| Message ID | 20240909014707.2003091-3-chris.packham@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | mips: realtek: Add reboot support | expand |
On 09/09/2024 03:47, Chris Packham wrote: > The board level reset on systems using the RTL9302 can be driven via the > switch. Use a syscon-reboot node to represent this. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > .../dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts | 3 +++ > arch/mips/boot/dts/realtek/rtl930x.dtsi | 11 +++++++++++ > 2 files changed, 14 insertions(+) > > diff --git a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts > index 77d2566545f2..a517135446a3 100644 > --- a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts > +++ b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts > @@ -71,3 +71,6 @@ partition@1180000 { > }; > }; > }; > +&switch0 { > + status = "okay"; > +}; Drop, redundant. Best regards, Krzysztof
diff --git a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts index 77d2566545f2..a517135446a3 100644 --- a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts +++ b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts @@ -71,3 +71,6 @@ partition@1180000 { }; }; }; +&switch0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi index f271940f82be..cf1b38b6c353 100644 --- a/arch/mips/boot/dts/realtek/rtl930x.dtsi +++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi @@ -29,6 +29,17 @@ lx_clk: clock-175mhz { #clock-cells = <0>; clock-frequency = <175000000>; }; + + switch0: switch@1b000000 { + compatible = "realtek,rtl9302c-switch", "syscon", "simple-mfd"; + reg = <0x1b000000 0x10000>; + + reboot { + compatible = "syscon-reboot"; + offset = <0x0c>; + value = <0x01>; + }; + }; }; &soc {
The board level reset on systems using the RTL9302 can be driven via the switch. Use a syscon-reboot node to represent this. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- .../dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts | 3 +++ arch/mips/boot/dts/realtek/rtl930x.dtsi | 11 +++++++++++ 2 files changed, 14 insertions(+)