| Message ID | 20200510095019.20981-4-Sergey.Semin@baikalelectronics.ru (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | i2c: designeware: Add Baikal-T1 System I2C support | expand |
On Sun, May 10, 2020 at 12:50:09PM +0300, Serge Semin wrote: > Add the "baikal,bt1-sys-i2c" compatible string to the DW I2C binding and > make sure the reg property isn't required in this case because the > controller is embedded into the Baikal-T1 System Controller. The rest of > the DW APB I2C properties are compatible and can be freely used to describe > the Baikal-T1 I2C controller dts-node. Is there not a sub-range of the system controller with the I2C registers? I'd assume there is, so you can still have 'reg' even if Linux doesn't use it (currently). > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> > Cc: Paul Burton <paulburton@kernel.org> > Cc: Ralf Baechle <ralf@linux-mips.org> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Cc: Mika Westerberg <mika.westerberg@linux.intel.com> > Cc: Wolfram Sang <wsa@the-dreams.de> > Cc: Frank Rowand <frowand.list@gmail.com> > Cc: linux-mips@vger.kernel.org > > --- > > Rob, I had to remove your acked-by tag because of the changes introduced > in v2 of the patch. > > Changelog v2: > - Make the reg property being optional if it's Baikal-T1 System I2C DT > node. > --- > .../devicetree/bindings/i2c/snps,designware-i2c.yaml | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > index 8d4e5fccbd1c..579964098eb9 100644 > --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > @@ -21,6 +21,15 @@ allOf: > properties: > reg: > maxItems: 1 > + - if: > + properties: > + compatible: > + not: > + contains: > + const: baikal,bt1-sys-i2c > + then: > + required: > + - reg > > properties: > compatible: > @@ -31,6 +40,8 @@ properties: > items: > - const: mscc,ocelot-i2c > - const: snps,designware-i2c > + - description: Baikal-T1 SoC System I2C controller > + const: baikal,bt1-sys-i2c > > reg: > minItems: 1 > @@ -98,7 +109,6 @@ unevaluatedProperties: false > > required: > - compatible > - - reg > - "#address-cells" > - "#size-cells" > - interrupts > -- > 2.25.1 >
On Mon, May 18, 2020 at 02:33:19PM -0600, Rob Herring wrote: > On Sun, May 10, 2020 at 12:50:09PM +0300, Serge Semin wrote: > > Add the "baikal,bt1-sys-i2c" compatible string to the DW I2C binding and > > make sure the reg property isn't required in this case because the > > controller is embedded into the Baikal-T1 System Controller. The rest of > > the DW APB I2C properties are compatible and can be freely used to describe > > the Baikal-T1 I2C controller dts-node. > > Is there not a sub-range of the system controller with the I2C > registers? I'd assume there is, so you can still have 'reg' even if > Linux doesn't use it (currently). Yes, there is a range. It's just three access registers. Is it wrong to make the reg property being optional in this case since it can be accessed over syscon regmap? Do you suggest to get back the reg property being required for our device? -Sergey > > > > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > > Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> > > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> > > Cc: Paul Burton <paulburton@kernel.org> > > Cc: Ralf Baechle <ralf@linux-mips.org> > > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > Cc: Mika Westerberg <mika.westerberg@linux.intel.com> > > Cc: Wolfram Sang <wsa@the-dreams.de> > > Cc: Frank Rowand <frowand.list@gmail.com> > > Cc: linux-mips@vger.kernel.org > > > > --- > > > > Rob, I had to remove your acked-by tag because of the changes introduced > > in v2 of the patch. > > > > Changelog v2: > > - Make the reg property being optional if it's Baikal-T1 System I2C DT > > node. > > --- > > .../devicetree/bindings/i2c/snps,designware-i2c.yaml | 12 +++++++++++- > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > > index 8d4e5fccbd1c..579964098eb9 100644 > > --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > > +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > > @@ -21,6 +21,15 @@ allOf: > > properties: > > reg: > > maxItems: 1 > > + - if: > > + properties: > > + compatible: > > + not: > > + contains: > > + const: baikal,bt1-sys-i2c > > + then: > > + required: > > + - reg > > > > properties: > > compatible: > > @@ -31,6 +40,8 @@ properties: > > items: > > - const: mscc,ocelot-i2c > > - const: snps,designware-i2c > > + - description: Baikal-T1 SoC System I2C controller > > + const: baikal,bt1-sys-i2c > > > > reg: > > minItems: 1 > > @@ -98,7 +109,6 @@ unevaluatedProperties: false > > > > required: > > - compatible > > - - reg > > - "#address-cells" > > - "#size-cells" > > - interrupts > > -- > > 2.25.1 > >
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml index 8d4e5fccbd1c..579964098eb9 100644 --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -21,6 +21,15 @@ allOf: properties: reg: maxItems: 1 + - if: + properties: + compatible: + not: + contains: + const: baikal,bt1-sys-i2c + then: + required: + - reg properties: compatible: @@ -31,6 +40,8 @@ properties: items: - const: mscc,ocelot-i2c - const: snps,designware-i2c + - description: Baikal-T1 SoC System I2C controller + const: baikal,bt1-sys-i2c reg: minItems: 1 @@ -98,7 +109,6 @@ unevaluatedProperties: false required: - compatible - - reg - "#address-cells" - "#size-cells" - interrupts
Add the "baikal,bt1-sys-i2c" compatible string to the DW I2C binding and make sure the reg property isn't required in this case because the controller is embedded into the Baikal-T1 System Controller. The rest of the DW APB I2C properties are compatible and can be freely used to describe the Baikal-T1 I2C controller dts-node. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-mips@vger.kernel.org --- Rob, I had to remove your acked-by tag because of the changes introduced in v2 of the patch. Changelog v2: - Make the reg property being optional if it's Baikal-T1 System I2C DT node. --- .../devicetree/bindings/i2c/snps,designware-i2c.yaml | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)