| Message ID | 20200527120111.5781-10-Sergey.Semin@baikalelectronics.ru (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | i2c: designeware: Add Baikal-T1 System I2C support | expand |
On Wed, May 27, 2020 at 03:01:09PM +0300, Serge Semin wrote: > Some platforms might need to activate the driver quirks at a very early > probe stage. For instance, Baikal-T1 System I2C doesn't need to map the > registers space as ones belong to the system controller. Instead it will > request the syscon regmap from the parental DT node. In order to be able > to do so let's retrieve the model flags right after the DW I2C private > data is created. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: linux-mips@vger.kernel.org > Cc: devicetree@vger.kernel.org > > --- > > Changelog v3: > - This is a new patch, which has been created due to declining the > glue-layer approach. > --- > drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c > index ca057aa9eac4..ad292de2d260 100644 > --- a/drivers/i2c/busses/i2c-designware-platdrv.c > +++ b/drivers/i2c/busses/i2c-designware-platdrv.c > @@ -124,6 +124,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) > if (!dev) > return -ENOMEM; > > + dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev); > + > dev->base = devm_platform_ioremap_resource(pdev, 0); > if (IS_ERR(dev->base)) > return PTR_ERR(dev->base); > @@ -146,8 +148,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) > > i2c_dw_acpi_adjust_bus_speed(&pdev->dev); > > - dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev); > - > if (pdev->dev.of_node) > dw_i2c_of_configure(pdev); > > -- > 2.26.2 >
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index ca057aa9eac4..ad292de2d260 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -124,6 +124,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) if (!dev) return -ENOMEM; + dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev); + dev->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(dev->base)) return PTR_ERR(dev->base); @@ -146,8 +148,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) i2c_dw_acpi_adjust_bus_speed(&pdev->dev); - dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev); - if (pdev->dev.of_node) dw_i2c_of_configure(pdev);
Some platforms might need to activate the driver quirks at a very early probe stage. For instance, Baikal-T1 System I2C doesn't need to map the registers space as ones belong to the system controller. Instead it will request the syscon regmap from the parental DT node. In order to be able to do so let's retrieve the model flags right after the DW I2C private data is created. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org --- Changelog v3: - This is a new patch, which has been created due to declining the glue-layer approach. --- drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)