| Message ID | 20240913024948.1317786-3-chris.packham@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | mips: realtek: Add reboot support | expand |
diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi index f271940f82be..cf1b38b6c353 100644 --- a/arch/mips/boot/dts/realtek/rtl930x.dtsi +++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi @@ -29,6 +29,17 @@ lx_clk: clock-175mhz { #clock-cells = <0>; clock-frequency = <175000000>; }; + + switch0: switch@1b000000 { + compatible = "realtek,rtl9302c-switch", "syscon", "simple-mfd"; + reg = <0x1b000000 0x10000>; + + reboot { + compatible = "syscon-reboot"; + offset = <0x0c>; + value = <0x01>; + }; + }; }; &soc {
The board level reset on systems using the RTL9302 can be driven via the switch. Use a syscon-reboot node to represent this. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v2: - drop redundant status = "okay" arch/mips/boot/dts/realtek/rtl930x.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)