diff mbox series

[v3,7/9] clocksource: realtek: Add timer driver for rtl-otto platforms

Message ID 20240627043317.3751996-8-chris.packham@alliedtelesis.co.nz (mailing list archive)
State New
Headers show
Series mips: Support for RTL9302C | expand

Commit Message

Chris Packham June 27, 2024, 4:33 a.m. UTC
The timer/counter block on the Realtek SoCs provides up to 5 timers. It
also includes a watchdog timer but this isn't being used currently (it
will be added as a separate wdt driver).

One timer will be used per CPU as a local clock event generator. An
additional timer will be used as an overal stable clocksource.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    This is derrived from openwrt[1],[2]. I've retained the original signoff
    and added my own.
    
    [1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob_plain;f=target/linux/realtek/files-5.15/drivers/clocksource/timer-rtl-otto.c;hb=HEAD
    [2] https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob_plain;f=target/linux/realtek/patches-5.15/302-clocksource-add-otto-driver.patch;hb=HEAD
    
    Changes in v3:
    - Remove unnecessary select COMMON_CLK
    - Use %p when printing pointer
    Changes in v2
    - None

 drivers/clocksource/Kconfig          |  10 +
 drivers/clocksource/Makefile         |   1 +
 drivers/clocksource/timer-rtl-otto.c | 287 +++++++++++++++++++++++++++
 include/linux/cpuhotplug.h           |   1 +
 4 files changed, 299 insertions(+)
 create mode 100644 drivers/clocksource/timer-rtl-otto.c

Comments

Marek BehĂșn June 27, 2024, 11:17 a.m. UTC | #1
On Thu, 27 Jun 2024 16:33:15 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> +/* Simple internal register functions */
> +static inline void rttm_set_counter(void __iomem *base, unsigned int counter)
> +{
> +	iowrite32(counter, base + RTTM_CNT);

These require #include <asm/io.h>

> +/* Aggregated control functions for kernel clock framework */
> +#define RTTM_DEBUG(base)			\
> +	pr_debug("------------- %d %p\n",	\
> +		 smp_processor_id(), base)

#include <linux/printk.h>

> +static irqreturn_t rttm_timer_interrupt(int irq, void *dev_id)
> +{
> +	struct clock_event_device *clkevt = dev_id;
> +	struct timer_of *to = to_timer_of(clkevt);
> +
> +	rttm_ack_irq(to->of_base.base);
> +	RTTM_DEBUG(to->of_base.base);
> +	clkevt->event_handler(clkevt);

Although you include "timer-of.h", which includes clockchips.h, please
do also explicit #include <linux/clockchips.h>

> +	rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ);

HZ -> linux/jiffies.h, or maybe asm/param.h

> +static u64 rttm_read_clocksource(struct clocksource *cs)
> +{
> +	struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs);
> +
> +	return (u64)rttm_get_counter(rcs->to.of_base.base);

Redundant cast to u64.

> +	rttm_enable_timer(rcs->to.of_base.base, RTTM_CTRL_TIMER,
> +			  rcs->to.of_clk.rate / RTTM_TICKS_PER_SEC);

Is this correct? Sometimes it makes sense to use DIV_ROUND_CLOSEST, but
maybe not here.

> +static u64 notrace rttm_read_clock(void)
> +{
> +	return (u64)rttm_get_counter(rttm_cs.to.of_base.base);

Redundant cast to u64.

> +static int __init rttm_probe(struct device_node *np)
> +{
> +	int cpu, cpu_rollback;

unsigned int?

> +	struct timer_of *to;
> +	int clkidx = num_possible_cpus();

linux/cpumask.h, unsigned int

Marek
Sander Vanheule June 29, 2024, 9:03 p.m. UTC | #2
Hi Chris,

On Thu, 2024-06-27 at 16:33 +1200, Chris Packham wrote:
> The timer/counter block on the Realtek SoCs provides up to 5 timers. It
> also includes a watchdog timer but this isn't being used currently (it
> will be added as a separate wdt driver).

Do you mean the watchdog timer supported by drivers/watchdog/realtek_otto_wdt.c? Or are
you referring to another watchdog timer?

> One timer will be used per CPU as a local clock event generator. An
> additional timer will be used as an overal stable clocksource.
> 
> Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
> Signed-off-by: Sander Vanheule <sander@svanheule.net>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---

For reference, I submitted a driver for the same hardware back in 2022, but didn't manage
to follow up to finalize the submission:

https://lore.kernel.org/all/cover.1642369117.git.sander@svanheule.net/


> +
> +/* Module initialization part. */
> +static DEFINE_PER_CPU(struct timer_of, rttm_to) = {
> +	.flags				= TIMER_OF_BASE | TIMER_OF_CLOCK |
> TIMER_OF_IRQ,
> +	.of_irq = {
> +		.flags			= IRQF_PERCPU | IRQF_TIMER,

In the original review of this code, I had some doubts about the use of IRQF_PERCPU. Maybe
the people in Cc can shed some light on this.

If I understand correctly, the SoC interrupts these timers use are not per-cpu interrupts.
(For comparison, AFAICT the MIPS CPU interrupts are)



> +		.handler		= rttm_timer_interrupt,
> +	},
> +	.clkevt = {
> +		.rating			= 400,
> +		.features		= CLOCK_EVT_FEAT_PERIODIC |
> CLOCK_EVT_FEAT_ONESHOT,

If the use of IRQF_PERCPU is appropriate, I wonder if the driver should also use
CLOCK_EVT_FEAT_PERCPU.


Best,
Sander
kernel test robot June 30, 2024, 1:10 a.m. UTC | #3
Hi Chris,

kernel test robot noticed the following build errors:

[auto build test ERROR on robh/for-next]
[also build test ERROR on tip/timers/core tip/irq/core tip/smp/core linus/master v6.10-rc5 next-20240628]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Chris-Packham/mips-dts-realtek-use-serial-instead-of-uart-in-node-name/20240627-202806
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20240627043317.3751996-8-chris.packham%40alliedtelesis.co.nz
patch subject: [PATCH v3 7/9] clocksource: realtek: Add timer driver for rtl-otto platforms
config: s390-randconfig-r133-20240629
compiler: s390-linux-gcc (GCC) 13.2.0
reproduce:

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406300803.mMM0Hpxv-lkp@intel.com/

All errors (new ones prefixed by >>):

   In file included from include/linux/io.h:14,
                    from include/linux/of_address.h:7,
                    from drivers/clocksource/timer-of.c:10:
   drivers/clocksource/timer-of.c: In function 'timer_of_base_exit':
>> arch/s390/include/asm/io.h:29:17: error: implicit declaration of function 'iounmap'; did you mean 'iommu_map'? [-Werror=implicit-function-declaration]
      29 | #define iounmap iounmap
         |                 ^~~~~~~
   drivers/clocksource/timer-of.c:151:9: note: in expansion of macro 'iounmap'
     151 |         iounmap(of_base->base);
         |         ^~~~~~~
   cc1: some warnings being treated as errors


vim +29 arch/s390/include/asm/io.h

cd24834130ac65 Jan Glauber 2012-11-29  24  
b43b3fff042d08 Baoquan He  2023-07-06  25  /*
b43b3fff042d08 Baoquan He  2023-07-06  26   * I/O memory mapping functions.
b43b3fff042d08 Baoquan He  2023-07-06  27   */
b43b3fff042d08 Baoquan He  2023-07-06  28  #define ioremap_prot ioremap_prot
b43b3fff042d08 Baoquan He  2023-07-06 @29  #define iounmap iounmap
b43b3fff042d08 Baoquan He  2023-07-06  30
Chris Packham July 1, 2024, 2:07 a.m. UTC | #4
On 30/06/24 09:03, Sander Vanheule wrote:
> Hi Chris,
>
> On Thu, 2024-06-27 at 16:33 +1200, Chris Packham wrote:
>> The timer/counter block on the Realtek SoCs provides up to 5 timers. It
>> also includes a watchdog timer but this isn't being used currently (it
>> will be added as a separate wdt driver).
> Do you mean the watchdog timer supported by drivers/watchdog/realtek_otto_wdt.c? Or are
> you referring to another watchdog timer?

Yes realtek_otto_wdt.c. I thought that was only on openwrt but looks 
like you've already landed that one. I'll reword my message to reflect that.

>> One timer will be used per CPU as a local clock event generator. An
>> additional timer will be used as an overal stable clocksource.
>>
>> Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
>> Signed-off-by: Sander Vanheule <sander@svanheule.net>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> ---
> For reference, I submitted a driver for the same hardware back in 2022, but didn't manage
> to follow up to finalize the submission:
>
> https://lore.kernel.org/all/cover.1642369117.git.sander@svanheule.net/
OK thanks for the link. I'll try and make sure I'm not rehashing things 
that have already been discussed.

>> +
>> +/* Module initialization part. */
>> +static DEFINE_PER_CPU(struct timer_of, rttm_to) = {
>> +	.flags				= TIMER_OF_BASE | TIMER_OF_CLOCK |
>> TIMER_OF_IRQ,
>> +	.of_irq = {
>> +		.flags			= IRQF_PERCPU | IRQF_TIMER,
> In the original review of this code, I had some doubts about the use of IRQF_PERCPU. Maybe
> the people in Cc can shed some light on this.
>
> If I understand correctly, the SoC interrupts these timers use are not per-cpu interrupts.
> (For comparison, AFAICT the MIPS CPU interrupts are)

I'm not exactly sure either and I've only got the single core RTL9302 to 
test with so if there were some difference I may not notice. Eventually 
we're planning a RTL931x based board so that may be something I can 
check then.

>> +		.handler		= rttm_timer_interrupt,
>> +	},
>> +	.clkevt = {
>> +		.rating			= 400,
>> +		.features		= CLOCK_EVT_FEAT_PERIODIC |
>> CLOCK_EVT_FEAT_ONESHOT,
> If the use of IRQF_PERCPU is appropriate, I wonder if the driver should also use
> CLOCK_EVT_FEAT_PERCPU.
>
>
> Best,
> Sander
>
diff mbox series

Patch

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 34faa0320ece..70ba57210862 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -134,6 +134,16 @@  config RDA_TIMER
 	help
 	  Enables the support for the RDA Micro timer driver.
 
+config REALTEK_OTTO_TIMER
+	bool "Clocksource/timer for the Realtek Otto platform"
+	select TIMER_OF
+	help
+	  This driver adds support for the timers found in the Realtek RTL83xx
+	  and RTL93xx SoCs series. This includes chips such as RTL8380, RTL8381
+	  and RTL832, as well as chips from the RTL839x series, such as RTL8390
+	  RT8391, RTL8392, RTL8393 and RTL8396 and chips of the RTL930x series
+	  such as RTL9301, RTL9302 or RTL9303.
+
 config SUN4I_TIMER
 	bool "Sun4i timer driver" if COMPILE_TEST
 	depends on HAS_IOMEM
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 4bb856e4df55..22743785299e 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -59,6 +59,7 @@  obj-$(CONFIG_MILBEAUT_TIMER)	+= timer-milbeaut.o
 obj-$(CONFIG_SPRD_TIMER)	+= timer-sprd.o
 obj-$(CONFIG_NPCM7XX_TIMER)	+= timer-npcm7xx.o
 obj-$(CONFIG_RDA_TIMER)		+= timer-rda.o
+obj-$(CONFIG_REALTEK_OTTO_TIMER)	+= timer-rtl-otto.o
 
 obj-$(CONFIG_ARC_TIMERS)		+= arc_timer.o
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
diff --git a/drivers/clocksource/timer-rtl-otto.c b/drivers/clocksource/timer-rtl-otto.c
new file mode 100644
index 000000000000..f1b9d35eacd1
--- /dev/null
+++ b/drivers/clocksource/timer-rtl-otto.c
@@ -0,0 +1,287 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include "timer-of.h"
+
+#define RTTM_DATA		0x0
+#define RTTM_CNT		0x4
+#define RTTM_CTRL		0x8
+#define RTTM_INT		0xc
+
+#define RTTM_CTRL_ENABLE	BIT(28)
+#define RTTM_INT_PENDING	BIT(16)
+#define RTTM_INT_ENABLE		BIT(20)
+
+/*
+ * The Otto platform provides multiple 28 bit timers/counters with the following
+ * operating logic. If enabled the timer counts up. Per timer one can set a
+ * maximum counter value as an end marker. If end marker is reached the timer
+ * fires an interrupt. If the timer "overflows" by reaching the end marker or
+ * by adding 1 to 0x0fffffff the counter is reset to 0. When this happens and
+ * the timer is in operating mode COUNTER it stops. In mode TIMER it will
+ * continue to count up.
+ */
+#define RTTM_CTRL_COUNTER	0
+#define RTTM_CTRL_TIMER		BIT(24)
+
+#define RTTM_BIT_COUNT		28
+#define RTTM_MIN_DELTA		8
+#define RTTM_MAX_DELTA		CLOCKSOURCE_MASK(28)
+
+/*
+ * Timers are derived from the LXB clock frequency. Usually this is a fixed
+ * multiple of the 25 MHz oscillator. The 930X SOC is an exception from that.
+ * Its LXB clock has only dividers and uses the switch PLL of 2.45 GHz as its
+ * base. The only meaningful frequencies we can achieve from that are 175.000
+ * MHz and 153.125 MHz. The greatest common divisor of all explained possible
+ * speeds is 3125000. Pin the timers to this 3.125 MHz reference frequency.
+ */
+#define RTTM_TICKS_PER_SEC	3125000
+
+struct rttm_cs {
+	struct timer_of		to;
+	struct clocksource	cs;
+};
+
+/* Simple internal register functions */
+static inline void rttm_set_counter(void __iomem *base, unsigned int counter)
+{
+	iowrite32(counter, base + RTTM_CNT);
+}
+
+static inline unsigned int rttm_get_counter(void __iomem *base)
+{
+	return ioread32(base + RTTM_CNT);
+}
+
+static inline void rttm_set_period(void __iomem *base, unsigned int period)
+{
+	iowrite32(period, base + RTTM_DATA);
+}
+
+static inline void rttm_disable_timer(void __iomem *base)
+{
+	iowrite32(0, base + RTTM_CTRL);
+}
+
+static inline void rttm_enable_timer(void __iomem *base, u32 mode, u32 divisor)
+{
+	iowrite32(RTTM_CTRL_ENABLE | mode | divisor, base + RTTM_CTRL);
+}
+
+static inline void rttm_ack_irq(void __iomem *base)
+{
+	iowrite32(ioread32(base + RTTM_INT) | RTTM_INT_PENDING, base + RTTM_INT);
+}
+
+static inline void rttm_enable_irq(void __iomem *base)
+{
+	iowrite32(RTTM_INT_ENABLE, base + RTTM_INT);
+}
+
+static inline void rttm_disable_irq(void __iomem *base)
+{
+	iowrite32(0, base + RTTM_INT);
+}
+
+/* Aggregated control functions for kernel clock framework */
+#define RTTM_DEBUG(base)			\
+	pr_debug("------------- %d %p\n",	\
+		 smp_processor_id(), base)
+
+static irqreturn_t rttm_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *clkevt = dev_id;
+	struct timer_of *to = to_timer_of(clkevt);
+
+	rttm_ack_irq(to->of_base.base);
+	RTTM_DEBUG(to->of_base.base);
+	clkevt->event_handler(clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static void rttm_stop_timer(void __iomem *base)
+{
+	rttm_disable_timer(base);
+	rttm_ack_irq(base);
+}
+
+static void rttm_start_timer(struct timer_of *to, u32 mode)
+{
+	rttm_set_counter(to->of_base.base, 0);
+	rttm_enable_timer(to->of_base.base, mode, to->of_clk.rate / RTTM_TICKS_PER_SEC);
+}
+
+static int rttm_next_event(unsigned long delta, struct clock_event_device *clkevt)
+{
+	struct timer_of *to = to_timer_of(clkevt);
+
+	RTTM_DEBUG(to->of_base.base);
+	rttm_stop_timer(to->of_base.base);
+	rttm_set_period(to->of_base.base, delta);
+	rttm_start_timer(to, RTTM_CTRL_COUNTER);
+
+	return 0;
+}
+
+static int rttm_state_oneshot(struct clock_event_device *clkevt)
+{
+	struct timer_of *to = to_timer_of(clkevt);
+
+	RTTM_DEBUG(to->of_base.base);
+	rttm_stop_timer(to->of_base.base);
+	rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ);
+	rttm_start_timer(to, RTTM_CTRL_COUNTER);
+
+	return 0;
+}
+
+static int rttm_state_periodic(struct clock_event_device *clkevt)
+{
+	struct timer_of *to = to_timer_of(clkevt);
+
+	RTTM_DEBUG(to->of_base.base);
+	rttm_stop_timer(to->of_base.base);
+	rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ);
+	rttm_start_timer(to, RTTM_CTRL_TIMER);
+
+	return 0;
+}
+
+static int rttm_state_shutdown(struct clock_event_device *clkevt)
+{
+	struct timer_of *to = to_timer_of(clkevt);
+
+	RTTM_DEBUG(to->of_base.base);
+	rttm_stop_timer(to->of_base.base);
+
+	return 0;
+}
+
+static void rttm_setup_timer(void __iomem *base)
+{
+	RTTM_DEBUG(base);
+	rttm_stop_timer(base);
+	rttm_set_period(base, 0);
+}
+
+static u64 rttm_read_clocksource(struct clocksource *cs)
+{
+	struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs);
+
+	return (u64)rttm_get_counter(rcs->to.of_base.base);
+}
+
+/* Module initialization part. */
+static DEFINE_PER_CPU(struct timer_of, rttm_to) = {
+	.flags				= TIMER_OF_BASE | TIMER_OF_CLOCK | TIMER_OF_IRQ,
+	.of_irq = {
+		.flags			= IRQF_PERCPU | IRQF_TIMER,
+		.handler		= rttm_timer_interrupt,
+	},
+	.clkevt = {
+		.rating			= 400,
+		.features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+		.set_state_periodic	= rttm_state_periodic,
+		.set_state_shutdown	= rttm_state_shutdown,
+		.set_state_oneshot	= rttm_state_oneshot,
+		.set_next_event		= rttm_next_event
+	},
+};
+
+static int rttm_enable_clocksource(struct clocksource *cs)
+{
+	struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs);
+
+	rttm_disable_irq(rcs->to.of_base.base);
+	rttm_setup_timer(rcs->to.of_base.base);
+	rttm_enable_timer(rcs->to.of_base.base, RTTM_CTRL_TIMER,
+			  rcs->to.of_clk.rate / RTTM_TICKS_PER_SEC);
+
+	return 0;
+}
+
+struct rttm_cs rttm_cs = {
+	.to = {
+		.flags	= TIMER_OF_BASE | TIMER_OF_CLOCK,
+	},
+	.cs = {
+		.name	= "realtek_otto_timer",
+		.rating	= 400,
+		.mask	= CLOCKSOURCE_MASK(RTTM_BIT_COUNT),
+		.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+		.read	= rttm_read_clocksource,
+	}
+};
+
+static u64 notrace rttm_read_clock(void)
+{
+	return (u64)rttm_get_counter(rttm_cs.to.of_base.base);
+}
+
+static int rttm_cpu_starting(unsigned int cpu)
+{
+	struct timer_of *to = per_cpu_ptr(&rttm_to, cpu);
+
+	RTTM_DEBUG(to->of_base.base);
+	to->clkevt.cpumask = cpumask_of(cpu);
+	irq_force_affinity(to->of_irq.irq, to->clkevt.cpumask);
+	clockevents_config_and_register(&to->clkevt, RTTM_TICKS_PER_SEC,
+					RTTM_MIN_DELTA, RTTM_MAX_DELTA);
+	rttm_enable_irq(to->of_base.base);
+
+	return 0;
+}
+
+static int __init rttm_probe(struct device_node *np)
+{
+	int cpu, cpu_rollback;
+	struct timer_of *to;
+	int clkidx = num_possible_cpus();
+
+	/* Use the first n timers as per CPU clock event generators */
+	for_each_possible_cpu(cpu) {
+		to = per_cpu_ptr(&rttm_to, cpu);
+		to->of_irq.index = to->of_base.index = cpu;
+		if (timer_of_init(np, to)) {
+			pr_err("setup of timer %d failed\n", cpu);
+			goto rollback;
+		}
+		rttm_setup_timer(to->of_base.base);
+	}
+
+	/* Activate the n'th + 1 timer as a stable CPU clocksource. */
+	to = &rttm_cs.to;
+	to->of_base.index = clkidx;
+	timer_of_init(np, to);
+	if (rttm_cs.to.of_base.base && rttm_cs.to.of_clk.rate) {
+		rttm_enable_clocksource(&rttm_cs.cs);
+		clocksource_register_hz(&rttm_cs.cs, RTTM_TICKS_PER_SEC);
+		sched_clock_register(rttm_read_clock, RTTM_BIT_COUNT, RTTM_TICKS_PER_SEC);
+	} else
+		pr_err(" setup of timer %d as clocksource failed", clkidx);
+
+	return cpuhp_setup_state(CPUHP_AP_REALTEK_TIMER_STARTING,
+				"timer/realtek:online",
+				rttm_cpu_starting, NULL);
+rollback:
+	pr_err("timer registration failed\n");
+	for_each_possible_cpu(cpu_rollback) {
+		if (cpu_rollback == cpu)
+			break;
+		to = per_cpu_ptr(&rttm_to, cpu_rollback);
+		timer_of_cleanup(to);
+	}
+
+	return -EINVAL;
+}
+
+TIMER_OF_DECLARE(otto_timer, "realtek,otto-timer", rttm_probe);
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 7a5785f405b6..56b744dc1317 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -171,6 +171,7 @@  enum cpuhp_state {
 	CPUHP_AP_ARMADA_TIMER_STARTING,
 	CPUHP_AP_MIPS_GIC_TIMER_STARTING,
 	CPUHP_AP_ARC_TIMER_STARTING,
+	CPUHP_AP_REALTEK_TIMER_STARTING,
 	CPUHP_AP_RISCV_TIMER_STARTING,
 	CPUHP_AP_CLINT_TIMER_STARTING,
 	CPUHP_AP_CSKY_TIMER_STARTING,