diff mbox series

[6/7] staging: mt7621-dts: make use of new 'mt7621-pll' and 'mt7621-clk'

Message ID 20201111163013.29412-7-sergio.paracuellos@gmail.com (mailing list archive)
State Superseded
Headers show
Series MIPS: ralink: add CPU clock detection and clock gate driver for MT7621 | expand

Commit Message

Sergio Paracuellos Nov. 11, 2020, 4:30 p.m. UTC
Clocks for SoC mt7621 have been properly integrated so there is
no need to declare fixed clocks at all in the device tree. Remove
all of them, add new device tree nodes for new mt7621-pll and mt7621-clk
and update the rest of the nodes to use them.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/staging/mt7621-dts/gbpc1.dts   | 11 ----
 drivers/staging/mt7621-dts/mt7621.dtsi | 71 ++++++++++++--------------
 2 files changed, 34 insertions(+), 48 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts
index a7c0d3115d72..7716d0efe524 100644
--- a/drivers/staging/mt7621-dts/gbpc1.dts
+++ b/drivers/staging/mt7621-dts/gbpc1.dts
@@ -100,17 +100,6 @@  partition@50000 {
 	};
 };
 
-&sysclock {
-			compatible = "fixed-clock";
-			/* This is normally 1/4 of cpuclock */
-			clock-frequency = <225000000>;
-};
-
-&cpuclock {
-			compatible = "fixed-clock";
-			clock-frequency = <900000000>;
-};
-
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_pins>;
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 82aa93634eda..e615139d2ccb 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -1,5 +1,6 @@ 
 #include <dt-bindings/interrupt-controller/mips-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/mt7621-clk.h>
 
 / {
 	#address-cells = <1>;
@@ -27,26 +28,16 @@  aliases {
 		serial0 = &uartlite;
 	};
 
-	cpuclock: cpuclock@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-
-		/* FIXME: there should be way to detect this */
-		clock-frequency = <880000000>;
-	};
-
-	sysclock: sysclock@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-
-		/* This is normally 1/4 of cpuclock */
-		clock-frequency = <220000000>;
+	pll: pll {
+		compatible = "mediatek,mt7621-pll";
+		#clock-cells = <1>;
+		clock-output-names = "cpu", "ahb", "apb";
 	};
 
-	mmc_clock: mmc_clock@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <48000000>;
+	clkctrl: clkctrl {
+		compatible = "mediatek,mt7621-clk";
+		#clock-cells = <1>;
+		ralink,sysctl = <&sysc>;
 	};
 
 	mmc_fixed_3v3: fixedregulator@0 {
@@ -76,7 +67,7 @@  palmbus: palmbus@1E000000 {
 		#size-cells = <1>;
 
 		sysc: sysc@0 {
-			compatible = "mtk,mt7621-sysc";
+			compatible = "mtk,mt7621-sysc", "syscon";
 			reg = <0x0 0x100>;
 		};
 
@@ -100,8 +91,8 @@  i2c: i2c@900 {
 			compatible = "mediatek,mt7621-i2c";
 			reg = <0x900 0x100>;
 
-			clocks = <&sysclock>;
-
+			clocks = <&clkctrl MT7621_CLK_I2C>;
+			clock-names = "i2c";
 			resets = <&rstctrl 16>;
 			reset-names = "i2c";
 
@@ -118,8 +109,8 @@  i2s: i2s@a00 {
 			compatible = "mediatek,mt7621-i2s";
 			reg = <0xa00 0x100>;
 
-			clocks = <&sysclock>;
-
+			clocks = <&clkctrl MT7621_CLK_I2S>;
+			clock-names = "i2s";
 			resets = <&rstctrl 17>;
 			reset-names = "i2s";
 
@@ -155,8 +146,8 @@  uartlite: uartlite@c00 {
 			compatible = "ns16550a";
 			reg = <0xc00 0x100>;
 
-			clocks = <&sysclock>;
-			clock-frequency = <50000000>;
+			clocks = <&clkctrl MT7621_CLK_UART1>;
+			clock-names = "uart1";
 
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -172,7 +163,7 @@  spi0: spi@b00 {
 			compatible = "ralink,mt7621-spi";
 			reg = <0xb00 0x100>;
 
-			clocks = <&sysclock>;
+			clocks = <&pll MT7621_CLK_AHB>;
 
 			resets = <&rstctrl 18>;
 			reset-names = "spi";
@@ -188,6 +179,8 @@  gdma: gdma@2800 {
 			compatible = "ralink,rt3883-gdma";
 			reg = <0x2800 0x800>;
 
+			clocks = <&clkctrl MT7621_CLK_GDMA>;
+			clock-names = "gdma";
 			resets = <&rstctrl 14>;
 			reset-names = "dma";
 
@@ -205,6 +198,8 @@  hsdma: hsdma@7000 {
 			compatible = "mediatek,mt7621-hsdma";
 			reg = <0x7000 0x1000>;
 
+			clocks = <&clkctrl MT7621_CLK_HSDMA>;
+			clock-names = "hsdma";
 			resets = <&rstctrl 5>;
 			reset-names = "hsdma";
 
@@ -315,11 +310,6 @@  rstctrl: rstctrl {
 		#reset-cells = <1>;
 	};
 
-	clkctrl: clkctrl {
-		compatible = "ralink,rt2880-clock";
-		#clock-cells = <1>;
-	};
-
 	sdhci: sdhci@1E130000 {
 		status = "disabled";
 
@@ -338,7 +328,8 @@  sdhci: sdhci@1E130000 {
 		pinctrl-0 = <&sdhci_pins>;
 		pinctrl-1 = <&sdhci_pins>;
 
-		clocks = <&mmc_clock &mmc_clock>;
+		clocks = <&pll MT7621_CLK_APB>,
+			 <&pll MT7621_CLK_APB>;
 		clock-names = "source", "hclk";
 
 		interrupt-parent = <&gic>;
@@ -353,7 +344,7 @@  xhci: xhci@1E1C0000 {
 		       0x1e1d0700 0x0100>;
 		reg-names = "mac", "ippc";
 
-		clocks = <&sysclock>;
+		clocks = <&pll MT7621_CLK_AHB>;
 		clock-names = "sys_ck";
 
 		interrupt-parent = <&gic>;
@@ -372,7 +363,7 @@  gic: interrupt-controller@1fbc0000 {
 		timer {
 			compatible = "mti,gic-timer";
 			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
-			clocks = <&cpuclock>;
+			clocks = <&pll MT7621_CLK_CPU>;
 		};
 	};
 
@@ -385,6 +376,9 @@  nand: nand@1e003000 {
 			0x1e003800 0x800>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		clocks = <&clkctrl MT7621_CLK_NAND>;
+		clock-names = "nand";
 	};
 
 	ethsys: syscon@1e000000 {
@@ -398,8 +392,9 @@  ethernet: ethernet@1e100000 {
 		compatible = "mediatek,mt7621-eth";
 		reg = <0x1e100000 0x10000>;
 
-		clocks = <&sysclock>;
-		clock-names = "ethif";
+		clocks = <&pll MT7621_CLK_AHB>,
+			 <&clkctrl MT7621_CLK_ETH>;
+		clock-names = "ethif", "eth";
 
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -532,7 +527,9 @@  GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
 
 		resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
 		reset-names = "pcie0", "pcie1", "pcie2";
-		clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
+		clocks = <&clkctrl MT7621_CLK_PCIE0>,
+			 <&clkctrl MT7621_CLK_PCIE1>,
+			 <&clkctrl MT7621_CLK_PCIE2>;
 		clock-names = "pcie0", "pcie1", "pcie2";
 		phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
 		phy-names = "pcie-phy0", "pcie-phy2";