diff mbox series

MIPS: Malta: Enable BLK_DEV_INITRD

Message ID 20220208191726.1304731-1-nathan@kernel.org (mailing list archive)
State Accepted
Commit b745569e7dcec8f1d6106b77f83576adb956fa08
Headers show
Series MIPS: Malta: Enable BLK_DEV_INITRD | expand

Commit Message

Nathan Chancellor Feb. 8, 2022, 7:17 p.m. UTC
This configuration is useful for boot testing malta_defconfig in QEMU
with just a simple cpio initrd, instead of a full ext4 rootfs.

This results in an increase of ~164KB of vmlinux (with GCC 11.2.0):

$ diskus vmlinux.before
11.19 MB (11,194,368 bytes)

$ diskus vmlinux.after
11.36 MB (11,358,208 bytes)

This size increase comes from the fact that usr/Kconfig is sourced when
CONFIG_BLK_DEV_INITRD is enabled, which defaults to supporting several
decompression algorithms for compressed initrds. This seems like a
reasonable tradeoff but these configurations could be disabled in the
future if there are complaints about the size increase.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
---
 arch/mips/configs/malta_defconfig | 1 +
 1 file changed, 1 insertion(+)


base-commit: dfd42facf1e4ada021b939b4e19c935dcdd55566

Comments

Kees Cook Feb. 9, 2022, 2:53 a.m. UTC | #1
On Tue, Feb 08, 2022 at 12:17:26PM -0700, Nathan Chancellor wrote:
> This configuration is useful for boot testing malta_defconfig in QEMU
> with just a simple cpio initrd, instead of a full ext4 rootfs.
> 
> This results in an increase of ~164KB of vmlinux (with GCC 11.2.0):
> 
> $ diskus vmlinux.before
> 11.19 MB (11,194,368 bytes)
> 
> $ diskus vmlinux.after
> 11.36 MB (11,358,208 bytes)
> 
> This size increase comes from the fact that usr/Kconfig is sourced when
> CONFIG_BLK_DEV_INITRD is enabled, which defaults to supporting several
> decompression algorithms for compressed initrds. This seems like a
> reasonable tradeoff but these configurations could be disabled in the
> future if there are complaints about the size increase.
> 
> Signed-off-by: Nathan Chancellor <nathan@kernel.org>

I'm all for having a regular way to test all defconfigs. So, FWIW:

Reviewed-by: Kees Cook <keescook@chromium.org>

-Kees

> ---
>  arch/mips/configs/malta_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
> index 3321bb576944..3456ac8ded6c 100644
> --- a/arch/mips/configs/malta_defconfig
> +++ b/arch/mips/configs/malta_defconfig
> @@ -4,6 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
>  CONFIG_LOG_BUF_SHIFT=15
>  CONFIG_NAMESPACES=y
>  CONFIG_RELAY=y
> +CONFIG_BLK_DEV_INITRD=y
>  CONFIG_EXPERT=y
>  # CONFIG_COMPAT_BRK is not set
>  CONFIG_SLAB=y
> 
> base-commit: dfd42facf1e4ada021b939b4e19c935dcdd55566
> -- 
> 2.35.1
>
Thomas Bogendoerfer Feb. 9, 2022, 1:34 p.m. UTC | #2
On Tue, Feb 08, 2022 at 12:17:26PM -0700, Nathan Chancellor wrote:
> This configuration is useful for boot testing malta_defconfig in QEMU
> with just a simple cpio initrd, instead of a full ext4 rootfs.
> 
> This results in an increase of ~164KB of vmlinux (with GCC 11.2.0):
> 
> $ diskus vmlinux.before
> 11.19 MB (11,194,368 bytes)
> 
> $ diskus vmlinux.after
> 11.36 MB (11,358,208 bytes)
> 
> This size increase comes from the fact that usr/Kconfig is sourced when
> CONFIG_BLK_DEV_INITRD is enabled, which defaults to supporting several
> decompression algorithms for compressed initrds. This seems like a
> reasonable tradeoff but these configurations could be disabled in the
> future if there are complaints about the size increase.
> 
> Signed-off-by: Nathan Chancellor <nathan@kernel.org>
> ---
>  arch/mips/configs/malta_defconfig | 1 +
>  1 file changed, 1 insertion(+)

applied to mips-next.

Thomas.
diff mbox series

Patch

diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 3321bb576944..3456ac8ded6c 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -4,6 +4,7 @@  CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_NAMESPACES=y
 CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y