| Message ID | 20210307192830.208245-2-paul@crapouillou.net (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | c5a210453cf5c9140947533168077f518a01b4cd |
| Headers | show |
| Series | [1/2] dt-bindings: panel/kingdisplay,kd035g6-54nt: Remove spi-cs-high | expand |
On Sun, Mar 07, 2021 at 07:28:30PM +0000, Paul Cercueil wrote: > The NT39016 panel is a fun beast, even though the documentation states > that the CS line is active-low, it will work just fine if the CS line is > configured as active-high, but it won't work if the CS line is forced > low or forced high. > > Since it did actually work with the spi-cs-high property, this is not a > bugfix, but we should nonetheless remove that property to match the > documentation. > > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > arch/mips/boot/dts/ingenic/gcw0.dts | 1 - > 1 file changed, 1 deletion(-) applied to mips-next. Thomas.
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts index bc72304a2440..f4c04f2263ea 100644 --- a/arch/mips/boot/dts/ingenic/gcw0.dts +++ b/arch/mips/boot/dts/ingenic/gcw0.dts @@ -345,7 +345,6 @@ nt39016@0 { spi-max-frequency = <3125000>; spi-3wire; - spi-cs-high; reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
The NT39016 panel is a fun beast, even though the documentation states that the CS line is active-low, it will work just fine if the CS line is configured as active-high, but it won't work if the CS line is forced low or forced high. Since it did actually work with the spi-cs-high property, this is not a bugfix, but we should nonetheless remove that property to match the documentation. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- arch/mips/boot/dts/ingenic/gcw0.dts | 1 - 1 file changed, 1 deletion(-)