diff mbox series

[02/10] MIPS: dts: loongson: Fix liointc IRQ polarity

Message ID 20240614-ls3k-mips-v1-2-7614340ace7d@flygoat.com (mailing list archive)
State Accepted
Commit dbb69b9d6234aad23b3ecd33e5bc8a8ae1485b7d
Headers show
Series MIPS: Loongson64: Loongson-2K1000 fixes | expand

Commit Message

Jiaxun Yang June 14, 2024, 3:40 p.m. UTC 
All internal liointc interrupts are high level triggered.

Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 42 +++++++++++-----------
 1 file changed, 21 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index f5a74338bf05..3f5255584c30 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -93,7 +93,7 @@  rtc0: rtc@1fe07800 {
 			compatible = "loongson,ls2k1000-rtc";
 			reg = <0 0x1fe07800 0 0x78>;
 			interrupt-parent = <&liointc0>;
-			interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		uart0: serial@1fe00000 {
@@ -101,7 +101,7 @@  uart0: serial@1fe00000 {
 			reg = <0 0x1fe00000 0 0x8>;
 			clock-frequency = <125000000>;
 			interrupt-parent = <&liointc0>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			no-loopback-test;
 		};
 
@@ -124,8 +124,8 @@  gmac@3,0 {
 						   "pciclass0c03";
 
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
-					     <13 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&liointc0>;
 				phy-mode = "rgmii";
@@ -147,8 +147,8 @@  gmac@3,1 {
 						   "loongson, pci-gmac";
 
 				reg = <0x1900 0x0 0x0 0x0 0x0>;
-				interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
-					     <15 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&liointc0>;
 				phy-mode = "rgmii";
@@ -169,7 +169,7 @@  ehci@4,1 {
 						   "pciclass0c03";
 
 				reg = <0x2100 0x0 0x0 0x0 0x0>;
-				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 			};
 
@@ -180,7 +180,7 @@  ohci@4,2 {
 						   "pciclass0c03";
 
 				reg = <0x2200 0x0 0x0 0x0 0x0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 			};
 
@@ -191,7 +191,7 @@  sata@8,0 {
 						   "pciclass0106";
 
 				reg = <0x4000 0x0 0x0 0x0 0x0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc0>;
 			};
 
@@ -206,10 +206,10 @@  pcie@9,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -225,10 +225,10 @@  pcie@a,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -244,10 +244,10 @@  pcie@b,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -263,10 +263,10 @@  pcie@c,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -282,10 +282,10 @@  pcie@d,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -301,10 +301,10 @@  pcie@e,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};