diff mbox series

[03/23] dt-bindings: gpio: nomadik: add mobileye,eyeq5-gpio compatible

Message ID 20240214-mbly-gpio-v1-3-f88c0ccf372b@bootlin.com (mailing list archive)
State Superseded
Headers show
Series Rework Nomadik GPIO to add Mobileye EyeQ5 support | expand

Commit Message

Théo Lebrun Feb. 14, 2024, 4:23 p.m. UTC
This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its
compatible to the dt-bindings. One difference is that the block as
integrated on EyeQ5 does not support sleep-mode.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 .../devicetree/bindings/gpio/st,nomadik-gpio.yaml        | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski Feb. 15, 2024, 9:13 a.m. UTC | #1
On 14/02/2024 17:23, Théo Lebrun wrote:
> This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its
> compatible to the dt-bindings. One difference is that the block as
> integrated on EyeQ5 does not support sleep-mode.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  .../devicetree/bindings/gpio/st,nomadik-gpio.yaml        | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
> index bbd23daed229..e44cf292bc6d 100644
> --- a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
> @@ -19,7 +19,9 @@ properties:
>      pattern: "^gpio@[0-9a-f]+$"
>  
>    compatible:
> -    const: st,nomadik-gpio
> +    enum:
> +      - st,nomadik-gpio
> +      - mobileye,eyeq5-gpio
>  
>    reg:
>      maxItems: 1
> @@ -65,6 +67,18 @@ required:
>  
>  unevaluatedProperties: false
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: st,nomadik-gpio
> +    then:
> +      properties:
> +        st,supports-sleepmode:
> +          description: Whether the controller can sleep or not.
> +          $ref: /schemas/types.yaml#/definitions/flag

You already have such property, so you are defining it second time. You
want instead if: for eyeq5-gpio making it:
then:
  properties:
    st,supports-sleepmode: false

Best regards,
Krzysztof
Théo Lebrun Feb. 15, 2024, 9:52 a.m. UTC | #2
Hello,

On Thu Feb 15, 2024 at 10:13 AM CET, Krzysztof Kozlowski wrote:
> On 14/02/2024 17:23, Théo Lebrun wrote:
> > This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its
> > compatible to the dt-bindings. One difference is that the block as
> > integrated on EyeQ5 does not support sleep-mode.
> > 
> > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> > ---
> >  .../devicetree/bindings/gpio/st,nomadik-gpio.yaml        | 16 +++++++++++++++-
> >  1 file changed, 15 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
> > index bbd23daed229..e44cf292bc6d 100644
> > --- a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
> > +++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
> > @@ -19,7 +19,9 @@ properties:
> >      pattern: "^gpio@[0-9a-f]+$"
> >  
> >    compatible:
> > -    const: st,nomadik-gpio
> > +    enum:
> > +      - st,nomadik-gpio
> > +      - mobileye,eyeq5-gpio
> >  
> >    reg:
> >      maxItems: 1
> > @@ -65,6 +67,18 @@ required:
> >  
> >  unevaluatedProperties: false
> >  
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: st,nomadik-gpio
> > +    then:
> > +      properties:
> > +        st,supports-sleepmode:
> > +          description: Whether the controller can sleep or not.
> > +          $ref: /schemas/types.yaml#/definitions/flag
>
> You already have such property, so you are defining it second time. You
> want instead if: for eyeq5-gpio making it:
> then:
>   properties:
>     st,supports-sleepmode: false

Good catch. I hesitated between declaring the property inside an
if-statement or disabling it inside an if-statement as you show here. I
ended-up mixing those two approaches.

Wil pick the if-eyeq5-then-disable-prop solution.

Thanks for the review Krzysztof!

--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
index bbd23daed229..e44cf292bc6d 100644
--- a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
@@ -19,7 +19,9 @@  properties:
     pattern: "^gpio@[0-9a-f]+$"
 
   compatible:
-    const: st,nomadik-gpio
+    enum:
+      - st,nomadik-gpio
+      - mobileye,eyeq5-gpio
 
   reg:
     maxItems: 1
@@ -65,6 +67,18 @@  required:
 
 unevaluatedProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,nomadik-gpio
+    then:
+      properties:
+        st,supports-sleepmode:
+          description: Whether the controller can sleep or not.
+          $ref: /schemas/types.yaml#/definitions/flag
+
 examples:
   - |
     gpio1: gpio@8012e080 {