diff mbox series

[v1,2/3] MIPS: ath79: ar9331: Add OpeneEmbed SOM9331 Board

Message ID 20210514051743.15248-2-o.rempel@pengutronix.de (mailing list archive)
State Accepted
Commit cbafa54aa2ae23939846e150ad4ba98c784f6395
Headers show
Series [v1,1/3] dt-bindings: vendor-prefixes: Add an entry for OpenEmbed | expand

Commit Message

Oleksij Rempel May 14, 2021, 5:17 a.m. UTC
Add SOM9331 based Board. It has 3 LAN ports, usb to uart controller and
USB type A port.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/mips/boot/dts/qca/Makefile               |   1 +
 .../qca/ar9331_openembed_som9331_board.dts    | 110 ++++++++++++++++++
 2 files changed, 111 insertions(+)
 create mode 100644 arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts

Comments

Thomas Bogendoerfer May 27, 2021, 11:43 a.m. UTC | #1
On Fri, May 14, 2021 at 07:17:42AM +0200, Oleksij Rempel wrote:
> Add SOM9331 based Board. It has 3 LAN ports, usb to uart controller and
> USB type A port.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  arch/mips/boot/dts/qca/Makefile               |   1 +
>  .../qca/ar9331_openembed_som9331_board.dts    | 110 ++++++++++++++++++
>  2 files changed, 111 insertions(+)
>  create mode 100644 arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts

applied to mips-next.

Thomas.
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index 4451cf45b0ad..6749f77068a8 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -4,4 +4,5 @@  dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_dpt_module.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_dragino_ms14.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_omega.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_openembed_som9331_board.dtb
 dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
diff --git a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
new file mode 100644
index 000000000000..e6622f8e8c2b
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
@@ -0,0 +1,110 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "OpenEmbed SOM9331 Board";
+	compatible = "openembed,som9331";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q64FVSIG SPI flash */
+	spiflash: w25q64@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q64", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&switch_port1 {
+	label = "lan0";
+	status = "okay";
+};
+
+&switch_port3 {
+	label = "lan1";
+	status = "okay";
+};
+
+&phy_port0 {
+	status = "okay";
+};
+
+&phy_port2 {
+	status = "okay";
+};
+
+&phy_port4 {
+	status = "okay";
+};