[2/2] MIPS: Remove unused shadow GPR support from vector irq setup

Commit Message

Thomas Bogendoerfer Dec. 21, 2023, 12:54 p.m. UTC

Using shadow GPRs for vectored interrupts has never been used,
time to remove it.

Signed-off-by: Thomas Bogendoerfer <[e-mail]>
---
 arch/mips/kernel/traps.c | 94 +++++++++++++---------------------------
 1 file changed, 30 insertions(+), 64 deletions(-)

Comments

Thomas Bogendoerfer Dec. 30, 2023, 2:45 p.m. UTC | #1

On Thu, Dec 21, 2023 at 01:54:04PM +0100, Thomas Bogendoerfer wrote:
> Using shadow GPRs for vectored interrupts has never been used,
> time to remove it.
> 
> Signed-off-by: Thomas Bogendoerfer <[e-mail]>
> ---
>  arch/mips/kernel/traps.c | 94 +++++++++++++---------------------------
>  1 file changed, 30 insertions(+), 64 deletions(-)

applied to mips-next.

Thomas.

Patch

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index d90b18908692..c1b2b18b0505 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2055,105 +2055,71 @@  static void do_default_vi(void)
 	panic("Caught unexpected vectored interrupt.");
 }
 
-static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
+void *set_vi_handler(int n, vi_handler_t addr)
 {
+	extern const u8 except_vec_vi[];
+	extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
+	extern const u8 rollback_except_vec_vi[];
 	unsigned long handler;
 	unsigned long old_handler = vi_handlers[n];
 	int srssets = current_cpu_data.srsets;
 	u16 *h;
 	unsigned char *b;
+	const u8 *vec_start;
+	int ori_offset;
+	int handler_len;
 
 	BUG_ON(!cpu_has_veic && !cpu_has_vint);
 
 	if (addr == NULL) {
 		handler = (unsigned long) do_default_vi;
-		srs = 0;
 	} else
 		handler = (unsigned long) addr;
 	vi_handlers[n] = handler;
 
 	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
 
-	if (srs >= srssets)
-		panic("Shadow register set %d not supported", srs);
-
 	if (cpu_has_veic) {
 		if (board_bind_eic_interrupt)
-			board_bind_eic_interrupt(n, srs);
+			board_bind_eic_interrupt(n, 0);
 	} else if (cpu_has_vint) {
 		/* SRSMap is only defined if shadow sets are implemented */
 		if (srssets > 1)
-			change_c0_srsmap(0xf << n*4, srs << n*4);
+			change_c0_srsmap(0xf << n*4, 0 << n*4);
 	}
 
-	if (srs == 0) {
-		/*
-		 * If no shadow set is selected then use the default handler
-		 * that does normal register saving and standard interrupt exit
-		 */
-		extern const u8 except_vec_vi[];
-		extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
-		extern const u8 rollback_except_vec_vi[];
-		const u8 *vec_start = using_rollback_handler() ?
-				      rollback_except_vec_vi : except_vec_vi;
+	vec_start = using_rollback_handler() ? rollback_except_vec_vi :
+					       except_vec_vi;
 #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
-		const int ori_offset = except_vec_vi_ori - vec_start + 2;
+	ori_offset = except_vec_vi_ori - vec_start + 2;
 #else
-		const int ori_offset = except_vec_vi_ori - vec_start;
+	ori_offset = except_vec_vi_ori - vec_start;
 #endif
-		const int handler_len = except_vec_vi_end - vec_start;
+	handler_len = except_vec_vi_end - vec_start;
 
-		if (handler_len > VECTORSPACING) {
-			/*
-			 * Sigh... panicing won't help as the console
-			 * is probably not configured :(
-			 */
-			panic("VECTORSPACING too small");
-		}
-
-		set_handler(((unsigned long)b - ebase), vec_start,
-#ifdef CONFIG_CPU_MICROMIPS
-				(handler_len - 1));
-#else
-				handler_len);
-#endif
-		/* insert offset into vi_handlers[] */
-		h = (u16 *)(b + ori_offset);
-		*h = n * sizeof(handler);
-		local_flush_icache_range((unsigned long)b,
-					 (unsigned long)(b+handler_len));
-	}
-	else {
+	if (handler_len > VECTORSPACING) {
 		/*
-		 * In other cases jump directly to the interrupt handler. It
-		 * is the handler's responsibility to save registers if required
-		 * (eg hi/lo) and return from the exception using "eret".
+		 * Sigh... panicing won't help as the console
+		 * is probably not configured :(
 		 */
-		u32 insn;
-
-		h = (u16 *)b;
-		/* j handler */
-#ifdef CONFIG_CPU_MICROMIPS
-		insn = 0xd4000000 | (((u32)handler & 0x07ffffff) >> 1);
-#else
-		insn = 0x08000000 | (((u32)handler & 0x0fffffff) >> 2);
-#endif
-		h[0] = (insn >> 16) & 0xffff;
-		h[1] = insn & 0xffff;
-		h[2] = 0;
-		h[3] = 0;
-		local_flush_icache_range((unsigned long)b,
-					 (unsigned long)(b+8));
+		panic("VECTORSPACING too small");
 	}
 
+	set_handler(((unsigned long)b - ebase), vec_start,
+#ifdef CONFIG_CPU_MICROMIPS
+			(handler_len - 1));
+#else
+			handler_len);
+#endif
+	/* insert offset into vi_handlers[] */
+	h = (u16 *)(b + ori_offset);
+	*h = n * sizeof(handler);
+	local_flush_icache_range((unsigned long)b,
+				 (unsigned long)(b+handler_len));
+
 	return (void *)old_handler;
 }
 
-void *set_vi_handler(int n, vi_handler_t addr)
-{
-	return set_vi_srs_handler(n, addr, 0);
-}
-
 extern void tlb_init(void);
 
 /*