
> unprepare, do we? And yes, as you pointed out, this call cannot sleep.

Yeah unprepare isn't necessary, but it will be different on different
platforms. This is a highly platform specific driver though so I suspect
this is all fine.
diff mbox series

Patch

diff --git a/drivers/clk/ingenic/Kconfig b/drivers/clk/ingenic/Kconfig
index fe8db93cf21a..0f39c038670f 100644
--- a/drivers/clk/ingenic/Kconfig
+++ b/drivers/clk/ingenic/Kconfig
@@ -1,5 +1,5 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
-menu "Ingenic JZ47xx CGU drivers"
+menu "Ingenic JZ47xx drivers"
 	depends on MIPS
 
 config INGENIC_CGU_COMMON
@@ -45,4 +45,12 @@  config INGENIC_CGU_JZ4780
 
 	  If building for a JZ4780 SoC, you want to say Y here.
 
+config INGENIC_TCU_CLK
+	bool "Ingenic JZ47xx TCU clocks driver"
+	default MACH_INGENIC
+	select INGENIC_TCU
+	help
+	  Support the clocks of the Timer/Counter Unit (TCU) of the Ingenic
+	  JZ47xx SoCs.
+
 endmenu
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index ab58a6a862a5..d25a5801bd8a 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -4,3 +4,4 @@  obj-$(CONFIG_INGENIC_CGU_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4725B)	+= jz4725b-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4780)	+= jz4780-cgu.o
+obj-$(CONFIG_INGENIC_TCU_CLK)		+= tcu.o
diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
new file mode 100644
index 000000000000..6d667c4a2bd5
--- /dev/null
+++ b/drivers/clk/ingenic/tcu.c
@@ -0,0 +1,473 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU clocks driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clockchips.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/* 8 channels max + watchdog + OST */
+#define TCU_CLK_COUNT	10
+
+#undef pr_fmt
+#define pr_fmt(fmt) "ingenic-tcu-clk: " fmt
+
+enum tcu_clk_parent {
+	TCU_PARENT_PCLK,
+	TCU_PARENT_RTC,
+	TCU_PARENT_EXT,
+};
+
+struct ingenic_soc_info {
+	unsigned int num_channels;
+	bool has_ost;
+	bool has_tcu_clk;
+};
+
+struct ingenic_tcu_clk_info {
+	struct clk_init_data init_data;
+	u8 gate_bit;
+	u8 tcsr_reg;
+};
+
+struct ingenic_tcu_clk {
+	struct clk_hw hw;
+	unsigned int idx;
+	struct ingenic_tcu *tcu;
+	const struct ingenic_tcu_clk_info *info;
+};
+
+struct ingenic_tcu {
+	const struct ingenic_soc_info *soc_info;
+	struct regmap *map;
+	struct clk *clk;
+
+	struct clk_hw_onecell_data *clocks;
+};
+
+static struct ingenic_tcu *ingenic_tcu;
+
+static inline struct ingenic_tcu_clk *to_tcu_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct ingenic_tcu_clk, hw);
+}
+
+static int ingenic_tcu_enable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+	regmap_write(tcu->map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static void ingenic_tcu_disable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+	regmap_write(tcu->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static int ingenic_tcu_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int value;
+
+	regmap_read(tcu_clk->tcu->map, TCU_REG_TSR, &value);
+
+	return !(value & BIT(info->gate_bit));
+}
+
+static bool ingenic_tcu_enable_regs(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	bool enabled = false;
+
+	/*
+	 * If the SoC has no global TCU clock, we must ungate the channel's
+	 * clock to be able to access its registers.
+	 * If we have a TCU clock, it will be enabled automatically as it has
+	 * been attached to the regmap.
+	 */
+	if (!tcu->clk) {
+		enabled = !!ingenic_tcu_is_enabled(hw);
+		regmap_write(tcu->map, TCU_REG_TSCR, BIT(info->gate_bit));
+	}
+
+	return enabled;
+}
+
+static void ingenic_tcu_disable_regs(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+	if (!tcu->clk)
+		regmap_write(tcu->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int val = 0;
+	int ret;
+
+	ret = regmap_read(tcu_clk->tcu->map, info->tcsr_reg, &val);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	return ffs(val & TCU_TCSR_PARENT_CLOCK_MASK) - 1;
+}
+
+static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	bool was_enabled;
+	int ret;
+
+	was_enabled = ingenic_tcu_enable_regs(hw);
+
+	ret = regmap_update_bits(tcu_clk->tcu->map, info->tcsr_reg,
+				 TCU_TCSR_PARENT_CLOCK_MASK, BIT(idx));
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	if (!was_enabled)
+		ingenic_tcu_disable_regs(hw);
+
+	return 0;
+}
+
+static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int prescale;
+	int ret;
+
+	ret = regmap_read(tcu_clk->tcu->map, info->tcsr_reg, &prescale);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %i", tcu_clk->idx);
+
+	prescale = (prescale & TCU_TCSR_PRESCALE_MASK) >> TCU_TCSR_PRESCALE_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static u8 ingenic_tcu_get_prescale(unsigned long rate, unsigned long req_rate)
+{
+	u8 prescale;
+
+	for (prescale = 0; prescale < 5; prescale++)
+		if ((rate >> (prescale * 2)) <= req_rate)
+			return prescale;
+
+	return 5; /* /1024 divider */
+}
+
+static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	unsigned long rate = *parent_rate;
+	u8 prescale;
+
+	if (req_rate > rate)
+		return -EINVAL;
+
+	prescale = ingenic_tcu_get_prescale(rate, req_rate);
+
+	return rate >> (prescale * 2);
+}
+
+static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	u8 prescale = ingenic_tcu_get_prescale(parent_rate, req_rate);
+	bool was_enabled;
+	int ret;
+
+	was_enabled = ingenic_tcu_enable_regs(hw);
+
+	ret = regmap_update_bits(tcu_clk->tcu->map, info->tcsr_reg,
+				 TCU_TCSR_PRESCALE_MASK,
+				 prescale << TCU_TCSR_PRESCALE_LSB);
+	WARN_ONCE(ret < 0, "Unable to update TCSR %i", tcu_clk->idx);
+
+	if (!was_enabled)
+		ingenic_tcu_disable_regs(hw);
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_tcu_clk_ops = {
+	.get_parent	= ingenic_tcu_get_parent,
+	.set_parent	= ingenic_tcu_set_parent,
+
+	.recalc_rate	= ingenic_tcu_recalc_rate,
+	.round_rate	= ingenic_tcu_round_rate,
+	.set_rate	= ingenic_tcu_set_rate,
+
+	.enable		= ingenic_tcu_enable,
+	.disable	= ingenic_tcu_disable,
+	.is_enabled	= ingenic_tcu_is_enabled,
+};
+
+static const char * const ingenic_tcu_timer_parents[] = {
+	[TCU_PARENT_PCLK] = "pclk",
+	[TCU_PARENT_RTC]  = "rtc",
+	[TCU_PARENT_EXT]  = "ext",
+};
+
+#define DEF_TIMER(_name, _gate_bit, _tcsr)				\
+	{								\
+		.init_data = {						\
+			.name = _name,					\
+			.parent_names = ingenic_tcu_timer_parents,	\
+			.num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
+			.ops = &ingenic_tcu_clk_ops,			\
+			.flags = CLK_SET_RATE_UNGATE,			\
+		},							\
+		.gate_bit = _gate_bit,					\
+		.tcsr_reg = _tcsr,					\
+	}
+static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
+	[TCU_CLK_TIMER0] = DEF_TIMER("timer0", 0, TCU_REG_TCSRc(0)),
+	[TCU_CLK_TIMER1] = DEF_TIMER("timer1", 1, TCU_REG_TCSRc(1)),
+	[TCU_CLK_TIMER2] = DEF_TIMER("timer2", 2, TCU_REG_TCSRc(2)),
+	[TCU_CLK_TIMER3] = DEF_TIMER("timer3", 3, TCU_REG_TCSRc(3)),
+	[TCU_CLK_TIMER4] = DEF_TIMER("timer4", 4, TCU_REG_TCSRc(4)),
+	[TCU_CLK_TIMER5] = DEF_TIMER("timer5", 5, TCU_REG_TCSRc(5)),
+	[TCU_CLK_TIMER6] = DEF_TIMER("timer6", 6, TCU_REG_TCSRc(6)),
+	[TCU_CLK_TIMER7] = DEF_TIMER("timer7", 7, TCU_REG_TCSRc(7)),
+};
+
+static const struct ingenic_tcu_clk_info ingenic_tcu_watchdog_clk_info =
+					 DEF_TIMER("wdt", 16, TCU_REG_WDT_TCSR);
+static const struct ingenic_tcu_clk_info ingenic_tcu_ost_clk_info =
+					 DEF_TIMER("ost", 15, TCU_REG_OST_TCSR);
+#undef DEF_TIMER
+
+static int __init ingenic_tcu_register_clock(struct ingenic_tcu *tcu,
+			unsigned int idx, enum tcu_clk_parent parent,
+			const struct ingenic_tcu_clk_info *info,
+			struct clk_hw_onecell_data *clocks)
+{
+	struct ingenic_tcu_clk *tcu_clk;
+	int err;
+
+	tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
+	if (!tcu_clk)
+		return -ENOMEM;
+
+	tcu_clk->hw.init = &info->init_data;
+	tcu_clk->idx = idx;
+	tcu_clk->info = info;
+	tcu_clk->tcu = tcu;
+
+	/* Reset channel and clock divider, set default parent */
+	ingenic_tcu_enable_regs(&tcu_clk->hw);
+	regmap_update_bits(tcu->map, info->tcsr_reg, 0xffff, BIT(parent));
+	ingenic_tcu_disable_regs(&tcu_clk->hw);
+
+	err = clk_hw_register(NULL, &tcu_clk->hw);
+	if (err) {
+		kfree(tcu_clk);
+		return err;
+	}
+
+	clocks->hws[idx] = &tcu_clk->hw;
+
+	return 0;
+}
+
+static const struct ingenic_soc_info jz4740_soc_info = {
+	.num_channels = 8,
+	.has_ost = false,
+	.has_tcu_clk = true,
+};
+
+static const struct ingenic_soc_info jz4725b_soc_info = {
+	.num_channels = 6,
+	.has_ost = true,
+	.has_tcu_clk = true,
+};
+
+static const struct ingenic_soc_info jz4770_soc_info = {
+	.num_channels = 8,
+	.has_ost = true,
+	.has_tcu_clk = false,
+};
+
+static const struct of_device_id ingenic_tcu_of_match[] __initconst = {
+	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
+	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
+	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4770_soc_info, },
+	{ }
+};
+
+static int __init ingenic_tcu_probe(struct device_node *np)
+{
+	const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
+	struct ingenic_tcu *tcu;
+	struct regmap *map;
+	unsigned int i;
+	int ret;
+
+	map = ingenic_tcu_get_regmap(np);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->map = map;
+	tcu->soc_info = id->data;
+
+	if (tcu->soc_info->has_tcu_clk) {
+		tcu->clk = of_clk_get_by_name(np, "tcu");
+		if (IS_ERR(tcu->clk)) {
+			ret = PTR_ERR(tcu->clk);
+			pr_crit("Cannot get TCU clock\n");
+			goto err_free_tcu;
+		}
+
+		ret = clk_prepare_enable(tcu->clk);
+		if (ret) {
+			pr_crit("Unable to enable TCU clock\n");
+			goto err_put_clk;
+		}
+	}
+
+	tcu->clocks = kzalloc(sizeof(*tcu->clocks) +
+			      sizeof(*tcu->clocks->hws) * TCU_CLK_COUNT,
+			      GFP_KERNEL);
+	if (!tcu->clocks) {
+		ret = -ENOMEM;
+		goto err_clk_disable;
+	}
+
+	tcu->clocks->num = TCU_CLK_COUNT;
+
+	for (i = 0; i < tcu->soc_info->num_channels; i++) {
+		ret = ingenic_tcu_register_clock(tcu, i, TCU_PARENT_EXT,
+						 &ingenic_tcu_clk_info[i],
+						 tcu->clocks);
+		if (ret) {
+			pr_crit("cannot register clock %i\n", i);
+			goto err_unregister_timer_clocks;
+		}
+	}
+
+	/*
+	 * We set EXT as the default parent clock for all the TCU clocks
+	 * except for the watchdog one, where we set the RTC clock as the
+	 * parent. Since the EXT and PCLK are much faster than the RTC clock,
+	 * the watchdog would kick after a maximum time of 5s, and we might
+	 * want a slower kicking time.
+	 */
+	ret = ingenic_tcu_register_clock(tcu, TCU_CLK_WDT, TCU_PARENT_RTC,
+					 &ingenic_tcu_watchdog_clk_info,
+					 tcu->clocks);
+	if (ret) {
+		pr_crit("cannot register watchdog clock\n");
+		goto err_unregister_timer_clocks;
+	}
+
+	if (tcu->soc_info->has_ost) {
+		ret = ingenic_tcu_register_clock(tcu, TCU_CLK_OST,
+						 TCU_PARENT_EXT,
+						 &ingenic_tcu_ost_clk_info,
+						 tcu->clocks);
+		if (ret) {
+			pr_crit("cannot register ost clock\n");
+			goto err_unregister_watchdog_clock;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, tcu->clocks);
+	if (ret) {
+		pr_crit("cannot add OF clock provider\n");
+		goto err_unregister_ost_clock;
+	}
+
+	ingenic_tcu = tcu;
+
+	return 0;
+
+err_unregister_ost_clock:
+	if (tcu->soc_info->has_ost)
+		clk_hw_unregister(tcu->clocks->hws[i + 1]);
+err_unregister_watchdog_clock:
+	clk_hw_unregister(tcu->clocks->hws[i]);
+err_unregister_timer_clocks:
+	for (i = 0; i < tcu->clocks->num; i++)
+		if (tcu->clocks->hws[i])
+			clk_hw_unregister(tcu->clocks->hws[i]);
+	kfree(tcu->clocks);
+err_clk_disable:
+	if (tcu->soc_info->has_tcu_clk)
+		clk_disable_unprepare(tcu->clk);
+err_put_clk:
+	if (tcu->soc_info->has_tcu_clk)
+		clk_put(tcu->clk);
+err_free_tcu:
+	kfree(tcu);
+	return ret;
+}
+
+static int __maybe_unused tcu_pm_suspend(void)
+{
+	struct ingenic_tcu *tcu = ingenic_tcu;
+
+	if (tcu->clk)
+		clk_disable(tcu->clk);
+
+	return 0;
+}
+
+static void __maybe_unused tcu_pm_resume(void)
+{
+	struct ingenic_tcu *tcu = ingenic_tcu;
+
+	if (tcu->clk)
+		clk_enable(tcu->clk);
+}
+
+static struct syscore_ops __maybe_unused tcu_pm_ops = {
+	.suspend = tcu_pm_suspend,
+	.resume = tcu_pm_resume,
+};
+
+static void __init ingenic_tcu_init(struct device_node *np)
+{
+	int ret = ingenic_tcu_probe(np);
+
+	if (ret)
+		pr_crit("Failed to initialize TCU clocks: %i\n", ret);
+
+	if (IS_ENABLED(CONFIG_PM_SLEEP))
+		register_syscore_ops(&tcu_pm_ops);
+}
+
+CLK_OF_DECLARE(jz4740_cgu, "ingenic,jz4740-tcu", ingenic_tcu_init);
+CLK_OF_DECLARE(jz4725b_cgu, "ingenic,jz4725b-tcu", ingenic_tcu_init);
+CLK_OF_DECLARE(jz4770_cgu, "ingenic,jz4770-tcu", ingenic_tcu_init);