diff mbox series

[v9,5/5] MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module

Message ID 20191010145953.21327-6-tbogendoerfer@suse.de (mailing list archive)
State Superseded
Headers show
Series Use MFD framework for SGI IOC3 drivers | expand

Commit Message

Thomas Bogendoerfer Oct. 10, 2019, 2:59 p.m. UTC
PROM only enables ethernet PHY on first Origin 200 module, so we must
do it ourselves for the second module.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 arch/mips/pci/pci-ip27.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Sergei Shtylyov Oct. 10, 2019, 4:37 p.m. UTC | #1
On 10/10/2019 05:59 PM, Thomas Bogendoerfer wrote:

> PROM only enables ethernet PHY on first Origin 200 module, so we must
> do it ourselves for the second module.
> 
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> ---
>  arch/mips/pci/pci-ip27.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
> index 441eb9383b20..7cc784cb299b 100644
> --- a/arch/mips/pci/pci-ip27.c
> +++ b/arch/mips/pci/pci-ip27.c
> @@ -7,6 +7,11 @@
>   * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
>   * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
>   */
> +#include <asm/sn/addrs.h>
> +#include <asm/sn/types.h>
> +#include <asm/sn/klconfig.h>
> +#include <asm/sn/hub.h>
> +#include <asm/sn/ioc3.h>
>  #include <asm/pci/bridge.h>
>  
>  dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> @@ -31,3 +36,20 @@ int pcibus_to_node(struct pci_bus *bus)
>  }
>  EXPORT_SYMBOL(pcibus_to_node);
>  #endif /* CONFIG_NUMA */
> +
> +static void ip29_fixup_phy(struct pci_dev *dev)
> +{
> +	int nasid = pcibus_to_node(dev->bus);
> +	u32 sid;
> +
> +	if (nasid != 1)
> +		return; /* only needed on second module */
> +
> +	/* enable ethernet PHY on IP29 systemboard */
> +	pci_read_config_dword(dev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
> +	if (sid == ((PCI_VENDOR_ID_SGI << 16) | IOC3_SUBSYS_IP29_SYSBOARD))

   I thought PCI was little endian, thuis vendor ID at offset 0 and device ID
at offset 2?

[...]

MBR, Sergei
Thomas Bogendoerfer Oct. 11, 2019, 9:28 a.m. UTC | #2
On Thu, 10 Oct 2019 19:37:15 +0300
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> wrote:

> On 10/10/2019 05:59 PM, Thomas Bogendoerfer wrote:
> > +	/* enable ethernet PHY on IP29 systemboard */
> > +	pci_read_config_dword(dev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
> > +	if (sid == ((PCI_VENDOR_ID_SGI << 16) | IOC3_SUBSYS_IP29_SYSBOARD))
> 
>    I thought PCI was little endian, thuis vendor ID at offset 0 and device ID
> at offset 2?

you are right. I already messed it up in pci-xtalk-bridge.c. As this is just a
fake sub device id, there is no harm, but I'll fix it.

Thomas.
diff mbox series

Patch

diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 441eb9383b20..7cc784cb299b 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -7,6 +7,11 @@ 
  * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
+#include <asm/sn/addrs.h>
+#include <asm/sn/types.h>
+#include <asm/sn/klconfig.h>
+#include <asm/sn/hub.h>
+#include <asm/sn/ioc3.h>
 #include <asm/pci/bridge.h>
 
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
@@ -31,3 +36,20 @@  int pcibus_to_node(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pcibus_to_node);
 #endif /* CONFIG_NUMA */
+
+static void ip29_fixup_phy(struct pci_dev *dev)
+{
+	int nasid = pcibus_to_node(dev->bus);
+	u32 sid;
+
+	if (nasid != 1)
+		return; /* only needed on second module */
+
+	/* enable ethernet PHY on IP29 systemboard */
+	pci_read_config_dword(dev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
+	if (sid == ((PCI_VENDOR_ID_SGI << 16) | IOC3_SUBSYS_IP29_SYSBOARD))
+		REMOTE_HUB_S(nasid, MD_LED0, 0x09);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+			ip29_fixup_phy);