@@ -106,6 +106,7 @@ static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
dw_ced->eoi(&dw_ced->timer);
evt->event_handler(evt);
+
return IRQ_HANDLED;
}
@@ -123,8 +124,7 @@ static int apbt_shutdown(struct clock_event_device *evt)
struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
u32 ctrl;
- pr_debug("%s CPU %d state=shutdown\n", __func__,
- cpumask_first(evt->cpumask));
+ pr_debug("%s state=shutdown\n", __func__);
ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
ctrl &= ~APBTMR_CONTROL_ENABLE;
@@ -137,8 +137,7 @@ static int apbt_set_oneshot(struct clock_event_device *evt)
struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
u32 ctrl;
- pr_debug("%s CPU %d state=oneshot\n", __func__,
- cpumask_first(evt->cpumask));
+ pr_debug("%s state=oneshot\n", __func__);
ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
/*
@@ -170,8 +169,7 @@ static int apbt_set_periodic(struct clock_event_device *evt)
unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
u32 ctrl;
- pr_debug("%s CPU %d state=periodic\n", __func__,
- cpumask_first(evt->cpumask));
+ pr_debug("%s state=periodic\n", __func__);
ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
@@ -194,8 +192,7 @@ static int apbt_resume(struct clock_event_device *evt)
{
struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
- pr_debug("%s CPU %d state=resume\n", __func__,
- cpumask_first(evt->cpumask));
+ pr_debug("%s state=resume\n", __func__);
apbt_enable_int(&dw_ced->timer);
return 0;
@@ -222,7 +219,6 @@ static int apbt_next_event(unsigned long delta,
/**
* dw_apb_clockevent_init() - use an APB timer as a clock_event_device
*
- * @cpu: The CPU the events will be targeted at.
* @name: The name used for the timer and the IRQ for it.
* @rating: The rating to give the timer.
* @base: I/O base for the timer registers.
@@ -237,7 +233,7 @@ static int apbt_next_event(unsigned long delta,
* releasing the IRQ.
*/
struct dw_apb_clock_event_device *
-dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
+dw_apb_clockevent_init(const char *name, unsigned int rating,
void __iomem *base, int irq, unsigned long freq)
{
struct dw_apb_clock_event_device *dw_ced =
@@ -257,7 +253,7 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
dw_ced->ced.max_delta_ticks = 0x7fffffff;
dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
dw_ced->ced.min_delta_ticks = 5000;
- dw_ced->ced.cpumask = cpumask_of(cpu);
+ dw_ced->ced.cpumask = cpu_possible_mask;
dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
dw_ced->ced.set_state_shutdown = apbt_shutdown;
@@ -73,8 +73,7 @@ static void __init add_clockevent(struct device_node *event_timer)
timer_get_base_and_rate(event_timer, &iobase, &rate);
- ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
- rate);
+ ced = dw_apb_clockevent_init(event_timer->name, 300, iobase, irq, rate);
if (!ced)
panic("Unable to initialise clockevent device");
@@ -39,7 +39,7 @@ void dw_apb_clockevent_resume(struct dw_apb_clock_event_device *dw_ced);
void dw_apb_clockevent_stop(struct dw_apb_clock_event_device *dw_ced);
struct dw_apb_clock_event_device *
-dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
+dw_apb_clockevent_init(const char *name, unsigned int rating,
void __iomem *base, int irq, unsigned long freq);
struct dw_apb_clocksource *
dw_apb_clocksource_init(unsigned rating, const char *name, void __iomem *base,
Currently the DW APB Timer driver binds all clockevent timers to CPU #0. This isn't good for multiple reasons. First of all seeing the device is placed on APB bus (which makes it accessible from any CPU core), accessible over MMIO and having the DYNIRQ flag set we can be sure that manually binding the timer to any CPU just isn't correct. By doing so we just set an extra limitation on device usage. This also doesn't reflect the device actual capability, since by setting the IRQ affinity we can make it virtually local to any CPU. Secondly imagine if you had a real CPU-local timer with the same rating and the same CPU-affinity. In this case if DW APB timer was registered first, then due to the clockevent framework tick-timer selection procedure we'll end up with the real CPU-local timer being left unselected for clock-events tracking. But on most of the platforms (MIPS/ARM/etc) such timers are normally embedded into the CPU core and are accessible with much better performance then devices placed on APB. For instance in MIPS architectures there is r4k-timer, which is CPU-local, assigned with the same rating, and normally its clockevent device is registered after the platform-specific one. So in order to fix all of these issues lets set the DW APB clockevent timer cpumask to be 'cpu_possible_mask'. By doing so the clockevent framework would prefer to select the real CPU-local timer instead of DW APB one. Otherwise if there is no other than DW APB device for clockevents tracking then it will be selected. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: devicetree@vger.kernel.org --- drivers/clocksource/dw_apb_timer.c | 18 +++++++----------- drivers/clocksource/dw_apb_timer_of.c | 3 +-- include/linux/dw_apb_timer.h | 2 +- 3 files changed, 9 insertions(+), 14 deletions(-)