diff mbox series

[v12,2/4] staging: mt7621-dts: make use of new 'mt7621-clk'

Message ID 20210409192024.10024-3-sergio.paracuellos@gmail.com (mailing list archive)
State Superseded
Headers show
Series MIPS: ralink: add CPU clock detection and clock driver for MT7621 | expand

Commit Message

Sergio Paracuellos April 9, 2021, 7:20 p.m. UTC
Clocks for SoC mt7621 have been properly integrated so there is
no need to declare fixed clocks at all in the device tree. Remove
all of them, add new device tree nodes for mt7621-clk and update
the rest of the nodes to use them.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/staging/mt7621-dts/gbpc1.dts   | 11 ----
 drivers/staging/mt7621-dts/mt7621.dtsi | 74 ++++++++++++--------------
 2 files changed, 33 insertions(+), 52 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts
index a7c0d3115d72..7716d0efe524 100644
--- a/drivers/staging/mt7621-dts/gbpc1.dts
+++ b/drivers/staging/mt7621-dts/gbpc1.dts
@@ -100,17 +100,6 @@  partition@50000 {
 	};
 };
 
-&sysclock {
-			compatible = "fixed-clock";
-			/* This is normally 1/4 of cpuclock */
-			clock-frequency = <225000000>;
-};
-
-&cpuclock {
-			compatible = "fixed-clock";
-			clock-frequency = <900000000>;
-};
-
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_pins>;
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 16fc94f65486..b68183e7e6ad 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -1,5 +1,6 @@ 
 #include <dt-bindings/interrupt-controller/mips-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/mt7621-clk.h>
 
 / {
 	#address-cells = <1>;
@@ -27,27 +28,6 @@  aliases {
 		serial0 = &uartlite;
 	};
 
-	cpuclock: cpuclock@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-
-		/* FIXME: there should be way to detect this */
-		clock-frequency = <880000000>;
-	};
-
-	sysclock: sysclock@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-
-		/* This is normally 1/4 of cpuclock */
-		clock-frequency = <220000000>;
-	};
-
-	mmc_clock: mmc_clock@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <48000000>;
-	};
 
 	mmc_fixed_3v3: fixedregulator@0 {
 		compatible = "regulator-fixed";
@@ -76,8 +56,13 @@  palmbus: palmbus@1E000000 {
 		#size-cells = <1>;
 
 		sysc: sysc@0 {
-			compatible = "mtk,mt7621-sysc";
+			compatible = "mtk,mt7621-sysc", "syscon";
 			reg = <0x0 0x100>;
+			#clock-cells = <1>;
+			ralink,memctl = <&memc>;
+			clock-output-names = "xtal", "cpu", "bus",
+					     "50m", "125m", "150m",
+					     "250m", "270m";
 		};
 
 		wdt: wdt@100 {
@@ -101,8 +86,8 @@  i2c: i2c@900 {
 			compatible = "mediatek,mt7621-i2c";
 			reg = <0x900 0x100>;
 
-			clocks = <&sysclock>;
-
+			clocks = <&sysc MT7621_CLK_I2C>;
+			clock-names = "i2c";
 			resets = <&rstctrl 16>;
 			reset-names = "i2c";
 
@@ -119,8 +104,8 @@  i2s: i2s@a00 {
 			compatible = "mediatek,mt7621-i2s";
 			reg = <0xa00 0x100>;
 
-			clocks = <&sysclock>;
-
+			clocks = <&sysc MT7621_CLK_I2S>;
+			clock-names = "i2s";
 			resets = <&rstctrl 17>;
 			reset-names = "i2s";
 
@@ -138,7 +123,7 @@  i2s: i2s@a00 {
 		};
 
 		memc: memc@5000 {
-			compatible = "mtk,mt7621-memc";
+			compatible = "mtk,mt7621-memc", "syscon";
 			reg = <0x5000 0x1000>;
 		};
 
@@ -156,8 +141,8 @@  uartlite: uartlite@c00 {
 			compatible = "ns16550a";
 			reg = <0xc00 0x100>;
 
-			clocks = <&sysclock>;
-			clock-frequency = <50000000>;
+			clocks = <&sysc MT7621_CLK_UART1>;
+			clock-names = "uart1";
 
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -173,7 +158,8 @@  spi0: spi@b00 {
 			compatible = "ralink,mt7621-spi";
 			reg = <0xb00 0x100>;
 
-			clocks = <&sysclock>;
+			clocks = <&sysc MT7621_CLK_SPI>;
+			clock-names = "spi";
 
 			resets = <&rstctrl 18>;
 			reset-names = "spi";
@@ -189,6 +175,8 @@  gdma: gdma@2800 {
 			compatible = "ralink,rt3883-gdma";
 			reg = <0x2800 0x800>;
 
+			clocks = <&sysc MT7621_CLK_GDMA>;
+			clock-names = "gdma";
 			resets = <&rstctrl 14>;
 			reset-names = "dma";
 
@@ -206,6 +194,8 @@  hsdma: hsdma@7000 {
 			compatible = "mediatek,mt7621-hsdma";
 			reg = <0x7000 0x1000>;
 
+			clocks = <&sysc MT7621_CLK_HSDMA>;
+			clock-names = "hsdma";
 			resets = <&rstctrl 5>;
 			reset-names = "hsdma";
 
@@ -311,11 +301,6 @@  rstctrl: rstctrl {
 		#reset-cells = <1>;
 	};
 
-	clkctrl: clkctrl {
-		compatible = "ralink,rt2880-clock";
-		#clock-cells = <1>;
-	};
-
 	sdhci: sdhci@1E130000 {
 		status = "disabled";
 
@@ -334,7 +319,8 @@  sdhci: sdhci@1E130000 {
 		pinctrl-0 = <&sdhci_pins>;
 		pinctrl-1 = <&sdhci_pins>;
 
-		clocks = <&mmc_clock &mmc_clock>;
+		clocks = <&sysc MT7621_CLK_SHXC>,
+			 <&sysc MT7621_CLK_50M>;
 		clock-names = "source", "hclk";
 
 		interrupt-parent = <&gic>;
@@ -349,7 +335,7 @@  xhci: xhci@1E1C0000 {
 		       0x1e1d0700 0x0100>;
 		reg-names = "mac", "ippc";
 
-		clocks = <&sysclock>;
+		clocks = <&sysc MT7621_CLK_XTAL>;
 		clock-names = "sys_ck";
 
 		interrupt-parent = <&gic>;
@@ -368,7 +354,7 @@  gic: interrupt-controller@1fbc0000 {
 		timer {
 			compatible = "mti,gic-timer";
 			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
-			clocks = <&cpuclock>;
+			clocks = <&sysc MT7621_CLK_CPU>;
 		};
 	};
 
@@ -381,6 +367,9 @@  nand: nand@1e003000 {
 			0x1e003800 0x800>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		clocks = <&sysc MT7621_CLK_NAND>;
+		clock-names = "nand";
 	};
 
 	ethsys: syscon@1e000000 {
@@ -394,8 +383,9 @@  ethernet: ethernet@1e100000 {
 		compatible = "mediatek,mt7621-eth";
 		reg = <0x1e100000 0x10000>;
 
-		clocks = <&sysclock>;
-		clock-names = "ethif";
+		clocks = <&sysc MT7621_CLK_FE>,
+			 <&sysc MT7621_CLK_ETH>;
+		clock-names = "fe", "ethif";
 
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -521,7 +511,9 @@  GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
 
 		resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
 		reset-names = "pcie0", "pcie1", "pcie2";
-		clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
+		clocks = <&sysc MT7621_CLK_PCIE0>,
+			 <&sysc MT7621_CLK_PCIE1>,
+			 <&sysc MT7621_CLK_PCIE2>;
 		clock-names = "pcie0", "pcie1", "pcie2";
 		phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
 		phy-names = "pcie-phy0", "pcie-phy2";