@@ -806,7 +806,8 @@ struct bridge_controller {
unsigned long baddr;
unsigned long intr_addr;
struct irq_domain *domain;
- unsigned int pci_int[8];
+ unsigned int pci_int[8][2];
+ unsigned int int_mapping[8][2];
u32 ioc3_sid[8];
nasid_t nasid;
};
@@ -437,17 +437,28 @@ static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
struct irq_alloc_info info;
int irq;
- irq = bc->pci_int[slot];
+ switch (pin) {
+ case PCI_INTERRUPT_UNKNOWN:
+ case PCI_INTERRUPT_INTA:
+ case PCI_INTERRUPT_INTC:
+ pin = 0;
+ break;
+ case PCI_INTERRUPT_INTB:
+ case PCI_INTERRUPT_INTD:
+ pin = 1;
+ }
+
+ irq = bc->pci_int[slot][pin];
if (irq == -1) {
info.ctrl = bc;
info.nasid = bc->nasid;
- info.pin = slot;
+ info.pin = bc->int_mapping[slot][pin];
irq = irq_domain_alloc_irqs(bc->domain, 1, bc->nasid, &info);
if (irq < 0)
return irq;
- bc->pci_int[slot] = irq;
+ bc->pci_int[slot][pin] = irq;
}
return irq;
}
@@ -458,21 +469,26 @@ static void bridge_setup_ip27_baseio6g(struct bridge_controller *bc)
{
bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO6G);
bc->ioc3_sid[6] = IOC3_SID(IOC3_SUBSYS_IP27_MIO);
+ bc->int_mapping[2][1] = 4;
+ bc->int_mapping[6][1] = 6;
}
static void bridge_setup_ip27_baseio(struct bridge_controller *bc)
{
bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO);
+ bc->int_mapping[2][1] = 4;
}
static void bridge_setup_ip29_baseio(struct bridge_controller *bc)
{
bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP29_SYSBOARD);
+ bc->int_mapping[2][1] = 3;
}
static void bridge_setup_ip30_sysboard(struct bridge_controller *bc)
{
bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP30_SYSBOARD);
+ bc->int_mapping[2][1] = 4;
}
static void bridge_setup_menet(struct bridge_controller *bc)
@@ -655,7 +671,11 @@ static int bridge_probe(struct platform_device *pdev)
for (slot = 0; slot < 8; slot++) {
bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
- bc->pci_int[slot] = -1;
+ bc->pci_int[slot][0] = -1;
+ bc->pci_int[slot][1] = -1;
+ /* default interrupt pin mapping */
+ bc->int_mapping[slot][0] = slot;
+ bc->int_mapping[slot][1] = slot ^ 4;
}
bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
Implented mapping of PCI INTB/C/D, which is needed for PCI multifunction devices, PCI-PCI bridges and IOC3. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> --- arch/mips/include/asm/pci/bridge.h | 3 ++- arch/mips/pci/pci-xtalk-bridge.c | 28 ++++++++++++++++++++++++---- 2 files changed, 26 insertions(+), 5 deletions(-)