@@ -381,6 +381,7 @@ source "drivers/clk/mediatek/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/qcom/Kconfig"
+source "drivers/clk/ralink/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/rockchip/Kconfig"
source "drivers/clk/samsung/Kconfig"
@@ -101,6 +101,7 @@ obj-$(CONFIG_COMMON_CLK_NXP) += nxp/
obj-$(CONFIG_MACH_PISTACHIO) += pistachio/
obj-$(CONFIG_COMMON_CLK_PXA) += pxa/
obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
+obj-y += ralink/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
new file mode 100644
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# MediaTek Mt7621 Clock Driver
+#
+menu "Clock driver for Mediatek mt7621 SoC"
+ depends on SOC_MT7621
+
+config CLK_MT7621
+ bool "Clock driver for MediaTek MT7621"
+ depends on SOC_MT7621
+ default SOC_MT7621
+ help
+ This driver supports MediaTek MT7621 basic clocks.
+endmenu
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CLK_MT7621) += clk-mt7621.o
new file mode 100644
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mediatek MT7621 Clock Driver
+ * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <dt-bindings/clock/mt7621-clk.h>
+
+/* Configuration registers */
+#define SYSC_REG_SYSTEM_CONFIG0 0x10
+#define SYSC_REG_SYSTEM_CONFIG1 0x14
+#define SYSC_REG_CLKCFG0 0x2c
+#define SYSC_REG_CLKCFG1 0x30
+#define SYSC_REG_CUR_CLK_STS 0x44
+
+#define MEMC_REG_CPU_PLL 0x648
+#define XTAL_MODE_SEL_MASK 0x7
+#define XTAL_MODE_SEL_SHIFT 6
+
+#define CPU_CLK_SEL_MASK 0x3
+#define CPU_CLK_SEL_SHIFT 30
+
+#define CUR_CPU_FDIV_MASK 0x1f
+#define CUR_CPU_FDIV_SHIFT 8
+#define CUR_CPU_FFRAC_MASK 0x1f
+#define CUR_CPU_FFRAC_SHIFT 0
+
+#define CPU_PLL_PREDIV_MASK 0x3
+#define CPU_PLL_PREDIV_SHIFT 12
+#define CPU_PLL_FBDIV_MASK 0x7f
+#define CPU_PLL_FBDIV_SHIFT 4
+
+struct mt7621_clk {
+ struct clk_hw hw;
+};
+
+struct mt7621_fixed_clk {
+ u8 idx;
+ const char *name;
+ const char *parent_name;
+ unsigned long rate;
+ struct clk_hw *hw;
+};
+
+struct mt7621_gate {
+ u8 idx;
+ const char *name;
+ const char *parent_name;
+ u32 bit_idx;
+ struct clk_hw hw;
+};
+
+#define GATE(_id, _name, _pname, _shift) \
+ { \
+ .idx = _id, \
+ .name = _name, \
+ .parent_name = _pname, \
+ .bit_idx = _shift \
+ }
+
+static struct mt7621_gate mt7621_gates[] = {
+ GATE(MT7621_CLK_HSDMA, "hsdma", "150m", BIT(5)),
+ GATE(MT7621_CLK_FE, "fe", "250m", BIT(6)),
+ GATE(MT7621_CLK_SP_DIVTX, "sp_divtx", "270m", BIT(7)),
+ GATE(MT7621_CLK_TIMER, "timer", "50m", BIT(8)),
+ GATE(MT7621_CLK_PCM, "pcm", "270m", BIT(11)),
+ GATE(MT7621_CLK_PIO, "pio", "50m", BIT(13)),
+ GATE(MT7621_CLK_GDMA, "gdma", "bus", BIT(14)),
+ GATE(MT7621_CLK_NAND, "nand", "125m", BIT(15)),
+ GATE(MT7621_CLK_I2C, "i2c", "50m", BIT(16)),
+ GATE(MT7621_CLK_I2S, "i2s", "270m", BIT(17)),
+ GATE(MT7621_CLK_SPI, "spi", "bus", BIT(18)),
+ GATE(MT7621_CLK_UART1, "uart1", "50m", BIT(19)),
+ GATE(MT7621_CLK_UART2, "uart2", "50m", BIT(20)),
+ GATE(MT7621_CLK_UART3, "uart3", "50m", BIT(21)),
+ GATE(MT7621_CLK_ETH, "eth", "50m", BIT(23)),
+ GATE(MT7621_CLK_PCIE0, "pcie0", "125m", BIT(24)),
+ GATE(MT7621_CLK_PCIE1, "pcie1", "125m", BIT(25)),
+ GATE(MT7621_CLK_PCIE2, "pcie2", "125m", BIT(26)),
+ GATE(MT7621_CLK_CRYPTO, "crypto", "250m", BIT(29)),
+ GATE(MT7621_CLK_SHXC, "shxc", "50m", BIT(30))
+};
+
+static inline struct mt7621_gate *to_mt7621_gate(struct clk_hw *hw)
+{
+ return container_of(hw, struct mt7621_gate, hw);
+}
+
+static int mt7621_gate_enable(struct clk_hw *hw)
+{
+ struct mt7621_gate *clk_gate = to_mt7621_gate(hw);
+
+ rt_sysc_m32(0, BIT(clk_gate->bit_idx), SYSC_REG_CLKCFG1);
+ return 0;
+}
+
+static void mt7621_gate_disable(struct clk_hw *hw)
+{
+ struct mt7621_gate *clk_gate = to_mt7621_gate(hw);
+
+ rt_sysc_m32(BIT(clk_gate->bit_idx), 0, SYSC_REG_CLKCFG1);
+}
+
+static int mt7621_gate_is_enabled(struct clk_hw *hw)
+{
+ struct mt7621_gate *clk_gate = to_mt7621_gate(hw);
+ u32 val = rt_sysc_r32(SYSC_REG_CLKCFG1);
+
+ return !!(val & BIT(clk_gate->bit_idx));
+}
+
+static const struct clk_ops mt7621_gate_ops = {
+ .enable = mt7621_gate_enable,
+ .disable = mt7621_gate_disable,
+ .is_enabled = mt7621_gate_is_enabled,
+};
+
+static int mt7621_gate_ops_init(struct device_node *np,
+ struct mt7621_gate *sclk)
+{
+ struct clk_init_data init = {
+ .flags = CLK_SET_RATE_PARENT,
+ .num_parents = 1,
+ .parent_names = &sclk->parent_name,
+ .ops = &mt7621_gate_ops,
+ .name = sclk->name,
+ };
+
+ sclk->hw.init = &init;
+ return of_clk_hw_register(np, &sclk->hw);
+}
+
+static int mt7621_register_gates(struct device_node *np,
+ struct clk_hw_onecell_data *clk_data)
+{
+ struct clk_hw **hws = clk_data->hws;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(mt7621_gates); i++) {
+ struct mt7621_gate *sclk = &mt7621_gates[i];
+
+ ret = mt7621_gate_ops_init(np, sclk);
+ if (ret) {
+ pr_err("Couldn't register clock %s\n", sclk->name);
+ goto err_clk_unreg;
+ }
+
+ hws[sclk->idx] = &sclk->hw;
+ }
+
+ return 0;
+
+err_clk_unreg:
+ while (--i >= 0) {
+ struct mt7621_gate *sclk = &mt7621_gates[i];
+
+ clk_hw_unregister(&sclk->hw);
+ }
+ return ret;
+}
+
+#define FIXED(_id, _name, _rate) \
+ { \
+ .idx = _id, \
+ .name = _name, \
+ .parent_name = "xtal", \
+ .rate = _rate \
+ }
+
+static struct mt7621_fixed_clk mt7621_fixed_clks[] = {
+ FIXED(MT7621_CLK_50M, "50m", 50000000),
+ FIXED(MT7621_CLK_125M, "125m", 125000000),
+ FIXED(MT7621_CLK_150M, "150m", 150000000),
+ FIXED(MT7621_CLK_250M, "250m", 250000000),
+ FIXED(MT7621_CLK_270M, "270m", 270000000),
+};
+
+static int mt7621_register_fixed_clocks(struct clk_hw_onecell_data *clk_data)
+{
+ struct clk_hw **hws = clk_data->hws;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(mt7621_fixed_clks); i++) {
+ struct mt7621_fixed_clk *sclk = &mt7621_fixed_clks[i];
+
+ sclk->hw = clk_hw_register_fixed_rate(NULL, sclk->name,
+ sclk->parent_name, 0,
+ sclk->rate);
+ if (IS_ERR(sclk->hw)) {
+ pr_err("Couldn't register clock %s\n", sclk->name);
+ ret = PTR_ERR(sclk->hw);
+ goto err_clk_unreg;
+ }
+
+ hws[sclk->idx] = sclk->hw;
+ }
+
+ return 0;
+
+err_clk_unreg:
+ while (--i >= 0) {
+ struct mt7621_fixed_clk *sclk = &mt7621_fixed_clks[i];
+
+ clk_hw_unregister_fixed_rate(sclk->hw);
+ }
+ return ret;
+}
+
+static unsigned long mt7621_xtal_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 val;
+
+ val = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+ val = (val >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
+
+ if (val <= 2)
+ return 20000000;
+ if (val <= 5)
+ return 40000000;
+
+ return 25000000;
+}
+
+static unsigned long mt7621_cpu_recalc_rate(struct clk_hw *hw,
+ unsigned long xtal_clk)
+{
+ static const u32 prediv_tbl[] = { 0, 1, 2, 2 };
+ u32 clkcfg, clk_sel, curclk, ffiv, ffrac;
+ u32 pll, prediv, fbdiv;
+ unsigned long cpu_clk;
+
+ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
+ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
+
+ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
+ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
+
+ switch (clk_sel) {
+ case 0:
+ cpu_clk = 500000000;
+ break;
+ case 1:
+ pll = rt_memc_r32(MEMC_REG_CPU_PLL);
+ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
+ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
+ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
+ break;
+ default:
+ cpu_clk = xtal_clk;
+ }
+
+ return cpu_clk / ffiv * ffrac;
+}
+
+static unsigned long mt7621_bus_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return parent_rate / 4;
+}
+
+#define CLK_BASE(_name, _parent, _recalc) { \
+ .init = &(struct clk_init_data) { \
+ .name = _name, \
+ .ops = &(const struct clk_ops) { \
+ .recalc_rate = _recalc, \
+ }, \
+ .parent_data = &(const struct clk_parent_data) { \
+ .name = _parent, \
+ .fw_name = _parent \
+ }, \
+ .num_parents = _parent ? 1 : 0 \
+ }, \
+}
+
+static struct mt7621_clk mt7621_clks_base[] = {
+ { CLK_BASE("xtal", NULL, mt7621_xtal_recalc_rate) },
+ { CLK_BASE("cpu", "xtal", mt7621_cpu_recalc_rate) },
+ { CLK_BASE("bus", "cpu", mt7621_bus_recalc_rate) },
+};
+
+static int mt7621_register_top_clocks(struct device_node *np,
+ struct clk_hw_onecell_data *clk_data)
+{
+ struct clk_hw **hws = clk_data->hws;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(mt7621_clks_base); i++) {
+ struct mt7621_clk *sclk = &mt7621_clks_base[i];
+
+ ret = of_clk_hw_register(np, &sclk->hw);
+ if (ret) {
+ pr_err("Couldn't register top clock %i\n", i);
+ goto err_clk_unreg;
+ }
+
+ hws[i] = &sclk->hw;
+ }
+
+ return 0;
+
+err_clk_unreg:
+ while (--i >= 0) {
+ struct mt7621_clk *sclk = &mt7621_clks_base[i];
+
+ clk_hw_unregister(&sclk->hw);
+ }
+ return ret;
+}
+
+static int mt7621_prepare_enable_clocks(struct clk_hw_onecell_data *clk_data)
+{
+ int ret, i;
+
+ for (i = 0; i < MT7621_CLK_MAX; i++) {
+ ret = clk_prepare_enable(clk_data->hws[i]->clk);
+ if (ret) {
+ pr_err("failed to enable clk: %d\n", ret);
+ goto err_clk_disable;
+ }
+ }
+
+ return 0;
+
+err_clk_disable:
+ while (--i >= 0)
+ clk_disable_unprepare(clk_data->hws[i]->clk);
+ return ret;
+}
+
+static void __init mt7621_clk_init(struct device_node *node)
+{
+ struct clk_hw_onecell_data *clk_data;
+ int ret, i, count;
+
+ count = ARRAY_SIZE(mt7621_clks_base) +
+ ARRAY_SIZE(mt7621_fixed_clks) + ARRAY_SIZE(mt7621_gates);
+ clk_data = kzalloc(struct_size(clk_data, hws, count), GFP_KERNEL);
+ if (!clk_data)
+ return;
+
+ ret = mt7621_register_top_clocks(node, clk_data);
+ if (ret) {
+ pr_err("Couldn't register top clocks\n");
+ goto free_clk_data;
+ }
+
+ ret = mt7621_register_fixed_clocks(clk_data);
+ if (ret) {
+ pr_err("Couldn't register fixed clocks\n");
+ goto unreg_clk_top;
+ }
+
+ ret = mt7621_register_gates(node, clk_data);
+ if (ret) {
+ pr_err("Couldn't register fixed clock gates\n");
+ goto unreg_clk_fixed;
+ }
+
+ clk_data->num = count;
+
+ ret = mt7621_prepare_enable_clocks(clk_data);
+ if (ret) {
+ pr_err("Couldn't register fixed clock gates\n");
+ goto unreg_clk_gates;
+ }
+
+ ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+ if (ret) {
+ pr_err("Couldn't add clk hw provider\n");
+ goto disable_clks;
+ }
+
+ return;
+
+disable_clks:
+ for (i = 0; i < MT7621_CLK_MAX; i++)
+ clk_disable_unprepare(clk_data->hws[i]->clk);
+
+unreg_clk_gates:
+ for (i = 0; i < ARRAY_SIZE(mt7621_gates); i++) {
+ struct mt7621_gate *sclk = &mt7621_gates[i];
+
+ clk_hw_unregister(&sclk->hw);
+ }
+
+unreg_clk_fixed:
+ for (i = 0; i < ARRAY_SIZE(mt7621_fixed_clks); i++) {
+ struct mt7621_fixed_clk *sclk = &mt7621_fixed_clks[i];
+
+ clk_hw_unregister_fixed_rate(sclk->hw);
+ }
+
+unreg_clk_top:
+ for (i = 0; i < ARRAY_SIZE(mt7621_clks_base); i++) {
+ struct mt7621_clk *sclk = &mt7621_clks_base[i];
+
+ clk_hw_unregister(&sclk->hw);
+ }
+
+free_clk_data:
+ kfree(clk_data);
+}
+
+CLK_OF_DECLARE(mt7621_clk, "mediatek,mt7621-clk", mt7621_clk_init);
The documentation for this SOC only talks about two registers regarding to the clocks: * SYSC_REG_CPLL_CLKCFG0 - provides some information about boostrapped refclock. PLL and dividers used for CPU and some sort of BUS. * SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable clocks for all or some ip cores. Looking into driver code, and some openWRT patched there are another frequencies which are used in some drivers (uart, sd...). According to all of this information the clock plan for this SoC is set as follows: - Main top clock "xtal" from where all the rest of the world is derived. - CPU clock "cpu" derived from "xtal" frequencies and a bunch of register reads and predividers. - BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz. - Fixed clocks from "xtal": * "50m": 50 MHz. * "125m": 125 MHz. * "150m": 150 MHz. * "250m": 250 MHz. * "270m": 270 MHz. We also have a buch of gate clocks with their parents: * "hsdma": "150m" * "fe": "250m" * "sp_divtx": "270m" * "timer": "50m" * "pcm": "270m" * "pio": "50m" * "gdma": "bus" * "nand": "125m" * "i2c": "50m" * "i2s": "270m" * "spi": "bus" * "uart1": "50m" * "uart2": "50m" * "uart3": "50m" * "eth": "50m" * "pcie0": "125m" * "pcie1": "125m" * "pcie2": "125m" * "crypto": "250m" * "shxc": "50m" With this information the clk driver will provide clock and gates functionality from a a set of hardcoded clocks allowing to define a nice device tree without fixed clocks. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> --- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/ralink/Kconfig | 14 ++ drivers/clk/ralink/Makefile | 2 + drivers/clk/ralink/clk-mt7621.c | 411 ++++++++++++++++++++++++++++++++ 5 files changed, 429 insertions(+) create mode 100644 drivers/clk/ralink/Kconfig create mode 100644 drivers/clk/ralink/Makefile create mode 100644 drivers/clk/ralink/clk-mt7621.c