diff mbox series

[v4,net-next,02/10] dt-bindings: net: dsa: mediatek,mt7530: change mt7530 switch address

Message ID 20220920172556.16557-3-arinc.unal@arinc9.com (mailing list archive)
State Handled Elsewhere
Headers show
Series dt-bindings and mt7621 devicetree changes | expand

Commit Message

Arınç ÜNAL Sept. 20, 2022, 5:25 p.m. UTC 
In the case of muxing phy0 of the MT7530 switch, the switch and the phy
will have the same address on the mdio bus, 0. This causes the ethernet
driver to fail since devices on the mdio bus cannot share an address.

Any address can be used for the switch, therefore, change the switch
address to 0x1f.

Suggested-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/net/dsa/mediatek,mt7530.yaml     | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index bc6446e1f55a..138ee6bff267 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -285,9 +285,9 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        switch@0 {
+        switch@1f {
             compatible = "mediatek,mt7530";
-            reg = <0>;
+            reg = <0x1f>;
 
             reset-gpios = <&pio 33 0>;
 
@@ -346,9 +346,9 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        switch@0 {
+        switch@1f {
             compatible = "mediatek,mt7530";
-            reg = <0>;
+            reg = <0x1f>;
 
             mediatek,mcm;
             resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
@@ -474,9 +474,9 @@  examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        switch@0 {
+        switch@1f {
             compatible = "mediatek,mt7621";
-            reg = <0>;
+            reg = <0x1f>;
 
             mediatek,mcm;
             resets = <&sysc MT7621_RST_MCM>;
@@ -560,9 +560,9 @@  examples:
                 reg = <4>;
             };
 
-            switch@0 {
+            switch@1f {
                 compatible = "mediatek,mt7621";
-                reg = <0>;
+                reg = <0x1f>;
 
                 mediatek,mcm;
                 resets = <&sysc MT7621_RST_MCM>;
@@ -650,9 +650,9 @@  examples:
                 phy-mode = "rgmii";
             };
 
-            switch@0 {
+            switch@1f {
                 compatible = "mediatek,mt7621";
-                reg = <0>;
+                reg = <0x1f>;
 
                 mediatek,mcm;
                 resets = <&sysc MT7621_RST_MCM>;
@@ -730,9 +730,9 @@  examples:
                 phy-mode = "rgmii";
             };
 
-            switch@0 {
+            switch@1f {
                 compatible = "mediatek,mt7621";
-                reg = <0>;
+                reg = <0x1f>;
 
                 mediatek,mcm;
                 resets = <&sysc MT7621_RST_MCM>;