diff mbox series

[v7,07/11] dmaengine: dw: Set DMA device max segment size parameter

Message ID 20200709224550.15539-8-Sergey.Semin@baikalelectronics.ru (mailing list archive)
State Not Applicable
Headers show
Series dmaengine: dw: Take Baikal-T1 SoC DW DMAC peculiarities into account | expand

Commit Message

Serge Semin July 9, 2020, 10:45 p.m. UTC 
Maximum block size DW DMAC configuration corresponds to the max segment
size DMA parameter in the DMA core subsystem notation. Lets set it with a
value specific to the probed DW DMA controller. It shall help the DMA
clients to create size-optimized SG-list items for the controller. This in
turn will cause less dw_desc allocations, less LLP reinitializations,
better DMA device performance.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org

---

Changelog v2:
- This is a new patch created in place of the dropped one:
  "dmaengine: dw: Add LLP and block size config accessors".

Changelog v3:
- Use the block_size found for the very first channel instead of looking for
  the maximum of maximum block sizes.
- Don't define device-specific device_dma_parameters object, since it has
  already been defined by the platform device core.
---
 drivers/dma/dw/core.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 33e99d95b3d3..fb95920c429e 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -1229,6 +1229,13 @@  int do_dma_probe(struct dw_dma_chip *chip)
 			     BIT(DMA_MEM_TO_MEM);
 	dw->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 
+	/*
+	 * For now there is no hardware with non uniform maximum block size
+	 * across all of the device channels, so we set the maximum segment
+	 * size as the block size found for the very first channel.
+	 */
+	dma_set_max_seg_size(dw->dma.dev, dw->chan[0].block_size);
+
 	err = dma_async_device_register(&dw->dma);
 	if (err)
 		goto err_dma_register;