@@ -640,6 +640,7 @@ config SGI_IP22
select SYS_SUPPORTS_BIG_ENDIAN
select WAR_R4600_V1_INDEX_ICACHEOP
select WAR_R4600_V1_HIT_CACHEOP
+ select WAR_R4600_V2_HIT_CACHEOP
select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Indy, Challenge S and Indigo2, as well as certain
@@ -877,6 +878,7 @@ config SNI_RM
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select WAR_R4600_V2_HIT_CACHEOP
help
The SNI RM200/300/400 are MIPS-based machines manufactured by
Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
@@ -2643,6 +2645,18 @@ config WAR_R4600_V1_INDEX_ICACHEOP
config WAR_R4600_V1_HIT_CACHEOP
bool
+# Writeback and invalidate the primary cache dcache before DMA.
+#
+# R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
+# Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
+# operate correctly if the internal data cache refill buffer is empty. These
+# CACHE instructions should be separated from any potential data cache miss
+# by a load instruction to an uncached address to empty the response buffer."
+# (Revision 2.0 device errata from IDT available on https://www.idt.com/
+# in .pdf format.)
+config WAR_R4600_V2_HIT_CACHEOP
+ bool
+
#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
@@ -9,7 +9,6 @@
#ifndef __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
#define __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -8,7 +8,6 @@
#ifndef __ASM_MACH_GENERIC_WAR_H
#define __ASM_MACH_GENERIC_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -8,11 +8,6 @@
#ifndef __ASM_MIPS_MACH_IP22_WAR_H
#define __ASM_MIPS_MACH_IP22_WAR_H
-/*
- * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors.
- */
-
-#define R4600_V2_HIT_CACHEOP_WAR 1
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -8,7 +8,6 @@
#ifndef __ASM_MIPS_MACH_IP27_WAR_H
#define __ASM_MIPS_MACH_IP27_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -8,7 +8,6 @@
#ifndef __ASM_MIPS_MACH_IP28_WAR_H
#define __ASM_MIPS_MACH_IP28_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -5,7 +5,6 @@
#ifndef __ASM_MIPS_MACH_IP30_WAR_H
#define __ASM_MIPS_MACH_IP30_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -8,7 +8,6 @@
#ifndef __ASM_MIPS_MACH_IP32_WAR_H
#define __ASM_MIPS_MACH_IP32_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -8,7 +8,6 @@
#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
#define __ASM_MIPS_MACH_MIPS_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 1
@@ -8,7 +8,6 @@
#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
#define __ASM_MIPS_MACH_MIPS_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 1
@@ -8,11 +8,6 @@
#ifndef __ASM_MIPS_MACH_RM_WAR_H
#define __ASM_MIPS_MACH_RM_WAR_H
-/*
- * The RM200C seems to have been shipped only with V2.0 R4600s
- */
-
-#define R4600_V2_HIT_CACHEOP_WAR 1
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -8,8 +8,6 @@
#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H
#define __ASM_MIPS_MACH_SIBYTE_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
-
#if defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
#ifndef __ASSEMBLY__
@@ -8,7 +8,6 @@
#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H
#define __ASM_MIPS_MACH_TX49XX_WAR_H
-#define R4600_V2_HIT_CACHEOP_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
@@ -72,21 +72,6 @@
#define DADDI_WAR 0
#endif
-/*
- * Writeback and invalidate the primary cache dcache before DMA.
- *
- * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
- * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
- * operate correctly if the internal data cache refill buffer is empty. These
- * CACHE instructions should be separated from any potential data cache miss
- * by a load instruction to an uncached address to empty the response buffer."
- * (Revision 2.0 device errata from IDT available on https://www.idt.com/
- * in .pdf format.)
- */
-#ifndef R4600_V2_HIT_CACHEOP_WAR
-#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform
-#endif
-
/*
* Workaround for the Sibyte M3 errata the text of which can be found at
*
@@ -130,7 +130,8 @@ struct bcache_ops *bcops = &no_sc_ops;
#define R4600_HIT_CACHEOP_WAR_IMPL \
do { \
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) \
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) && \
+ cpu_is_r4600_v2_x()) \
*(volatile unsigned long *)CKSEG1; \
if (IS_ENABLED(CONFIG_WAR_R4600_V1_HIT_CACHEOP)) \
__asm__ __volatile__("nop;nop;nop;nop"); \
@@ -258,7 +258,8 @@ static inline void build_clear_pref(u32 **buf, int off)
uasm_i_nop(buf);
}
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) &&
+ cpu_is_r4600_v2_x())
uasm_i_lw(buf, ZERO, ZERO, AT);
uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
@@ -303,7 +304,7 @@ void build_clear_page(void)
else
uasm_i_ori(&buf, A2, A0, off);
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, uasm_rel_hi(0xa0000000));
off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
@@ -411,7 +412,8 @@ static inline void build_copy_store_pref(u32 **buf, int off)
uasm_i_nop(buf);
}
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) &&
+ cpu_is_r4600_v2_x())
uasm_i_lw(buf, ZERO, ZERO, AT);
uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
@@ -455,7 +457,7 @@ void build_copy_page(void)
else
uasm_i_ori(&buf, A2, A0, off);
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ if (IS_ENABLED(CONFIG_WAR_R4600_V2_HIT_CACHEOP) && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, uasm_rel_hi(0xa0000000));
off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
Use a new config option to enable R4600 V2 cacheop hit workaround and remove define from different war.h files. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> --- arch/mips/Kconfig | 14 ++++++++++++++ arch/mips/include/asm/mach-cavium-octeon/war.h | 1 - arch/mips/include/asm/mach-generic/war.h | 1 - arch/mips/include/asm/mach-ip22/war.h | 5 ----- arch/mips/include/asm/mach-ip27/war.h | 1 - arch/mips/include/asm/mach-ip28/war.h | 1 - arch/mips/include/asm/mach-ip30/war.h | 1 - arch/mips/include/asm/mach-ip32/war.h | 1 - arch/mips/include/asm/mach-malta/war.h | 1 - arch/mips/include/asm/mach-rc32434/war.h | 1 - arch/mips/include/asm/mach-rm/war.h | 5 ----- arch/mips/include/asm/mach-sibyte/war.h | 2 -- arch/mips/include/asm/mach-tx49xx/war.h | 1 - arch/mips/include/asm/war.h | 15 --------------- arch/mips/mm/c-r4k.c | 3 ++- arch/mips/mm/page.c | 10 ++++++---- 16 files changed, 22 insertions(+), 41 deletions(-)