new file mode 100644
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 Microsemi Corporation */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mscc,luton";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ device_type = "cpu";
+ clocks = <&cpu_clk>;
+ reg = <0>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ cpu_clk: cpu-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <416666666>;
+ };
+
+ ahb_clk: ahb-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&cpu_clk>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ ahb@60000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x60000000 0x20000000>;
+
+ interrupt-parent = <&intc>;
+
+ cpu_ctrl: syscon@10000000 {
+ compatible = "mscc,ocelot-cpu-syscon", "syscon";
+ reg = <0x10000000 0x2c>;
+ };
+
+ intc: interrupt-controller@10000084 {
+ compatible = "mscc,luton-icpu-intr";
+ reg = <0x10000084 0x70>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ uart0: serial@10100000 {
+ pinctrl-0 = <&uart_pins>;
+ pinctrl-names = "default";
+ compatible = "ns16550a";
+ reg = <0x10100000 0x20>;
+ interrupts = <6>;
+ clocks = <&ahb_clk>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ i2c0: i2c@10100400 {
+ compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+ pinctrl-0 = <&i2c_pins>;
+ pinctrl-names = "default";
+ reg = <0x10100400 0x100>, <0x100002a4 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <11>;
+ clocks = <&ahb_clk>;
+
+ status = "disabled";
+ };
+
+ gpio: pinctrl@70068 {
+ compatible = "mscc,luton-pinctrl";
+ reg = <0x70068 0x28>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 0 32>;
+ interrupt-controller;
+ interrupts = <13>;
+ #interrupt-cells = <2>;
+
+ i2c_pins: i2c-pins {
+ pins = "GPIO_5", "GPIO_6";
+ function = "twi";
+ };
+
+ uart_pins: uart-pins {
+ pins = "GPIO_30", "GPIO_31";
+ function = "uart";
+ };
+
+ };
+ };
+};
Add a device tree include file for the Microsemi Luton SoC which belongs to same family of the Ocelot SoC. It is based on the work of Lars Povlsen <lars.povlsen@microchip.com>. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- arch/mips/boot/dts/mscc/luton.dtsi | 116 +++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 arch/mips/boot/dts/mscc/luton.dtsi