@@ -466,6 +466,21 @@ config LANTIQ
config MACH_LOONGSON32
bool "Loongson 32-bit family of machines"
+ select USE_OF
+ select BUILTIN_DTB
+ select BOOT_ELF32
+ select CEVT_R4K
+ select CSRC_R4K
+ select COMMON_CLK
+ select DMA_NONCOHERENT
+ select IRQ_MIPS_CPU
+ select LS1X_IRQ
+ select SYS_HAS_CPU_LOONGSON32
+ select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_ZBOOT
help
This enables support for the Loongson-1 family of machines.
@@ -1350,25 +1365,20 @@ config CPU_LOONGSON2F
have a similar programming interface with FPGA northbridge used in
Loongson2E.
-config CPU_LOONGSON1B
- bool "Loongson 1B"
- depends on SYS_HAS_CPU_LOONGSON1B
- select CPU_LOONGSON32
- select LEDS_GPIO_REGISTER
- help
- The Loongson 1B is a 32-bit SoC, which implements the MIPS32
- Release 1 instruction set and part of the MIPS32 Release 2
- instruction set.
-
-config CPU_LOONGSON1C
- bool "Loongson 1C"
- depends on SYS_HAS_CPU_LOONGSON1C
- select CPU_LOONGSON32
+config CPU_LOONGSON32
+ bool "Loongson 32-bit CPU"
+ depends on SYS_HAS_CPU_LOONGSON32
+ select CPU_MIPS32
+ select CPU_MIPSR2
+ select CPU_HAS_PREFETCH
+ select CPU_HAS_LOAD_STORE_LR
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_CPUFREQ
select LEDS_GPIO_REGISTER
help
- The Loongson 1C is a 32-bit SoC, which implements the MIPS32
- Release 1 instruction set and part of the MIPS32 Release 2
- instruction set.
+ The Loongson GS232 microarchitecture implements the MIPS32 Release 1
+ instruction set and part of the MIPS32 Release 2 instruction set.
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
@@ -1764,15 +1774,6 @@ config CPU_LOONGSON2EF
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
-config CPU_LOONGSON32
- bool
- select CPU_MIPS32
- select CPU_MIPSR2
- select CPU_HAS_PREFETCH
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_HIGHMEM
- select CPU_SUPPORTS_CPUFREQ
-
config CPU_BMIPS32_3300
select SMP_UP if SMP
bool
@@ -1810,10 +1811,7 @@ config SYS_HAS_CPU_LOONGSON2F
select CPU_SUPPORTS_CPUFREQ
select CPU_SUPPORTS_ADDRWINCFG if 64BIT
-config SYS_HAS_CPU_LOONGSON1B
- bool
-
-config SYS_HAS_CPU_LOONGSON1C
+config SYS_HAS_CPU_LOONGSON32
bool
config SYS_HAS_CPU_MIPS32_R1
@@ -2996,8 +2994,8 @@ endchoice
choice
prompt "Kernel command line type" if !CMDLINE_OVERRIDE
default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
- !MACH_LOONGSON64 && !MIPS_MALTA && \
- !CAVIUM_OCTEON_SOC
+ !MACH_LOONGSON64 && !MACH_LOONGSON32 && \
+ !MIPS_MALTA && !CAVIUM_OCTEON_SOC
default MIPS_CMDLINE_FROM_BOOTLOADER
config MIPS_CMDLINE_FROM_DTB
@@ -6,7 +6,7 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_8core_rs780e.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb
dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
-dtb-$(CONFIG_LOONGSON1B_LSGZ_DEV) += lsgz_1b_dev.dtb
-dtb-$(CONFIG_LOONGSON1C_SMARTLOONG) += smartloong_1c.dtb
+dtb-$(CONFIG_MACH_LSGZ_1B_DEV) += lsgz_1b_dev.dtb
+dtb-$(CONFIG_MACH_SMARTLOONG_1C) += smartloong_1c.dtb
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
@@ -24,8 +24,7 @@ static inline int __pure __get_cpu_type(const int cpu_type)
case CPU_LOONGSON64:
#endif
-#if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
- defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
+#ifdef CONFIG_SYS_HAS_CPU_LOONGSON32
case CPU_LOONGSON32:
#endif
@@ -1,38 +1,25 @@
# SPDX-License-Identifier: GPL-2.0
-if MACH_LOONGSON32
choice
prompt "Machine Type"
+ depends on MACH_LOONGSON32
-config LOONGSON1_LS1B
- bool "Loongson LS1B board"
- select CEVT_R4K if !MIPS_EXTERNAL_TIMER
- select CSRC_R4K if !MIPS_EXTERNAL_TIMER
- select SYS_HAS_CPU_LOONGSON1B
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select IRQ_MIPS_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select USE_GENERIC_EARLY_PRINTK_8250
- select COMMON_CLK
+config MACH_LSGZ_1B_DEV
+ bool "LSGZ 1B DEV board"
+ select LOONGSON1_LS1B
+ help
+ Enable this to include the FDT for the LSGZ 1B DEV board.
+
+config MACH_SMARTLOONG_1C
+ bool "Smartloong 1C board"
+ select LOONGSON1_LS1C
+ help
+ Enable this to include the FDT for the Smartloong 1C board.
-config LOONGSON1_LS1C
- bool "Loongson LS1C board"
- select CEVT_R4K if !MIPS_EXTERNAL_TIMER
- select CSRC_R4K if !MIPS_EXTERNAL_TIMER
- select SYS_HAS_CPU_LOONGSON1C
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select IRQ_MIPS_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select USE_GENERIC_EARLY_PRINTK_8250
- select COMMON_CLK
endchoice
-endif # MACH_LOONGSON32
+config LOONGSON1_LS1B
+ bool
+
+config LOONGSON1_LS1C
+ bool
CPU_LOONGSON1B and CPU_LOONGSON1C have the same GS232 core, so merge them into CPU_LOONGSON32. The Kconfig options selected by LOONGSON1_LS1B and LOONGSON1_LS1C is selected by MACH_LOONGSON32 now. And LOONGSON1_LS1B and LOONGSON1_LS1C will be deleted after all platform devices are converted to devicetree nodes. Introduce MACH_LSGZ_1B_DEV and MACH_SMARTLOONG_1C for the built-in DTS selection. Partialy based on the patch by Jiaxun Yang. Link: https://lore.kernel.org/all/20190411121915.8040-4-jiaxun.yang@flygoat.com/ Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> --- arch/mips/Kconfig | 62 ++++++++++++++-------------- arch/mips/boot/dts/loongson/Makefile | 4 +- arch/mips/include/asm/cpu-type.h | 3 +- arch/mips/loongson32/Kconfig | 47 ++++++++------------- 4 files changed, 50 insertions(+), 66 deletions(-)