@@ -45,7 +45,6 @@
#define LS1X_NAND_BASE 0x1fe78000
#define LS1X_CLK_BASE 0x1fe78030
-#include <regs-clk.h>
#include <regs-mux.h>
#include <regs-rtc.h>
deleted file mode 100644
@@ -1,81 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 Clock Register Definitions.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_REGS_CLK_H
-#define __ASM_MACH_LOONGSON32_REGS_CLK_H
-
-#define LS1X_CLK_REG(x) \
- ((void __iomem *)KSEG1ADDR(LS1X_CLK_BASE + (x)))
-
-#define LS1X_CLK_PLL_FREQ LS1X_CLK_REG(0x0)
-#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-/* Clock PLL Divisor Register Bits */
-#define DIV_DC_EN BIT(31)
-#define DIV_DC_RST BIT(30)
-#define DIV_CPU_EN BIT(25)
-#define DIV_CPU_RST BIT(24)
-#define DIV_DDR_EN BIT(19)
-#define DIV_DDR_RST BIT(18)
-#define RST_DC_EN BIT(5)
-#define RST_DC BIT(4)
-#define RST_DDR_EN BIT(3)
-#define RST_DDR BIT(2)
-#define RST_CPU_EN BIT(1)
-#define RST_CPU BIT(0)
-
-#define DIV_DC_SHIFT 26
-#define DIV_CPU_SHIFT 20
-#define DIV_DDR_SHIFT 14
-
-#define DIV_DC_WIDTH 4
-#define DIV_CPU_WIDTH 4
-#define DIV_DDR_WIDTH 4
-
-#define BYPASS_DC_SHIFT 12
-#define BYPASS_DDR_SHIFT 10
-#define BYPASS_CPU_SHIFT 8
-
-#define BYPASS_DC_WIDTH 1
-#define BYPASS_DDR_WIDTH 1
-#define BYPASS_CPU_WIDTH 1
-
-#elif defined(CONFIG_LOONGSON1_LS1C)
-/* PLL/SDRAM Frequency configuration register Bits */
-#define PLL_VALID BIT(31)
-#define FRAC_N GENMASK(23, 16)
-#define RST_TIME GENMASK(3, 2)
-#define SDRAM_DIV GENMASK(1, 0)
-
-/* CPU/CAMERA/DC Frequency configuration register Bits */
-#define DIV_DC_EN BIT(31)
-#define DIV_DC GENMASK(30, 24)
-#define DIV_CAM_EN BIT(23)
-#define DIV_CAM GENMASK(22, 16)
-#define DIV_CPU_EN BIT(15)
-#define DIV_CPU GENMASK(14, 8)
-#define DIV_DC_SEL_EN BIT(5)
-#define DIV_DC_SEL BIT(4)
-#define DIV_CAM_SEL_EN BIT(3)
-#define DIV_CAM_SEL BIT(2)
-#define DIV_CPU_SEL_EN BIT(1)
-#define DIV_CPU_SEL BIT(0)
-
-#define DIV_DC_SHIFT 24
-#define DIV_CAM_SHIFT 16
-#define DIV_CPU_SHIFT 8
-#define DIV_DDR_SHIFT 0
-
-#define DIV_DC_WIDTH 7
-#define DIV_CAM_WIDTH 7
-#define DIV_CPU_WIDTH 7
-#define DIV_DDR_WIDTH 2
-
-#endif
-
-#endif /* __ASM_MACH_LOONGSON32_REGS_CLK_H */
Since commit c46496119ed0 ("clk: loongson1: Remove the outdated driver"), no one is using regs-clk.h. Therefore, remove this obsolete header file. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> --- V1 -> V2: None .../include/asm/mach-loongson32/loongson1.h | 1 - .../include/asm/mach-loongson32/regs-clk.h | 81 ------------------- 2 files changed, 82 deletions(-) delete mode 100644 arch/mips/include/asm/mach-loongson32/regs-clk.h