From patchwork Fri May 15 10:47:58 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 11551163 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CD50F739 for ; Fri, 15 May 2020 10:49:57 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id BBC5020767 for ; Fri, 15 May 2020 10:49:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728081AbgEOKty (ORCPT ); Fri, 15 May 2020 06:49:54 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:35882 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728139AbgEOKty (ORCPT ); Fri, 15 May 2020 06:49:54 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id 9F28E8030791; Fri, 15 May 2020 10:49:49 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id EZb9Dz39e0K6; Fri, 15 May 2020 13:49:44 +0300 (MSK) From: Serge Semin To: Mark Brown , Rob Herring CC: Serge Semin , Serge Semin , Georgy Vlasov , Ramil Zaripov , Alexey Malahov , Thomas Bogendoerfer , Paul Burton , Ralf Baechle , Arnd Bergmann , Allison Randal , Andy Shevchenko , Gareth Williams , , Wan Ahmad Zainie , , , Subject: [PATCH v2 19/19] dt-bindings: spi: Convert DW SPI binding to DT schema Date: Fri, 15 May 2020 13:47:58 +0300 Message-ID: <20200515104758.6934-20-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru> References: <20200508132943.9826-1-Sergey.Semin@baikalelectronics.ru> <20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Modern device tree bindings are supposed to be created as YAML-files in accordance with dt-schema. This commit replaces two DW SPI legacy bare text bindings with YAML file. As before the bindings file states that the corresponding dts node is supposed to be compatible either with generic DW APB SSI controller or with Microsemi/Amazon/Renesas/Intel vendors-specific controllers, to have registers, interrupts and clocks properties. Though in case of Microsemi version of the controller there must be two registers resources specified. Properties like clock-names, reg-io-width, cs-gpio, num-cs, DMA and slave device sub-nodes are optional. Signed-off-by: Serge Semin Cc: Georgy Vlasov Cc: Ramil Zaripov Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Paul Burton Cc: Ralf Baechle Cc: Arnd Bergmann Cc: Allison Randal Cc: Andy Shevchenko Cc: Gareth Williams Cc: linux-mips@vger.kernel.org --- .../bindings/spi/snps,dw-apb-ssi.txt | 44 ------ .../bindings/spi/snps,dw-apb-ssi.yaml | 127 ++++++++++++++++++ .../devicetree/bindings/spi/spi-dw.txt | 24 ---- 3 files changed, 127 insertions(+), 68 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt deleted file mode 100644 index 020e3168ee41..000000000000 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ /dev/null @@ -1,44 +0,0 @@ -Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface. - -Required properties: -- compatible : "snps,dw-apb-ssi" or "mscc,-spi", where soc is "ocelot" or - "jaguar2", or "amazon,alpine-dw-apb-ssi", or "snps,dwc-ssi-1.01a" or - "intel,keembay-ssi" -- reg : The register base for the controller. For "mscc,-spi", a second - register set is required (named ICPU_CFG:SPI_MST) -- interrupts : One interrupt, used by the controller. -- #address-cells : <1>, as required by generic SPI binding. -- #size-cells : <0>, also as required by generic SPI binding. -- clocks : phandles for the clocks, see the description of clock-names below. - The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock - is optional. If a single clock is specified but no clock-name, it is the - "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first. - -Optional properties: -- clock-names : Contains the names of the clocks: - "ssi_clk", for the core clock used to generate the external SPI clock. - "pclk", the interface clock, required for register access. If a clock domain - used to enable this clock then it should be named "pclk_clkdomain". -- cs-gpios : Specifies the gpio pins to be used for chipselects. -- num-cs : The number of chipselects. If omitted, this will default to 4. -- reg-io-width : The I/O register width (in bytes) implemented by this - device. Supported values are 2 or 4 (the default). -- dmas : Phandle + identifiers of Tx and Rx DMA channels. -- dma-names : Contains the names of the DMA channels. Must be "tx" and "rx". - -Child nodes as per the generic SPI binding. - -Example: - - spi@fff00000 { - compatible = "snps,dw-apb-ssi"; - reg = <0xfff00000 0x1000>; - interrupts = <0 154 4>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&spi_m_clk>; - num-cs = <2>; - cs-gpios = <&gpio0 13 0>, - <&gpio0 14 0>; - }; - diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml new file mode 100644 index 000000000000..1fcab6415136 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface + +maintainers: + - Mark Brown + +allOf: + - $ref: "spi-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - mscc,ocelot-spi + - mscc,jaguar2-spi + then: + properties: + reg: + minItems: 2 + +properties: + compatible: + oneOf: + - description: Generic DW SPI Controller + enum: + - snps,dw-apb-ssi + - snps,dwc-ssi-1.01a + - description: Microsemi Ocelot/Jaguar2 SoC SPI Controller + items: + - enum: + - mscc,ocelot-spi + - mscc,jaguar2-spi + - const: snps,dw-apb-ssi + - description: Amazon Alpine SPI Controller + const: amazon,alpine-dw-apb-ssi + - description: Renesas RZ/N1 SPI Controller + items: + - const: renesas,rzn1-spi + - const: snps,dw-apb-ssi + - description: Intel Keem Bay SPI Controller + const: intel,keembay-ssi + + reg: + minItems: 1 + items: + - description: DW APB SSI controller memory mapped registers + - description: SPI MST region map + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: SPI Controller reference clock source + - description: APB interface clock source + + clock-names: + minItems: 1 + items: + - const: ssi_clk + - const: pclk + + reg-io-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: I/O register width (in bytes) implemented by this device + default: 4 + enum: [ 2, 4 ] + + num-cs: + default: 4 + minimum: 1 + maximum: 4 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + properties: + reg: + minimum: 0 + maximum: 3 + + spi-rx-bus-width: + const: 1 + + spi-tx-bus-width: + const: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +examples: + - | + spi@fff00000 { + compatible = "snps,dw-apb-ssi"; + reg = <0xfff00000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 154 4>; + clocks = <&spi_m_clk>; + num-cs = <2>; + cs-gpios = <&gpio0 13 0>, + <&gpio0 14 0>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt deleted file mode 100644 index 7b63ed601990..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-dw.txt +++ /dev/null @@ -1,24 +0,0 @@ -Synopsys DesignWare SPI master - -Required properties: -- compatible: should be "snps,designware-spi" -- #address-cells: see spi-bus.txt -- #size-cells: see spi-bus.txt -- reg: address and length of the spi master registers -- interrupts: should contain one interrupt -- clocks: spi clock phandle -- num-cs: see spi-bus.txt - -Optional properties: -- cs-gpios: see spi-bus.txt - -Example: - -spi: spi@4020a000 { - compatible = "snps,designware-spi"; - interrupts = <11 1>; - reg = <0x4020a000 0x1000>; - clocks = <&pclk>; - num-cs = <2>; - cs-gpios = <&banka 0 0>; -};