| Message ID | 20221026194345.243007-2-aidanmacdonald.0x0@gmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | Add support for X1000 audio clocks | expand |
Hi Aidan, Le mer. 26 oct. 2022 à 20:43:40 +0100, Aidan MacDonald <aidanmacdonald.0x0@gmail.com> a écrit : > Add support for defining PLL clocks with od_bits = 0, meaning that > OD is fixed to 1 and there is no OD field in the register. In this > case od_max must also be 0, which is enforced with BUG_ON(). > > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > --- > v1 -> v2: Simplify od lookup in ingenic_pll_recalc_rate() and > enforce od_max == 0 when od_bits is zero. > > drivers/clk/ingenic/cgu.c | 21 +++++++++++++++------ > drivers/clk/ingenic/cgu.h | 3 ++- > 2 files changed, 17 insertions(+), 7 deletions(-) > > diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c > index 861c50d6cb24..3481129114b1 100644 > --- a/drivers/clk/ingenic/cgu.c > +++ b/drivers/clk/ingenic/cgu.c > @@ -83,7 +83,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned > long parent_rate) > const struct ingenic_cgu_clk_info *clk_info = > to_clk_info(ingenic_clk); > struct ingenic_cgu *cgu = ingenic_clk->cgu; > const struct ingenic_cgu_pll_info *pll_info; > - unsigned m, n, od_enc, od; > + unsigned m, n, od, od_enc = 0; > bool bypass; > u32 ctl; > > @@ -96,8 +96,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, > unsigned long parent_rate) > m += pll_info->m_offset; > n = (ctl >> pll_info->n_shift) & GENMASK(pll_info->n_bits - 1, 0); > n += pll_info->n_offset; > - od_enc = ctl >> pll_info->od_shift; > - od_enc &= GENMASK(pll_info->od_bits - 1, 0); > + > + if (pll_info->od_bits > 0) { > + od_enc = ctl >> pll_info->od_shift; > + od_enc &= GENMASK(pll_info->od_bits - 1, 0); > + } > > if (pll_info->bypass_bit >= 0) { > ctl = readl(cgu->base + pll_info->bypass_reg); > @@ -112,7 +115,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, > unsigned long parent_rate) > if (pll_info->od_encoding[od] == od_enc) > break; > } I'd add a space there. With that: Reviewed-by: Paul Cercueil <paul@crapouillou.net> > - BUG_ON(od == pll_info->od_max); > + /* if od_max = 0, od_bits should be 0 and od is fixed to 1. */ > + if (pll_info->od_max == 0) > + BUG_ON(pll_info->od_bits != 0); I don't think this first BUG_ON() is needed, if we do a good job reviewing patches. But I don't care enough to ask you to remove it. Cheers, -Paul > + else > + BUG_ON(od == pll_info->od_max); > od++; > > return div_u64((u64)parent_rate * m * pll_info->rate_multiplier, > @@ -215,8 +222,10 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned > long req_rate, > ctl &= ~(GENMASK(pll_info->n_bits - 1, 0) << pll_info->n_shift); > ctl |= (n - pll_info->n_offset) << pll_info->n_shift; > > - ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift); > - ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift; > + if (pll_info->od_bits > 0) { > + ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift); > + ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift; > + } > > writel(ctl, cgu->base + pll_info->reg); > > diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h > index 147b7df0d657..567142b584bb 100644 > --- a/drivers/clk/ingenic/cgu.h > +++ b/drivers/clk/ingenic/cgu.h > @@ -33,7 +33,8 @@ > * @od_shift: the number of bits to shift the post-VCO divider value > by (ie. > * the index of the lowest bit of the post-VCO divider > value in > * the PLL's control register) > - * @od_bits: the size of the post-VCO divider field in bits > + * @od_bits: the size of the post-VCO divider field in bits, or 0 if > no > + * OD field exists (then the OD is fixed to 1) > * @od_max: the maximum post-VCO divider value > * @od_encoding: a pointer to an array mapping post-VCO divider > values to > * their encoded values in the PLL control register, > or -1 for > -- > 2.38.1 >
Quoting Aidan MacDonald (2022-10-26 12:43:40) > Add support for defining PLL clocks with od_bits = 0, meaning that > OD is fixed to 1 and there is no OD field in the register. In this > case od_max must also be 0, which is enforced with BUG_ON(). > > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > --- Applied to clk-next
Paul Cercueil <paul@crapouillou.net> writes: > Hi Aidan, > > Le mer. 26 oct. 2022 à 20:43:40 +0100, Aidan MacDonald > <aidanmacdonald.0x0@gmail.com> a écrit : >> Add support for defining PLL clocks with od_bits = 0, meaning that >> OD is fixed to 1 and there is no OD field in the register. In this >> case od_max must also be 0, which is enforced with BUG_ON(). >> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> >> --- >> v1 -> v2: Simplify od lookup in ingenic_pll_recalc_rate() and >> enforce od_max == 0 when od_bits is zero. >> drivers/clk/ingenic/cgu.c | 21 +++++++++++++++------ >> drivers/clk/ingenic/cgu.h | 3 ++- >> 2 files changed, 17 insertions(+), 7 deletions(-) >> diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c >> index 861c50d6cb24..3481129114b1 100644 >> --- a/drivers/clk/ingenic/cgu.c >> +++ b/drivers/clk/ingenic/cgu.c >> @@ -83,7 +83,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long >> parent_rate) >> const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk); >> struct ingenic_cgu *cgu = ingenic_clk->cgu; >> const struct ingenic_cgu_pll_info *pll_info; >> - unsigned m, n, od_enc, od; >> + unsigned m, n, od, od_enc = 0; >> bool bypass; >> u32 ctl; >> @@ -96,8 +96,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long >> parent_rate) >> m += pll_info->m_offset; >> n = (ctl >> pll_info->n_shift) & GENMASK(pll_info->n_bits - 1, 0); >> n += pll_info->n_offset; >> - od_enc = ctl >> pll_info->od_shift; >> - od_enc &= GENMASK(pll_info->od_bits - 1, 0); >> + >> + if (pll_info->od_bits > 0) { >> + od_enc = ctl >> pll_info->od_shift; >> + od_enc &= GENMASK(pll_info->od_bits - 1, 0); >> + } >> if (pll_info->bypass_bit >= 0) { >> ctl = readl(cgu->base + pll_info->bypass_reg); >> @@ -112,7 +115,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long >> parent_rate) >> if (pll_info->od_encoding[od] == od_enc) >> break; >> } > > I'd add a space there. > > With that: > Reviewed-by: Paul Cercueil <paul@crapouillou.net> > Already done; the space is there in my outbox and on lore.kernel.org. I think you might've accidentally removed it. Stephen's already applied the series anyway, so... >> - BUG_ON(od == pll_info->od_max); >> + /* if od_max = 0, od_bits should be 0 and od is fixed to 1. */ >> + if (pll_info->od_max == 0) >> + BUG_ON(pll_info->od_bits != 0); > > I don't think this first BUG_ON() is needed, if we do a good job reviewing > patches. But I don't care enough to ask you to remove it. > > Cheers, > -Paul > >> + else >> + BUG_ON(od == pll_info->od_max); >> od++; >> return div_u64((u64)parent_rate * m * pll_info->rate_multiplier, >> @@ -215,8 +222,10 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long >> req_rate, >> ctl &= ~(GENMASK(pll_info->n_bits - 1, 0) << pll_info->n_shift); >> ctl |= (n - pll_info->n_offset) << pll_info->n_shift; >> - ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift); >> - ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift; >> + if (pll_info->od_bits > 0) { >> + ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift); >> + ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift; >> + } >> writel(ctl, cgu->base + pll_info->reg); >> diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h >> index 147b7df0d657..567142b584bb 100644 >> --- a/drivers/clk/ingenic/cgu.h >> +++ b/drivers/clk/ingenic/cgu.h >> @@ -33,7 +33,8 @@ >> * @od_shift: the number of bits to shift the post-VCO divider value by (ie. >> * the index of the lowest bit of the post-VCO divider value in >> * the PLL's control register) >> - * @od_bits: the size of the post-VCO divider field in bits >> + * @od_bits: the size of the post-VCO divider field in bits, or 0 if no >> + * OD field exists (then the OD is fixed to 1) >> * @od_max: the maximum post-VCO divider value >> * @od_encoding: a pointer to an array mapping post-VCO divider values to >> * their encoded values in the PLL control register, or -1 for >> -- >> 2.38.1 >>
Quoting Aidan MacDonald (2022-10-27 14:40:02) > > Paul Cercueil <paul@crapouillou.net> writes: > > > Hi Aidan, > > > > Le mer. 26 oct. 2022 à 20:43:40 +0100, Aidan MacDonald > > <aidanmacdonald.0x0@gmail.com> a écrit : > >> Add support for defining PLL clocks with od_bits = 0, meaning that > >> OD is fixed to 1 and there is no OD field in the register. In this > >> case od_max must also be 0, which is enforced with BUG_ON(). > >> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > >> --- > >> v1 -> v2: Simplify od lookup in ingenic_pll_recalc_rate() and > >> enforce od_max == 0 when od_bits is zero. > >> drivers/clk/ingenic/cgu.c | 21 +++++++++++++++------ > >> drivers/clk/ingenic/cgu.h | 3 ++- > >> 2 files changed, 17 insertions(+), 7 deletions(-) > >> diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c > >> index 861c50d6cb24..3481129114b1 100644 > >> --- a/drivers/clk/ingenic/cgu.c > >> +++ b/drivers/clk/ingenic/cgu.c > >> @@ -83,7 +83,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long > >> parent_rate) > >> const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk); > >> struct ingenic_cgu *cgu = ingenic_clk->cgu; > >> const struct ingenic_cgu_pll_info *pll_info; > >> - unsigned m, n, od_enc, od; > >> + unsigned m, n, od, od_enc = 0; > >> bool bypass; > >> u32 ctl; > >> @@ -96,8 +96,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long > >> parent_rate) > >> m += pll_info->m_offset; > >> n = (ctl >> pll_info->n_shift) & GENMASK(pll_info->n_bits - 1, 0); > >> n += pll_info->n_offset; > >> - od_enc = ctl >> pll_info->od_shift; > >> - od_enc &= GENMASK(pll_info->od_bits - 1, 0); > >> + > >> + if (pll_info->od_bits > 0) { > >> + od_enc = ctl >> pll_info->od_shift; > >> + od_enc &= GENMASK(pll_info->od_bits - 1, 0); > >> + } > >> if (pll_info->bypass_bit >= 0) { > >> ctl = readl(cgu->base + pll_info->bypass_reg); > >> @@ -112,7 +115,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long > >> parent_rate) > >> if (pll_info->od_encoding[od] == od_enc) > >> break; > >> } > > > > I'd add a space there. > > > > With that: > > Reviewed-by: Paul Cercueil <paul@crapouillou.net> > > > > Already done; the space is there in my outbox and on lore.kernel.org. > I think you might've accidentally removed it. Stephen's already > applied the series anyway, so... > I fixed the whitespace.
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c index 861c50d6cb24..3481129114b1 100644 --- a/drivers/clk/ingenic/cgu.c +++ b/drivers/clk/ingenic/cgu.c @@ -83,7 +83,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk); struct ingenic_cgu *cgu = ingenic_clk->cgu; const struct ingenic_cgu_pll_info *pll_info; - unsigned m, n, od_enc, od; + unsigned m, n, od, od_enc = 0; bool bypass; u32 ctl; @@ -96,8 +96,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) m += pll_info->m_offset; n = (ctl >> pll_info->n_shift) & GENMASK(pll_info->n_bits - 1, 0); n += pll_info->n_offset; - od_enc = ctl >> pll_info->od_shift; - od_enc &= GENMASK(pll_info->od_bits - 1, 0); + + if (pll_info->od_bits > 0) { + od_enc = ctl >> pll_info->od_shift; + od_enc &= GENMASK(pll_info->od_bits - 1, 0); + } if (pll_info->bypass_bit >= 0) { ctl = readl(cgu->base + pll_info->bypass_reg); @@ -112,7 +115,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) if (pll_info->od_encoding[od] == od_enc) break; } - BUG_ON(od == pll_info->od_max); + /* if od_max = 0, od_bits should be 0 and od is fixed to 1. */ + if (pll_info->od_max == 0) + BUG_ON(pll_info->od_bits != 0); + else + BUG_ON(od == pll_info->od_max); od++; return div_u64((u64)parent_rate * m * pll_info->rate_multiplier, @@ -215,8 +222,10 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate, ctl &= ~(GENMASK(pll_info->n_bits - 1, 0) << pll_info->n_shift); ctl |= (n - pll_info->n_offset) << pll_info->n_shift; - ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift); - ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift; + if (pll_info->od_bits > 0) { + ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift); + ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift; + } writel(ctl, cgu->base + pll_info->reg); diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h index 147b7df0d657..567142b584bb 100644 --- a/drivers/clk/ingenic/cgu.h +++ b/drivers/clk/ingenic/cgu.h @@ -33,7 +33,8 @@ * @od_shift: the number of bits to shift the post-VCO divider value by (ie. * the index of the lowest bit of the post-VCO divider value in * the PLL's control register) - * @od_bits: the size of the post-VCO divider field in bits + * @od_bits: the size of the post-VCO divider field in bits, or 0 if no + * OD field exists (then the OD is fixed to 1) * @od_max: the maximum post-VCO divider value * @od_encoding: a pointer to an array mapping post-VCO divider values to * their encoded values in the PLL control register, or -1 for
Add support for defining PLL clocks with od_bits = 0, meaning that OD is fixed to 1 and there is no OD field in the register. In this case od_max must also be 0, which is enforced with BUG_ON(). Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> --- v1 -> v2: Simplify od lookup in ingenic_pll_recalc_rate() and enforce od_max == 0 when od_bits is zero. drivers/clk/ingenic/cgu.c | 21 +++++++++++++++------ drivers/clk/ingenic/cgu.h | 3 ++- 2 files changed, 17 insertions(+), 7 deletions(-)