diff mbox series

[09/14] mips: bmips: bcm3368: include and use dt-bindings

Message ID 20200812063129.361862-10-noltari@gmail.com (mailing list archive)
State Rejected
Headers show
Series mips: bmips: include dt-bindings headers | expand

Commit Message

Álvaro Fernández Rojas Aug. 12, 2020, 6:31 a.m. UTC
Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm3368.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Comments

Florian Fainelli Aug. 13, 2020, 4:58 p.m. UTC | #1
On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Now that there are proper device tree bindings we can start using them.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
index 69cbef472377..63d844601718 100644
--- a/arch/mips/boot/dts/brcm/bcm3368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -1,4 +1,8 @@ 
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm3368-clock.h"
+#include "dt-bindings/interrupt-controller/bcm3368-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -86,7 +90,7 @@  uart0: serial@fff8c100 {
 			reg = <0xfff8c100 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <2>;
+			interrupts = <BCM3368_IRQ_UART0>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -99,7 +103,7 @@  uart1: serial@fff8c120 {
 			reg = <0xfff8c120 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <3>;
+			interrupts = <BCM3368_IRQ_UART1>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";