From patchwork Wed May 27 15:30:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 11573193 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1299292A for ; Wed, 27 May 2020 15:31:26 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id F410421532 for ; Wed, 27 May 2020 15:31:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389764AbgE0PbS (ORCPT ); Wed, 27 May 2020 11:31:18 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:36752 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389705AbgE0Pa7 (ORCPT ); Wed, 27 May 2020 11:30:59 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id 306F9803083F; Wed, 27 May 2020 15:30:57 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id r_D3vmAu-Nmx; Wed, 27 May 2020 18:30:56 +0300 (MSK) From: Serge Semin To: Jarkko Nikula , Wolfram Sang , Andy Shevchenko , Mika Westerberg CC: Serge Semin , Serge Semin , Alexey Malahov , Thomas Bogendoerfer , Rob Herring , , , , Subject: [PATCH v5 11/11] i2c: designware: Add Baikal-T1 System I2C support Date: Wed, 27 May 2020 18:30:46 +0300 Message-ID: <20200527153046.6172-12-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20200527153046.6172-1-Sergey.Semin@baikalelectronics.ru> References: <20200527153046.6172-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Baikal-T1 System Controller is equipped with a dedicated I2C Controller which functionality is based on the DW APB I2C IP-core, the only difference in a way it' registers are accessed. There are three access register provided in the System Controller registers map, which indirectly address the normal DW APB I2C registers space. So in order to have the Baikal-T1 System I2C Controller supported by the common DW APB I2C driver we created a dedicated Dw I2C controller model quirk, which retrieves the syscon regmap from the parental dt node and creates a new regmap based on it. Signed-off-by: Serge Semin Reviewed-by: Andy Shevchenko Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Rob Herring Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org --- Changelog v3: - This is a new patch, which has been created due to declining the glue-layer approach. Changelog v4: - Use PTR_ERR_OR_ZERO() helper in the bt1_i2c_request_regs() method. --- drivers/i2c/busses/Kconfig | 3 +- drivers/i2c/busses/i2c-designware-core.h | 3 + drivers/i2c/busses/i2c-designware-platdrv.c | 78 ++++++++++++++++++++- 3 files changed, 81 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 259e2325712a..0cf7aea30138 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -541,8 +541,9 @@ config I2C_DESIGNWARE_SLAVE config I2C_DESIGNWARE_PLATFORM tristate "Synopsys DesignWare Platform" - select I2C_DESIGNWARE_CORE depends on (ACPI && COMMON_CLK) || !ACPI + select I2C_DESIGNWARE_CORE + select MFD_SYSCON if MIPS_BAIKAL_T1 help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index f5bbe3d6bcf8..556673a1f61b 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -183,6 +183,7 @@ struct reset_control; * struct dw_i2c_dev - private i2c-designware data * @dev: driver model device node * @map: IO registers map + * @sysmap: System controller registers map * @base: IO registers pointer * @ext: Extended IO registers pointer * @cmd_complete: tx completion indicator @@ -235,6 +236,7 @@ struct reset_control; struct dw_i2c_dev { struct device *dev; struct regmap *map; + struct regmap *sysmap; void __iomem *base; void __iomem *ext; struct completion cmd_complete; @@ -290,6 +292,7 @@ struct dw_i2c_dev { #define ACCESS_NO_IRQ_SUSPEND 0x00000002 #define MODEL_MSCC_OCELOT 0x00000100 +#define MODEL_BAIKAL_BT1 0x00000200 #define MODEL_MASK 0x00000f00 int i2c_dw_init_regmap(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 9d467fa0e163..240348ea9ff9 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -25,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -58,6 +60,63 @@ MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); #endif #ifdef CONFIG_OF +#define BT1_I2C_CTL 0x100 +#define BT1_I2C_CTL_ADDR_MASK GENMASK(7, 0) +#define BT1_I2C_CTL_WR BIT(8) +#define BT1_I2C_CTL_GO BIT(31) +#define BT1_I2C_DI 0x104 +#define BT1_I2C_DO 0x108 + +static int bt1_i2c_read(void *context, unsigned int reg, unsigned int *val) +{ + struct dw_i2c_dev *dev = context; + int ret; + + /* + * Note these methods shouldn't ever fail because the system controller + * registers are memory mapped. We check the return value just in case. + */ + ret = regmap_write(dev->sysmap, BT1_I2C_CTL, + BT1_I2C_CTL_GO | (reg & BT1_I2C_CTL_ADDR_MASK)); + if (ret) + return ret; + + return regmap_read(dev->sysmap, BT1_I2C_DO, val); +} + +static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val) +{ + struct dw_i2c_dev *dev = context; + int ret; + + ret = regmap_write(dev->sysmap, BT1_I2C_DI, val); + if (ret) + return ret; + + return regmap_write(dev->sysmap, BT1_I2C_CTL, + BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK)); +} + +static struct regmap_config bt1_i2c_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .fast_io = true, + .reg_read = bt1_i2c_read, + .reg_write = bt1_i2c_write, + .max_register = DW_IC_COMP_TYPE +}; + +static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) +{ + dev->sysmap = syscon_node_to_regmap(dev->dev->of_node->parent); + if (IS_ERR(dev->sysmap)) + return PTR_ERR(dev->sysmap); + + dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg); + return PTR_ERR_OR_ZERO(dev->map); +} + #define MSCC_ICPU_CFG_TWI_DELAY 0x0 #define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0) #define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4 @@ -90,10 +149,16 @@ static int dw_i2c_of_configure(struct platform_device *pdev) static const struct of_device_id dw_i2c_of_match[] = { { .compatible = "snps,designware-i2c", }, { .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT }, + { .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 }, {}, }; MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #else +static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) +{ + return -ENODEV; +} + static inline int dw_i2c_of_configure(struct platform_device *pdev) { return -ENODEV; @@ -111,10 +176,19 @@ static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev) static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev) { struct platform_device *pdev = to_platform_device(dev->dev); + int ret; - dev->base = devm_platform_ioremap_resource(pdev, 0); + switch (dev->flags & MODEL_MASK) { + case MODEL_BAIKAL_BT1: + ret = bt1_i2c_request_regs(dev); + break; + default: + dev->base = devm_platform_ioremap_resource(pdev, 0); + ret = PTR_ERR_OR_ZERO(dev->base); + break; + } - return PTR_ERR_OR_ZERO(dev->base); + return ret; } static int dw_i2c_plat_probe(struct platform_device *pdev)