deleted file mode 100644
@@ -1,138 +0,0 @@
-Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
-==========================================================
-
-For a description of the TCU hardware and drivers, have a look at
-Documentation/mips/ingenic-tcu.rst.
-
-Required properties:
-
-- compatible: Must be one of:
- * ingenic,jz4740-tcu
- * ingenic,jz4725b-tcu
- * ingenic,jz4770-tcu
- * ingenic,x1000-tcu
- followed by "simple-mfd".
-- reg: Should be the offset/length value corresponding to the TCU registers
-- clocks: List of phandle & clock specifiers for clocks external to the TCU.
- The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
- should be provided if the SoC has it.
-- clock-names: List of name strings for the external clocks.
-- #clock-cells: Should be <1>;
- Clock consumers specify this argument to identify a clock. The valid values
- may be found in <dt-bindings/clock/ingenic,tcu.h>.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value should be 1.
-- interrupts : Specifies the interrupt the controller is connected to.
-
-Optional properties:
-
-- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
- Default value is 0xfc.
-
-
-Children nodes
-==========================================================
-
-
-PWM node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
- * ingenic,jz4740-pwm
- * ingenic,jz4725b-pwm
-- #pwm-cells: Should be 3. See ../pwm/pwm.yaml for a description of the cell
- format.
-- clocks: List of phandle & clock specifiers for the TCU clocks.
-- clock-names: List of name strings for the TCU clocks.
-
-
-Watchdog node:
---------------
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-watchdog"
-- clocks: phandle to the WDT clock
-- clock-names: should be "wdt"
-
-
-OS Timer node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
- * ingenic,jz4725b-ost
- * ingenic,jz4770-ost
-- clocks: phandle to the OST clock
-- clock-names: should be "ost"
-- interrupts : Specifies the interrupt the OST is connected to.
-
-
-Example
-==========================================================
-
-#include <dt-bindings/clock/jz4770-cgu.h>
-#include <dt-bindings/clock/ingenic,tcu.h>
-
-/ {
- tcu: timer@10002000 {
- compatible = "ingenic,jz4770-tcu", "simple-mfd";
- reg = <0x10002000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x10002000 0x1000>;
-
- #clock-cells = <1>;
-
- clocks = <&cgu JZ4770_CLK_RTC
- &cgu JZ4770_CLK_EXT
- &cgu JZ4770_CLK_PCLK>;
- clock-names = "rtc", "ext", "pclk";
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&intc>;
- interrupts = <27 26 25>;
-
- watchdog: watchdog@0 {
- compatible = "ingenic,jz4740-watchdog";
- reg = <0x0 0xc>;
-
- clocks = <&tcu TCU_CLK_WDT>;
- clock-names = "wdt";
- };
-
- pwm: pwm@40 {
- compatible = "ingenic,jz4740-pwm";
- reg = <0x40 0x80>;
-
- #pwm-cells = <3>;
-
- clocks = <&tcu TCU_CLK_TIMER0
- &tcu TCU_CLK_TIMER1
- &tcu TCU_CLK_TIMER2
- &tcu TCU_CLK_TIMER3
- &tcu TCU_CLK_TIMER4
- &tcu TCU_CLK_TIMER5
- &tcu TCU_CLK_TIMER6
- &tcu TCU_CLK_TIMER7>;
- clock-names = "timer0", "timer1", "timer2", "timer3",
- "timer4", "timer5", "timer6", "timer7";
- };
-
- ost: timer@e0 {
- compatible = "ingenic,jz4770-ost";
- reg = <0xe0 0x20>;
-
- clocks = <&tcu TCU_CLK_OST>;
- clock-names = "ost";
-
- interrupts = <15>;
- };
- };
-};
new file mode 100644
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Timer/Counter Unit (TCU) devicetree bindings
+
+description: |
+ For a description of the TCU hardware and drivers, have a look at
+ Documentation/mips/ingenic-tcu.rst.
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ingenic,jz4740-tcu
+ - ingenic,jz4725b-tcu
+ - ingenic,jz4770-tcu
+ - ingenic,jz4780-tcu
+ - ingenic,x1000-tcu
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^timer@[0-9a-f]+$"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller: true
+
+ ranges: true
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ingenic,jz4740-tcu
+ - ingenic,jz4725b-tcu
+ - ingenic,jz4770-tcu
+ - ingenic,x1000-tcu
+ - const: simple-mfd
+ - items:
+ - const: ingenic,jz4780-tcu
+ - const: ingenic,jz4770-tcu
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: RTC clock
+ - description: EXT clock
+ - description: PCLK clock
+ - description: TCU clock
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: rtc
+ - const: ext
+ - const: pclk
+ - const: tcu
+ minItems: 3
+
+ interrupts:
+ items:
+ - description: TCU0 interrupt
+ - description: TCU1 interrupt
+ - description: TCU2 interrupt
+ minItems: 1
+
+ assigned-clocks:
+ minItems: 1
+ maxItems: 8
+
+ assigned-clock-parents:
+ minItems: 1
+ maxItems: 8
+
+ assigned-clock-rates:
+ minItems: 1
+ maxItems: 8
+
+ ingenic,pwm-channels-mask:
+ description: Bitmask of TCU channels reserved for PWM use.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0x00
+ - maximum: 0xff
+ - default: 0xfc
+
+patternProperties:
+ "^watchdog@[a-f0-9]+$":
+ type: object
+ allOf: [ $ref: ../watchdog/watchdog.yaml# ]
+ properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-watchdog
+ - ingenic,jz4780-watchdog
+ - items:
+ - const: ingenic,jz4770-watchdog
+ - const: ingenic,jz4740-watchdog
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: wdt
+
+ required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+ "^pwm@[a-f0-9]+$":
+ type: object
+ allOf: [ $ref: ../pwm/pwm.yaml# ]
+ properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-pwm
+ - items:
+ - enum:
+ - ingenic,jz4770-pwm
+ - ingenic,jz4780-pwm
+ - const: ingenic,jz4740-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 6
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: timer0
+ - const: timer1
+ - const: timer2
+ - const: timer3
+ - const: timer4
+ - const: timer5
+ - const: timer6
+ - const: timer7
+ minItems: 6
+
+ required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+ "^timer@[a-f0-9]+$":
+ type: object
+ properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4725b-ost
+ - ingenic,jz4770-ost
+ - items:
+ - const: ingenic,jz4780-ost
+ - const: ingenic,jz4770-ost
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ost
+
+ interrupts:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+ additionalProperties: false
+
+required:
+ - "#clock-cells"
+ - "#interrupt-cells"
+ - interrupt-controller
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4770-cgu.h>
+ #include <dt-bindings/clock/ingenic,tcu.h>
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_EXT>,
+ <&cgu JZ4770_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4770-watchdog", "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>,
+ <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>,
+ <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>,
+ <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>,
+ <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
Convert the ingenic,tcu.txt file to YAML. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- Notes: This one patch was sent as standalone before, so it's technically a V2. Support for 'assigned-clocks', 'assigned-clock-parents', 'assigned-clock-rates' was added. .../devicetree/bindings/timer/ingenic,tcu.txt | 138 --------- .../bindings/timer/ingenic,tcu.yaml | 281 ++++++++++++++++++ 2 files changed, 281 insertions(+), 138 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.yaml