| Message ID | 20230604145642.200577-4-paul@crapouillou.net (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | fbf1e42093f8d6346baf17079585fbcebb2ff284 |
| Headers | show |
| Series | MIPS: CI20: Add WiFi / Bluetooth support | expand |
> Am 04.06.2023 um 16:56 schrieb Paul Cercueil <paul@crapouillou.net>: > > Provide parent regulators to the ACT8600 regulators that need one. > > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > arch/mips/boot/dts/ingenic/ci20.dts | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts > index 5361606c5e13..662796acda41 100644 > --- a/arch/mips/boot/dts/ingenic/ci20.dts > +++ b/arch/mips/boot/dts/ingenic/ci20.dts > @@ -242,16 +242,19 @@ regulators { > vddcore: DCDC1 { > regulator-min-microvolt = <1100000>; > regulator-max-microvolt = <1100000>; > + vp1-supply = <&vcc_33v>; where is vcc_33v defined? Unless [7/9] "MIPS: DTS: CI20: Enable support for WiFi / Bluetooth" is applied? This way the patches in between can't be bisected. > regulator-always-on; > }; > vddmem: DCDC2 { > regulator-min-microvolt = <1500000>; > regulator-max-microvolt = <1500000>; > + vp2-supply = <&vcc_33v>; > regulator-always-on; > }; > vcc_33: DCDC3 { > regulator-min-microvolt = <3300000>; > regulator-max-microvolt = <3300000>; > + vp3-supply = <&vcc_33v>; > regulator-always-on; > }; > vcc_50: SUDCDC_REG4 { > @@ -262,21 +265,25 @@ vcc_50: SUDCDC_REG4 { > vcc_25: LDO5 { > regulator-min-microvolt = <2500000>; > regulator-max-microvolt = <2500000>; > + inl-supply = <&vcc_33v>; > regulator-always-on; > }; > wifi_io: LDO6 { > regulator-min-microvolt = <2500000>; > regulator-max-microvolt = <2500000>; > + inl-supply = <&vcc_33v>; > regulator-always-on; > }; > cim_io_28: LDO7 { > regulator-min-microvolt = <2800000>; > regulator-max-microvolt = <2800000>; > + inl-supply = <&vcc_33v>; > regulator-always-on; > }; > cim_io_15: LDO8 { > regulator-min-microvolt = <1500000>; > regulator-max-microvolt = <1500000>; > + inl-supply = <&vcc_33v>; > regulator-always-on; > }; > vrtc_18: LDO_REG9 { > -- > 2.39.2 >
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 5361606c5e13..662796acda41 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -242,16 +242,19 @@ regulators { vddcore: DCDC1 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; + vp1-supply = <&vcc_33v>; regulator-always-on; }; vddmem: DCDC2 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; + vp2-supply = <&vcc_33v>; regulator-always-on; }; vcc_33: DCDC3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vp3-supply = <&vcc_33v>; regulator-always-on; }; vcc_50: SUDCDC_REG4 { @@ -262,21 +265,25 @@ vcc_50: SUDCDC_REG4 { vcc_25: LDO5 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; + inl-supply = <&vcc_33v>; regulator-always-on; }; wifi_io: LDO6 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; + inl-supply = <&vcc_33v>; regulator-always-on; }; cim_io_28: LDO7 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + inl-supply = <&vcc_33v>; regulator-always-on; }; cim_io_15: LDO8 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; + inl-supply = <&vcc_33v>; regulator-always-on; }; vrtc_18: LDO_REG9 {
Provide parent regulators to the ACT8600 regulators that need one. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- arch/mips/boot/dts/ingenic/ci20.dts | 7 +++++++ 1 file changed, 7 insertions(+)