@@ -133,9 +133,9 @@ static inline void serial_out(struct uart_8250_port *up, int offset, int value)
*
* Returns LSR value or'ed with the preserved flags (if any).
*/
-static inline unsigned int serial_lsr_in(struct uart_8250_port *up)
+static inline u16 serial_lsr_in(struct uart_8250_port *up)
{
- unsigned int lsr = up->lsr_saved_flags;
+ u16 lsr = up->lsr_saved_flags;
lsr |= serial_in(up, UART_LSR);
up->lsr_saved_flags = lsr & LSR_SAVE_FLAGS;
@@ -195,11 +195,11 @@ static int xr17v35x_startup(struct uart_port *port)
static void exar_shutdown(struct uart_port *port)
{
- unsigned char lsr;
bool tx_complete = false;
struct uart_8250_port *up = up_to_u8250p(port);
struct circ_buf *xmit = &port->state->xmit;
int i = 0;
+ u16 lsr;
do {
lsr = serial_in(up, UART_LSR);
@@ -25,8 +25,8 @@
int fsl8250_handle_irq(struct uart_port *port)
{
- unsigned char lsr, orig_lsr;
unsigned long flags;
+ u16 lsr, orig_lsr;
unsigned int iir;
struct uart_8250_port *up = up_to_u8250p(port);
@@ -54,7 +54,7 @@ static void early_out(struct uart_port *port, int offset, uint8_t value)
static void ingenic_early_console_putc(struct uart_port *port, unsigned char c)
{
- uint8_t lsr;
+ u16 lsr;
do {
lsr = early_in(port, UART_LSR);
@@ -1115,8 +1115,7 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
return omap_8250_rx_dma(up);
}
-static unsigned char omap_8250_handle_rx_dma(struct uart_8250_port *up,
- u8 iir, unsigned char status)
+static u16 omap_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir, u16 status)
{
if ((status & (UART_LSR_DR | UART_LSR_BI)) &&
(iir & UART_IIR_RDI)) {
@@ -1130,7 +1129,7 @@ static unsigned char omap_8250_handle_rx_dma(struct uart_8250_port *up,
}
static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir,
- unsigned char status)
+ u16 status)
{
/*
* Queue a new transfer if FIFO has data.
@@ -1164,7 +1163,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
struct omap8250_priv *priv = up->port.private_data;
- unsigned char status;
+ u16 status;
u8 iir;
serial8250_rpm_get(up);
@@ -1508,7 +1508,7 @@ static inline void __stop_tx(struct uart_8250_port *p)
struct uart_8250_em485 *em485 = p->em485;
if (em485) {
- unsigned char lsr = serial_lsr_in(p);
+ u16 lsr = serial_lsr_in(p);
u64 stop_delay = 0;
if (!(lsr & UART_LSR_THRE))
@@ -1565,7 +1565,7 @@ static inline void __start_tx(struct uart_port *port)
if (serial8250_set_THRI(up)) {
if (up->bugs & UART_BUG_TXEN) {
- unsigned char lsr = serial_lsr_in(up);
+ u16 lsr = serial_lsr_in(up);
if (lsr & UART_LSR_THRE)
serial8250_tx_chars(up);
@@ -1719,7 +1719,7 @@ static void serial8250_enable_ms(struct uart_port *port)
serial8250_rpm_put(up);
}
-void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
+void serial8250_read_char(struct uart_8250_port *up, u16 lsr)
{
struct uart_port *port = &up->port;
unsigned char ch;
@@ -1788,7 +1788,7 @@ EXPORT_SYMBOL_GPL(serial8250_read_char);
* (such as THRE) because the LSR value might come from an already consumed
* character.
*/
-unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
+u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr)
{
struct uart_port *port = &up->port;
int max_count = 256;
@@ -1908,10 +1908,10 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
*/
int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
{
- unsigned char status;
struct uart_8250_port *up = up_to_u8250p(port);
bool skip_rx = false;
unsigned long flags;
+ u16 status;
if (iir & UART_IIR_NO_INT)
return 0;
@@ -1994,7 +1994,7 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
unsigned long flags;
- unsigned int lsr;
+ u16 lsr;
serial8250_rpm_get(up);
@@ -2117,8 +2117,8 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
static int serial8250_get_poll_char(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
- unsigned char lsr;
int status;
+ u16 lsr;
serial8250_rpm_get(up);
@@ -2173,8 +2173,9 @@ int serial8250_do_startup(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
unsigned long flags;
- unsigned char lsr, iir;
+ unsigned char iir;
int retval;
+ u16 lsr;
if (!port->fifosize)
port->fifosize = uart_config[port->type].fifo_size;
@@ -119,7 +119,7 @@ struct uart_8250_port {
* be immediately processed.
*/
#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
- unsigned char lsr_saved_flags;
+ u16 lsr_saved_flags;
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
@@ -170,8 +170,8 @@ extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
unsigned int quot_frac);
extern int fsl8250_handle_irq(struct uart_port *port);
int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
-unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
-void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr);
+u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr);
+void serial8250_read_char(struct uart_8250_port *up, u16 lsr);
void serial8250_tx_chars(struct uart_8250_port *up);
unsigned int serial8250_modem_status(struct uart_8250_port *up);
void serial8250_init_port(struct uart_8250_port *up);
DW flags address received as BIT(8) in LSR. In order to not lose that on read, enlarge lsr_saved_flags to u16. Adjust lsr/status variables and related call chains to use u16. Technically, some of these type conversion would not be needed but it doesn't hurt to be consistent. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- drivers/tty/serial/8250/8250.h | 4 ++-- drivers/tty/serial/8250/8250_exar.c | 2 +- drivers/tty/serial/8250/8250_fsl.c | 2 +- drivers/tty/serial/8250/8250_ingenic.c | 2 +- drivers/tty/serial/8250/8250_omap.c | 7 +++---- drivers/tty/serial/8250/8250_port.c | 17 +++++++++-------- include/linux/serial_8250.h | 6 +++--- 7 files changed, 20 insertions(+), 20 deletions(-)